[PATCH 4.14 173/267] ARM: dts: pandora-common: define wl1251 as child node of mmc3

[Greg Kroah-Hartman]

From: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>

commit 4f9007d692017cef38baf2a9b82b7879d5b2407b upstream.

Since v4.7 the dma initialization requires that there is a
device tree property for "rx" and "tx" channels which is
not provided by the pdata-quirks initialization.

By conversion of the mmc3 setup to device tree this will
finally allows to remove the OpenPandora wlan specific omap3
data-quirks.

Fixes: 81eef6ca9201 ("mmc: omap_hsmmc: Use dma_request_chan() for requesting DMA channel")
Signed-off-by: H. Nikolaus Schaller <hns@xxxxxxxxxxxxx>
Cc: <stable@xxxxxxxxxxxxxxx> # v4.7+
Acked-by: Tony Lindgren <tony@xxxxxxxxxxx>
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
 arch/arm/boot/dts/omap3-pandora-common.dtsi |   36 ++++++++++++++++++++++++++--
 1 file changed, 34 insertions(+), 2 deletions(-)

--- a/arch/arm/boot/dts/omap3-pandora-common.dtsi
+++ b/arch/arm/boot/dts/omap3-pandora-common.dtsi
@@ -221,6 +221,17 @@
 		gpio = <&gpio6 4 GPIO_ACTIVE_HIGH>;	/* GPIO_164 */
 	};
 
+	/* wl1251 wifi+bt module */
+	wlan_en: fixed-regulator-wg7210_en {
+		compatible = "regulator-fixed";
+		regulator-name = "vwlan";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <50000>;
+		enable-active-high;
+		gpio = <&gpio1 23 GPIO_ACTIVE_HIGH>;
+	};
+
 	/* wg7210 (wifi+bt module) 32k clock buffer */
 	wg7210_32k: fixed-regulator-wg7210_32k {
 		compatible = "regulator-fixed";
@@ -514,9 +525,30 @@
 	/*wp-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;*/	/* GPIO_127 */
 };
 
-/* mmc3 is probed using pdata-quirks to pass wl1251 card data */
 &mmc3 {
-	status = "disabled";
+	vmmc-supply = <&wlan_en>;
+
+	bus-width = <4>;
+	non-removable;
+	ti,non-removable;
+	cap-power-off-card;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc3_pins>;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wlan: wifi@1 {
+		compatible = "ti,wl1251";
+
+		reg = <1>;
+
+		interrupt-parent = <&gpio1>;
+		interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;	/* GPIO_21 */
+
+		ti,wl1251-has-eeprom;
+	};
 };
 
 /* bluetooth*/