Dell OptiPlex 7010: wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
From: Paul Menzel
Date: Thu Jan 02 2020 - 05:55:16 EST
Dear Darren, dear Mario,
After updating the firmware for the Dell OptiPlex 7010 from BIOS A14 (06/10/2013)
to BIOS A29 (06/28/2018), Linux, for example, 4.14.87 and 5.4.5, displays the
warning below.
[ 9.172248] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
Please find the output of `dmesg` attached.
Can there anything done about that besides Dell fixing the firmware? What are
the consequences of this firmware bug, which causes the Linux kernel to
ignore the data block?
Kind regards,
Paul
```
$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller [8086:0150] (rev 09)
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port [8086:0151] (rev 09)
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04)
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) [8086:1502] (rev 04)
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04)
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04)
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a4)
00:1f.0 ISA bridge [0601]: Intel Corporation Q77 Express Chipset LPC Controller [8086:1e47] (rev 04)
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e02] (rev 04)
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C216 Chipset Family SMBus Controller [8086:1e22] (rev 04)
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108GL [Quadro 600] [10de:0df8] (rev a1)
01:00.1 Audio device [0403]: NVIDIA Corporation GF108 High Definition Audio Controller [10de:0bea] (rev a1)
$ lsusb
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 002: ID 413c:2107 Dell Computer Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
```
[ 0.000000] Linux version 5.4.5.mx64.305 (root@xxxxxxxxxxxxxxxxxxxxx) (gcc version 7.5.0 (GCC)) #1 SMP Thu Dec 19 17:36:25 CET 2019
[ 0.000000] Command line: BOOT_IMAGE=/boot/bzImage-5.4.5.mx64.305 root=LABEL=root ro crashkernel=256M console=ttyS1,115200n8 console=tty0 init=/bin/systemd audit=0
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000d5db3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d5db4000-0x00000000d5df6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000d5df7000-0x00000000db709fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db70a000-0x00000000db7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db800000-0x00000000dbf55fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dbf56000-0x00000000dbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dc000000-0x00000000dc7b3fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dc7b4000-0x00000000dc7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dc800000-0x00000000ddf1dfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ddf1e000-0x00000000ddffffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000de000000-0x00000000df600fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000df601000-0x00000000df7fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021dffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Dell Inc. OptiPlex 7010/0KRC95, BIOS A29 06/28/2018
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3392.335 MHz processor
[ 0.001195] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.001196] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.001201] last_pfn = 0x21e000 max_arch_pfn = 0x400000000
[ 0.001204] MTRR default type: uncachable
[ 0.001204] MTRR fixed ranges enabled:
[ 0.001205] 00000-9FFFF write-back
[ 0.001206] A0000-BFFFF uncachable
[ 0.001206] C0000-CFFFF write-protect
[ 0.001207] D0000-E7FFF uncachable
[ 0.001207] E8000-FFFFF write-protect
[ 0.001207] MTRR variable ranges enabled:
[ 0.001208] 0 base 000000000 mask E00000000 write-back
[ 0.001209] 1 base 200000000 mask FF0000000 write-back
[ 0.001210] 2 base 210000000 mask FF8000000 write-back
[ 0.001210] 3 base 218000000 mask FFC000000 write-back
[ 0.001211] 4 base 21C000000 mask FFE000000 write-back
[ 0.001211] 5 base 0E0000000 mask FE0000000 uncachable
[ 0.001212] 6 disabled
