Re: [PATCH v3 2/3] dt-bindings: display: panel: Add binding document for Xinpeng XPP055C272

From: Heiko Stübner
Date: Tue Dec 17 2019 - 17:53:36 EST


Hi Maxime,

Am Dienstag, 17. Dezember 2019, 17:01:22 CET schrieb Maxime Ripard:
> On Tue, Dec 17, 2019 at 04:08:49PM +0100, Heiko Stübner wrote:
> > Am Dienstag, 17. Dezember 2019, 15:24:46 CET schrieb Maxime Ripard:
> > > Hi,
> > >
> > > On Tue, Dec 17, 2019 at 03:07:02PM +0100, Heiko Stuebner wrote:
> > > > From: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
> > > >
> > > > The XPP055C272 is a 5.5" 720x1280 DSI display.
> > > >
> > > > changes in v2:
> > > > - add size info into binding title (Sam)
> > > > - add more required properties (Sam)
> > > >
> > > > Signed-off-by: Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
> > > > Reviewed-by: Sam Ravnborg <sam@xxxxxxxxxxxx>
> > > > ---
> > > > .../display/panel/xinpeng,xpp055c272.yaml | 48 +++++++++++++++++++
> > > > 1 file changed, 48 insertions(+)
> > > > create mode 100644 Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
> > > >
> > > > diff --git a/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
> > > > new file mode 100644
> > > > index 000000000000..2d0fc97d735c
> > > > --- /dev/null
> > > > +++ b/Documentation/devicetree/bindings/display/panel/xinpeng,xpp055c272.yaml
> > > > @@ -0,0 +1,48 @@
> > > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > > +%YAML 1.2
> > > > +---
> > > > +$id: http://devicetree.org/schemas/display/panel/sony,acx424akp.yaml#
> > >
> > > The ID doesn't match the file name.
> > >
> > > Did you run dt_bindings_check?
> >
> > Thanks for that pointer ... I did run dtbs_check on the binding and was
> > sooo happy to not find any panel errors in the pages of other dt errors
> > but till now didn't realize that there's also a dtbinding_check.
>
> dt_bindings_check is a sanity check on the bindings
> themselves. dtbs_check is using those bindings to check the device
> trees.
>
> dtbs_check used to have a dependency on dt_bindings_check, but it got
> removed recently.
>
> Maxime
>
> >
> > Will keep that in mind for future bindings - and of course fix things
> > in the next version.
> >
> >
> > > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > > +
> > > > +title: Xinpeng XPP055C272 5.5in 720x1280 DSI panel
> > > > +
> > > > +maintainers:
> > > > + - Heiko Stuebner <heiko.stuebner@xxxxxxxxxxxxxxxxxxxxx>
> > > > +
> > > > +allOf:
> > > > + - $ref: panel-common.yaml#
> > > > +
> > > > +properties:
> > > > + compatible:
> > > > + const: xinpeng,xpp055c272
> > > > + reg: true
> > > > + backlight: true
> > > > + port: true
> > >
> > > What is the port supposed to be doing?
> >
> > Hooking the display up to the dsi controller. But you're right,
> > works without port as well with these single-dsi displays.
> >
> > I just remember needing one for the Gru-Scarlet display that needed
> > to connect to two dsi controllers.
> >
> > So I'll drop the port node here and from my board devicetree.
>
> It's not really what I meant though :)
>
> If it's needed then we should definitely have it, but we should
> document our expectations here: is it the input port ? output? in
> which case do we want to use it since it's optional, etc.

The port was actually unnecessary. As far as I understand dsi stuff,
the common case is the panel as subnode of the dsi controller and
the controller then finding the display itself automatically.

If you look at
"drm/bridge/synopsys: dsi: use mipi_dsi_device to find panel or bridge" [0]
I just sent, you'll see that the dw-mipi-dsi used drm_of_find_panel_or_bridge
to find its panel/bridge thus requiring port connections in all cases where
it had the dsi-device available already, so wouldn't need to use ports for it.

Or I'm completely wrong and port usage is better, we'll see :-D


Heiko


[0] https://patchwork.freedesktop.org/patch/345666/