Re: [PATCH V2 3/6] dt-bindings: clk: sprd: add bindings for sc9863a clock controller

From: Rob Herring
Date: Thu Dec 26 2019 - 13:56:28 EST


On Mon, Dec 16, 2019 at 08:19:29PM +0800, Chunyan Zhang wrote:
> From: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
>
> add a new bindings to describe sc9863a clock compatible string.
>
> Signed-off-by: Chunyan Zhang <chunyan.zhang@xxxxxxxxxx>
> ---
> .../bindings/clock/sprd,sc9863a-clk.yaml | 77 +++++++++++++++++++
> 1 file changed, 77 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
>
> diff --git a/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
> new file mode 100644
> index 000000000000..881f0a0287e5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/clock/sprd,sc9863a-clk.yaml
> @@ -0,0 +1,77 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +# Copyright 2019 Unisoc Inc.
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/clock/sprd,sc9863a-clk.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: SC9863A Clock Control Unit Device Tree Bindings
> +
> +maintainers:
> + - Orson Zhai <orsonzhai@xxxxxxxxx>
> + - Baolin Wang <baolin.wang7@xxxxxxxxx>
> + - Chunyan Zhang <zhang.lyra@xxxxxxxxx>
> +
> +properties:
> + "#clock-cells":
> + const: 1
> +
> + compatible :
> + enum:
> + - sprd,sc9863a-ap-clk
> + - sprd,sc9863a-pmu-gate
> + - sprd,sc9863a-pll
> + - sprd,sc9863a-mpll
> + - sprd,sc9863a-rpll
> + - sprd,sc9863a-dpll
> + - sprd,sc9863a-aon-clk
> + - sprd,sc9863a-apahb-gate
> + - sprd,sc9863a-aonapb-gate
> + - sprd,sc9863a-mm-gate
> + - sprd,sc9863a-mm-clk
> + - sprd,sc9863a-vspahb-gate
> + - sprd,sc9863a-apapb-gate

These will probably need to be split to separate schemas for the reasons
below...

> +
> + clocks:
> + description: |
> + The input parent clock(s) phandle for this clock, only list fixed
> + clocks which are decleared in devicetree.

typo.

You need to define how many clocks.

> +
> + clock-names:
> + description: |
> + Clock name strings used for driver to reference.

You need to list out the names.

> +
> + reg:
> + description: |
> + Contain the registers base address and length. It must be configured
> + only if no 'sprd,syscon' under the node.
> +
> + sprd,syscon:
> + $ref: '/schemas/types.yaml#/definitions/phandle'
> + description: |
> + The phandle to the syscon which is in the same address area with
> + the clock, and so we can get regmap for the clocks from the
> + syscon device.

It is preferred to make the clock node a child of the syscon and then
you don't need this property.

> +
> +required:
> + - compatible
> + - '#clock-cells'
> +
> +examples:
> + - |
> + ap_clk: clock-controller@21500000 {
> + compatible = "sprd,sc9863a-ap-clk";
> + reg = <0 0x21500000 0 0x1000>;
> + clocks = <&ext_32k>, <&ext_26m>;
> + clock-names = "ext-32k", "ext-26m";
> + #clock-cells = <1>;
> + };
> +
> + - |
> + apahb_gate: apahb-gate {
> + compatible = "sprd,sc9863a-apahb-gate";
> + sprd,syscon = <&ap_ahb_regs>;
> + #clock-cells = <1>;
> + };
> +
> +...
> --
> 2.20.1
>