[ 0.001212] 7 disabled
[ 0.001213] 8 disabled
[ 0.001213] 9 disabled
[ 0.001567] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.001967] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[ 0.001969] last_pfn = 0xdf601 max_arch_pfn = 0x400000000
[ 0.009263] found SMP MP-table at [mem 0x000fda10-0x000fda1f]
[ 0.009275] BRK [0x02c01000, 0x02c01fff] PGTABLE
[ 0.009276] BRK [0x02c02000, 0x02c02fff] PGTABLE
[ 0.009276] BRK [0x02c03000, 0x02c03fff] PGTABLE
[ 0.009316] BRK [0x02c04000, 0x02c04fff] PGTABLE
[ 0.009406] BRK [0x02c05000, 0x02c05fff] PGTABLE
[ 0.009669] BRK [0x02c06000, 0x02c06fff] PGTABLE
[ 0.010163] RAMDISK: [mem 0x375e7000-0x37aeafff]
[ 0.010169] ACPI: Early table checksum verification disabled
[ 0.010172] ACPI: RSDP 0x00000000000F0490 000024 (v02 DELL )
[ 0.010174] ACPI: XSDT 0x00000000DC7F4078 000074 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.010179] ACPI: FACP 0x00000000DC7FE258 00010C (v05 DELL CBX3 01072009 AMI 00010013)
[ 0.010183] ACPI: DSDT 0x00000000DC7F4180 00A0D6 (v02 DELL CBX3 00000022 INTL 20091112)
[ 0.010185] ACPI: FACS 0x00000000DDFFE080 000040
[ 0.010187] ACPI: APIC 0x00000000DC7FE368 000092 (v03 DELL CBX3 01072009 AMI 00010013)
[ 0.010189] ACPI: FPDT 0x00000000DC7FE400 000044 (v01 DELL CBX3 01072009 AMI 00010013)
[ 0.010191] ACPI: MCFG 0x00000000DC7FE448 00003C (v01 DELL CBX3 01072009 MSFT 00000097)
[ 0.010193] ACPI: HPET 0x00000000DC7FE488 000038 (v01 DELL CBX3 01072009 AMI. 00000005)
[ 0.010195] ACPI: SSDT 0x00000000DC7FE4C0 000415 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.010198] ACPI: SSDT 0x00000000DC7FE8D8 0009B9 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.010200] ACPI: SSDT 0x00000000DC7FF298 000B22 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.010202] ACPI: DMAR 0x00000000DC7FFDC0 000080 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.010204] ACPI: ASF! 0x00000000DC7FFE40 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.010210] ACPI: Local APIC address 0xfee00000
[ 0.010275] No NUMA configuration found
[ 0.010276] Faking a node at [mem 0x0000000000000000-0x000000021dffffff]
[ 0.010279] NODE_DATA(0) allocated [mem 0x21dff1000-0x21dff4fff]
[ 0.010285] Reserving 256MB of memory at 3152MB for crashkernel (System RAM: 8146MB)
[ 0.010296] Zone ranges:
[ 0.010296] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.010297] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.010298] Normal [mem 0x0000000100000000-0x000000021dffffff]
[ 0.010299] Movable zone start for each node
[ 0.010300] Early memory node ranges
[ 0.010300] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.010302] node 0: [mem 0x0000000000100000-0x00000000d5db3fff]
[ 0.010302] node 0: [mem 0x00000000d5df7000-0x00000000db709fff]
[ 0.010303] node 0: [mem 0x00000000db800000-0x00000000dbf55fff]
[ 0.010304] node 0: [mem 0x00000000dc000000-0x00000000dc7b3fff]
[ 0.010304] node 0: [mem 0x00000000dc800000-0x00000000ddf1dfff]
[ 0.010305] node 0: [mem 0x00000000de000000-0x00000000df600fff]
[ 0.010306] node 0: [mem 0x0000000100000000-0x000000021dffffff]
[ 0.010336] Zeroed struct page in unavailable ranges: 3444 pages
[ 0.010337] Initmem setup node 0 [mem 0x0000000000001000-0x000000021dffffff]
[ 0.010338] On node 0 totalpages: 2085516
[ 0.010339] DMA zone: 64 pages used for memmap
[ 0.010339] DMA zone: 21 pages reserved
[ 0.010340] DMA zone: 3996 pages, LIFO batch:0
[ 0.010381] DMA32 zone: 14220 pages used for memmap
[ 0.010382] DMA32 zone: 910064 pages, LIFO batch:63
[ 0.019826] Normal zone: 18304 pages used for memmap
[ 0.019827] Normal zone: 1171456 pages, LIFO batch:63
[ 0.031347] ACPI: PM-Timer IO Port: 0x408
[ 0.031350] ACPI: Local APIC address 0xfee00000
[ 0.031356] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.031370] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.031371] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.031373] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.031374] ACPI: IRQ0 used by override.
[ 0.031374] ACPI: IRQ9 used by override.
