[PATCH 5.4 193/434] net: phy: dp83867: enable robust auto-mdix

From: Greg Kroah-Hartman
Date: Sun Dec 29 2019 - 12:51:44 EST


From: Grygorii Strashko <grygorii.strashko@xxxxxx>

[ Upstream commit 5a7f08c2abb0efc9d17aff2fc75d6d3b85e622e4 ]

The link detection timeouts can be observed (or link might not be detected
at all) when dp83867 PHY is configured in manual mode (speed/duplex).

CFG3[9] Robust Auto-MDIX option allows to significantly improve link detection
in case dp83867 is configured in manual mode and reduce link detection
time.
As per DM: "If link partners are configured to operational modes that are
not supported by normal Auto MDI/MDIX mode (like Auto-Neg versus Force
100Base-TX or Force 100Base-TX versus Force 100Base-TX), this Robust Auto
MDI/MDIX mode allows MDI/MDIX resolution and prevents deadlock."

Hence, enable this option by default as there are no known reasons
not to do so.

Signed-off-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/net/phy/dp83867.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c
index 37fceaf9fa10..cf4455bbf888 100644
--- a/drivers/net/phy/dp83867.c
+++ b/drivers/net/phy/dp83867.c
@@ -95,6 +95,10 @@
#define DP83867_IO_MUX_CFG_CLK_O_SEL_MASK (0x1f << 8)
#define DP83867_IO_MUX_CFG_CLK_O_SEL_SHIFT 8

+/* CFG3 bits */
+#define DP83867_CFG3_INT_OE BIT(7)
+#define DP83867_CFG3_ROBUST_AUTO_MDIX BIT(9)
+
/* CFG4 bits */
#define DP83867_CFG4_PORT_MIRROR_EN BIT(0)

@@ -410,12 +414,13 @@ static int dp83867_config_init(struct phy_device *phydev)
phy_write_mmd(phydev, DP83867_DEVADDR, DP83867_SGMIICTL, val);
}

+ val = phy_read(phydev, DP83867_CFG3);
/* Enable Interrupt output INT_OE in CFG3 register */
- if (phy_interrupt_is_valid(phydev)) {
- val = phy_read(phydev, DP83867_CFG3);
- val |= BIT(7);
- phy_write(phydev, DP83867_CFG3, val);
- }
+ if (phy_interrupt_is_valid(phydev))
+ val |= DP83867_CFG3_INT_OE;
+
+ val |= DP83867_CFG3_ROBUST_AUTO_MDIX;
+ phy_write(phydev, DP83867_CFG3, val);

if (dp83867->port_mirroring != DP83867_PORT_MIRROING_KEEP)
dp83867_config_port_mirroring(phydev);
--
2.20.1