Re: [PATCH 3/3] drivers/irqchip: enable INTMUX interrupt controller driver

[Marc Zyngier]

On 2019-12-18 07:20, Joakim Zhang wrote:
> Enable INTMUX interrupt controller driver for i.MX platforms.
>
> Signed-off-by: Joakim Zhang <qiangqing.zhang@xxxxxxx>
> ---
>  drivers/irqchip/Kconfig  | 6 ++++++
>  drivers/irqchip/Makefile | 1 +
>  2 files changed, 7 insertions(+)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index ba152954324b..7e2b1e9d0b45 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -457,6 +457,12 @@ config IMX_IRQSTEER
>  	help
>  	  Support for the i.MX IRQSTEER interrupt multiplexer/remapper.
>
> +config IMX_INTMUX
> +	def_bool y if ARCH_MXC
> +	select IRQ_DOMAIN
> +	help
> +	  Support for the i.MX INTMUX interrupt multiplexer.
> +
>  config LS1X_IRQ
>  	bool "Loongson-1 Interrupt Controller"
>  	depends on MACH_LOONGSON32
> diff --git a/drivers/irqchip/Makefile b/drivers/irqchip/Makefile
> index e806dda690ea..af976a79d1fb 100644
> --- a/drivers/irqchip/Makefile
> +++ b/drivers/irqchip/Makefile
> @@ -100,6 +100,7 @@ obj-$(CONFIG_CSKY_MPINTC)		+= irq-csky-mpintc.o
>  obj-$(CONFIG_CSKY_APB_INTC)		+= irq-csky-apb-intc.o
>  obj-$(CONFIG_SIFIVE_PLIC)		+= irq-sifive-plic.o
>  obj-$(CONFIG_IMX_IRQSTEER)		+= irq-imx-irqsteer.o
> +obj-$(CONFIG_IMX_INTMUX)		+= irq-imx-intmux.o
>  obj-$(CONFIG_MADERA_IRQ)		+= irq-madera.o
>  obj-$(CONFIG_LS1X_IRQ)			+= irq-ls1x.o
>  obj-$(CONFIG_TI_SCI_INTR_IRQCHIP)	+= irq-ti-sci-intr.o

Please merge this with the previous patch, it doesn't really warrant
a separate patch.

Thanks,

        M.
--
Jazz is not dead. It just smells funny...