[ 0.031376] Using ACPI (MADT) for SMP configuration information
[ 0.031377] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.031381] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.031396] [mem 0xdf800000-0xf7ffffff] available for PCI devices
[ 0.031399] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.120984] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
[ 0.121150] percpu: Embedded 51 pages/cpu s170968 r8192 d29736 u262144
[ 0.121154] pcpu-alloc: s170968 r8192 d29736 u262144 alloc=1*2097152
[ 0.121155] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.121171] Built 1 zonelists, mobility grouping on. Total pages: 2052907
[ 0.121171] Policy zone: Normal
[ 0.121173] Kernel command line: BOOT_IMAGE=/boot/bzImage-5.4.5.mx64.305 root=LABEL=root ro crashkernel=256M console=ttyS1,115200n8 console=tty0 init=/bin/systemd audit=0
[ 0.121263] audit: disabled (until reboot)
[ 0.121630] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.121818] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[ 0.121885] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.143340] Memory: 7834976K/8342064K available (14340K kernel code, 1518K rwdata, 3648K rodata, 1612K init, 1000K bss, 507088K reserved, 0K cma-reserved)
[ 0.143410] Kernel/User page tables isolation: enabled
[ 0.143423] ftrace: allocating 40508 entries in 159 pages
[ 0.154629] rcu: Hierarchical RCU implementation.
[ 0.154630] rcu: RCU event tracing is enabled.
[ 0.154631] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
[ 0.154633] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.154633] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.156949] NR_IRQS: 16640, nr_irqs: 488, preallocated irqs: 16
[ 0.157162] random: get_random_bytes called from start_kernel+0x310/0x4d3 with crng_init=0
[ 0.160262] Console: colour VGA+ 80x25
[ 0.174206] printk: console [tty0] enabled
[ 0.205503] printk: console [ttyS1] enabled
[ 0.205726] ACPI: Core revision 20190816
[ 0.206022] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.206415] APIC: Switch to symmetric I/O mode setup
[ 0.207034] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.211416] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x30e605dc2ae, max_idle_ns: 440795337456 ns
[ 0.211831] Calibrating delay loop (skipped), value calculated using timer frequency.. 6784.67 BogoMIPS (lpj=3392335)
[ 0.212247] pid_max: default: 32768 minimum: 301
[ 0.212880] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.213240] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.213768] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.213840] process: using mwait in idle threads
[ 0.214067] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.214312] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.214572] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.214832] Spectre V2 : Mitigation: Full generic retpoline
[ 0.215077] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.215438] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.215831] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.216197] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[ 0.216477] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.216831] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
[ 0.217232] Freeing SMP alternatives memory: 44K
[ 0.218026] TSC deadline timer enabled
[ 0.218029] smpboot: CPU0: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.218766] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.218833] ... version: 3
[ 0.219172] ... bit width: 48
[ 0.219513] ... generic registers: 4
[ 0.219831] ... value mask: 0000ffffffffffff
[ 0.220204] ... max period: 00007fffffffffff
[ 0.220573] ... fixed-purpose events: 3
[ 0.220831] ... event mask: 000000070000000f
[ 0.221234] rcu: Hierarchical SRCU implementation.
[ 0.222075] smp: Bringing up secondary CPUs ...
[ 0.222495] x86: Booting SMP configuration:
[ 0.222833] .... node #0, CPUs: #1 #2 #3 #4
[ 0.226853] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.
[ 0.227929] #5 #6 #7
[ 0.230851] smp: Brought up 1 node, 8 CPUs
[ 0.231488] smpboot: Max logical packages: 1
[ 0.231832] smpboot: Total of 8 processors activated (54277.36 BogoMIPS)
[ 0.233065] devtmpfs: initialized
[ 0.233294] PM: Registering ACPI NVS region [mem 0xd5db4000-0xd5df6fff] (274432 bytes)
[ 0.233837] PM: Registering ACPI NVS region [mem 0xddf1e000-0xddffffff] (925696 bytes)
[ 0.234512] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.234834] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[ 0.235298] xor: automatically using best checksumming function avx
[ 0.235795] NET: Registered protocol family 16
[ 0.235978] cpuidle: using governor menu
[ 0.236235] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.236830] ACPI: bus type PCI registered
[ 0.236830] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.237834] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.238251] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.238866] PCI: Using configuration type 1 for base access
[ 0.239306] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.239857] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.241857] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.258952] raid6: sse2x4 gen() 14843 MB/s
[ 0.275963] raid6: sse2x4 xor() 9994 MB/s
[ 0.292976] raid6: sse2x2 gen() 12402 MB/s
[ 0.309986] raid6: sse2x2 xor() 8419 MB/s
[ 0.326997] raid6: sse2x1 gen() 10421 MB/s
[ 0.344004] raid6: sse2x1 xor() 7505 MB/s
[ 0.344354] raid6: using algorithm sse2x4 gen() 14843 MB/s
[ 0.344731] raid6: .... xor() 9994 MB/s, rmw enabled
[ 0.345832] raid6: using ssse3x2 recovery algorithm
[ 0.346231] ACPI: Added _OSI(Module Device)
[ 0.346580] ACPI: Added _OSI(Processor Device)
[ 0.346835] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.347187] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.347565] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.347832] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.348203] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.353227] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.354310] ACPI: Dynamic OEM Table Load:
[ 0.354474] ACPI: SSDT 0xFFFF888214115000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.356160] ACPI: Dynamic OEM Table Load:
[ 0.356358] ACPI: SSDT 0xFFFF88821413D000 000303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.357156] ACPI: Dynamic OEM Table Load:
[ 0.357833] ACPI: SSDT 0xFFFF88821421BE00 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.359537] ACPI: Interpreter enabled
[ 0.359843] ACPI: (supports S0 S3 S5)
[ 0.364832] ACPI: Using IOAPIC for interrupt routing
[ 0.365223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.365983] ACPI: Enabled 15 GPEs in block 00 to 3F
[ 0.372569] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.372835] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.373676] acpi PNP0A08:00: _OSC: platform does not support [PME]
[ 0.374939] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability LTR]
[ 0.375349] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.376020] PCI host bridge to bus 0000:00
[ 0.376370] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.376776] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.376832] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.377443] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.377832] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.378440] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.379832] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.380443] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.380832] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.381437] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[ 0.381832] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.382218] pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
[ 0.382686] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.382861] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.383352] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.383759] pci 0000:00:14.0: reg 0x10: [mem 0xf7120000-0xf712ffff 64bit]
[ 0.384895] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.385358] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.385770] pci 0000:00:16.0: reg 0x10: [mem 0xf713c000-0xf713c00f 64bit]
[ 0.385902] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.386362] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[ 0.386766] pci 0000:00:19.0: reg 0x10: [mem 0xf7100000-0xf711ffff]
[ 0.386839] pci 0000:00:19.0: reg 0x14: [mem 0xf7139000-0xf7139fff]
[ 0.387241] pci 0000:00:19.0: reg 0x18: [io 0xf040-0xf05f]
[ 0.387670] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.387910] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.388319] pci 0000:00:1a.0: reg 0x10: [mem 0xf7138000-0xf71383ff]
[ 0.388789] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.389911] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.390316] pci 0000:00:1b.0: reg 0x10: [mem 0xf7130000-0xf7133fff 64bit]
[ 0.390794] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.390908] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.391315] pci 0000:00:1d.0: reg 0x10: [mem 0xf7137000-0xf71373ff]
[ 0.391788] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.391908] pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
[ 0.392416] pci 0000:00:1f.0: [8086:1e47] type 00 class 0x060100
[ 0.392977] pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
[ 0.393382] pci 0000:00:1f.2: reg 0x10: [io 0xf090-0xf097]
[ 0.393766] pci 0000:00:1f.2: reg 0x14: [io 0xf080-0xf083]
[ 0.394838] pci 0000:00:1f.2: reg 0x18: [io 0xf070-0xf077]
[ 0.395219] pci 0000:00:1f.2: reg 0x1c: [io 0xf060-0xf063]
[ 0.395604] pci 0000:00:1f.2: reg 0x20: [io 0xf020-0xf03f]
[ 0.395838] pci 0000:00:1f.2: reg 0x24: [mem 0xf7136000-0xf71367ff]
[ 0.396263] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.396702] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.396848] pci 0000:00:1f.3: reg 0x10: [mem 0xf7135000-0xf71350ff 64bit]
[ 0.397274] pci 0000:00:1f.3: reg 0x20: [io 0xf000-0xf01f]
[ 0.397752] pci 0000:01:00.0: [10de:0df8] type 00 class 0x030000
[ 0.398844] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.399250] pci 0000:01:00.0: reg 0x14: [mem 0xe8000000-0xefffffff 64bit pref]
[ 0.399838] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.400442] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.400828] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.400835] pci 0000:01:00.0: enabling Extended Tags
[ 0.401271] pci 0000:01:00.1: [10de:0bea] type 00 class 0x040300
[ 0.401675] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.401858] pci 0000:01:00.1: enabling Extended Tags
[ 0.402291] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.402659] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.402833] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.403241] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.403847] pci_bus 0000:02: extended config space not accessible
[ 0.404282] pci 0000:00:1e.0: PCI bridge to [bus 02] (subtractive decode)
[ 0.404698] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.405832] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.406459] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.406832] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.407476] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.408832] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.409482] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.409832] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff window] (subtractive decode)
[ 0.410482] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff window] (subtractive decode)
[ 0.410832] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff window] (subtractive decode)
[ 0.411850] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.412306] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.412761] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.412876] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[ 0.413328] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.413782] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.414872] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.415328] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.415870] iommu: Default domain type: Translated
[ 0.416243] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.416243] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.416833] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.417217] vgaarb: loaded
[ 0.417581] SCSI subsystem initialized
[ 0.418842] libata version 3.00 loaded.
[ 0.418854] ACPI: bus type USB registered
[ 0.419209] usbcore: registered new interface driver usbfs
[ 0.419595] usbcore: registered new interface driver hub
[ 0.419850] usbcore: registered new device driver usb
[ 0.420229] pps_core: LinuxPPS API ver. 1 registered
[ 0.420595] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 0.420833] PTP clock support registered
[ 0.421832] EDAC MC: Ver: 3.0.0
[ 0.421883] PCI: Using ACPI for IRQ routing
[ 0.423667] PCI: pci_cache_line_size set to 64 bytes
[ 0.423701] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.423702] e820: reserve RAM buffer [mem 0xd5db4000-0xd7ffffff]
[ 0.423702] e820: reserve RAM buffer [mem 0xdb70a000-0xdbffffff]
[ 0.423703] e820: reserve RAM buffer [mem 0xdbf56000-0xdbffffff]
[ 0.423704] e820: reserve RAM buffer [mem 0xdc7b4000-0xdfffffff]
[ 0.423704] e820: reserve RAM buffer [mem 0xddf1e000-0xdfffffff]
[ 0.423705] e820: reserve RAM buffer [mem 0xdf601000-0xdfffffff]
[ 0.423706] e820: reserve RAM buffer [mem 0x21e000000-0x21fffffff]
[ 0.423855] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.424249] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.426842] clocksource: Switched to clocksource tsc-early
[ 0.443148] VFS: Disk quotas dquot_6.6.0
[ 0.443505] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.443953] FS-Cache: Loaded
[ 0.444311] CacheFiles: Loaded
[ 0.444649] pnp: PnP ACPI init
[ 0.445046] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.445453] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.445513] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.445902] system 00:01: [io 0x1000-0x100f] has been reserved
[ 0.446293] system 00:01: [io 0xffff] has been reserved
[ 0.446666] system 00:01: [io 0xffff] has been reserved
[ 0.447042] system 00:01: [io 0x0400-0x0453] has been reserved
[ 0.447428] system 00:01: [io 0x0458-0x047f] has been reserved
[ 0.447815] system 00:01: [io 0x0500-0x057f] has been reserved
[ 0.448204] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.448597] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.448615] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.448649] system 00:03: [io 0x0454-0x0457] has been reserved
[ 0.449045] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.449119] system 00:04: [io 0x0a40-0x0a4f] has been reserved
[ 0.449509] system 00:04: [io 0x0a00-0x0a3f] has been reserved
[ 0.449902] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.449936] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.450330] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.450928] pnp 00:06: [dma 0 disabled]
[ 0.450957] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.451108] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.451517] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.451924] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.452331] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.452737] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.453145] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.453546] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.453953] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.454359] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.454764] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.455180] system 00:07: [mem 0xe0000000-0xe0000fff] has been reserved
[ 0.455588] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.455696] pnp: PnP ACPI: found 8 devices
[ 0.456879] thermal_sys: Registered thermal governor 'step_wise'
[ 0.456880] thermal_sys: Registered thermal governor 'user_space'
[ 0.461824] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.462866] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.463236] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.463626] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.464039] pci 0000:00:01.0: bridge window [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.464654] pci 0000:00:1e.0: PCI bridge to [bus 02]
[ 0.465030] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.465421] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.465816] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.466228] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.466639] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.471770] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.472180] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.472594] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.473006] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.473416] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.473823] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.474204] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.474598] pci_bus 0000:01: resource 2 [mem 0xe8000000-0xf1ffffff 64bit pref]
[ 0.475197] pci_bus 0000:02: resource 4 [io 0x0000-0x0cf7 window]
[ 0.475592] pci_bus 0000:02: resource 5 [io 0x0d00-0xffff window]
[ 0.475986] pci_bus 0000:02: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.476396] pci_bus 0000:02: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.476807] pci_bus 0000:02: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.477218] pci_bus 0000:02: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.477622] pci_bus 0000:02: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.478037] pci_bus 0000:02: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.478451] pci_bus 0000:02: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.478867] pci_bus 0000:02: resource 13 [mem 0xe0000000-0xfeafffff window]
[ 0.479356] NET: Registered protocol family 2
[ 0.479800] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear)
[ 0.480445] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[ 0.481128] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.481852] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.482277] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.482702] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear)
[ 0.502941] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x690 took 17635 usecs
[ 0.520935] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x690 took 16972 usecs
[ 0.521566] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.522208] pci 0000:01:00.1: D0 power state depends on 0000:01:00.0
[ 0.522610] PCI: CLS 64 bytes, default 64
[ 0.523002] Trying to unpack rootfs image as initramfs...
[ 0.585800] Freeing initrd memory: 5136K
[ 0.586148] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.586552] software IO TLB: mapped [mem 0xd770a000-0xdb70a000] (64MB)
[ 0.587068] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
[ 0.587685] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 0.588071] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 0.588947] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[ 0.589469] SGI XFS with ACLs, security attributes, realtime, no debug enabled
[ 0.590246] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.590885] io scheduler mq-deadline registered
[ 0.591238] io scheduler kyber registered
[ 0.591794] IPMI message handler: version 39.2
[ 0.592152] ipmi device interface
[ 0.592487] ipmi_si: IPMI System Interface driver
[ 0.592865] ipmi_si: Unable to find any System Interface(s)
[ 0.593250] IPMI Watchdog: driver initialized
[ 0.593599] IPMI poweroff: Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot
[ 0.594283] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.594941] ACPI: Power Button [PWRB]
[ 0.595297] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.595925] ACPI: Power Button [PWRF]
[ 0.596425] Monitor-Mwait will be used to enter C-1 state
[ 0.596430] Monitor-Mwait will be used to enter C-2 state
[ 0.596434] Monitor-Mwait will be used to enter C-3 state
[ 0.597639] ACPI: Invalid active0 threshold
[ 0.598058] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.598443] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.598969] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.599350] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.599738] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.620997] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.621860] lp: driver loaded but no devices found
[ 0.622333] Linux agpgart interface v0.103
[ 0.624340] brd: module loaded
[ 0.625800] loop: module loaded
[ 0.630094] drbd: initialized. Version: 8.4.11 (api:1/proto:86-101)
[ 0.630490] drbd: built-in
[ 0.630802] drbd: registered as block device major 147
[ 0.631231] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20190816/utaddress-213)
[ 0.632209] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.632887] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 0.633860] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.634532] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 0.635518] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.636192] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20190816/utaddress-213)
[ 0.637176] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 0.637843] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 0.638247] Uniform Multi-Platform E-IDE driver
[ 0.638824] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[ 0.639493] legacy IDE will be removed in 2021, please switch to libata
Report any missing HW support to linux-ide@xxxxxxxxxxxxxxx
[ 0.640245] Probing IDE interface ide0...
[ 1.162933] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 1.163295] legacy IDE will be removed in 2021, please switch to libata
Report any missing HW support to linux-ide@xxxxxxxxxxxxxxx
[ 1.164046] Probing IDE interface ide1...
[ 1.582878] tsc: Refined TSC clocksource calibration: 3392.282 MHz
[ 1.583293] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x30e5d3a863b, max_idle_ns: 440795241822 ns
[ 1.584006] clocksource: Switched to clocksource tsc
[ 1.678926] ide1 at 0x170-0x177,0x376 on irq 15
[ 1.679290] ide-gd driver 1.18
[ 1.679613] ide-cd driver 5.00
[ 1.680047] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 1.680679] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 1.681106] megasas: 07.710.50.00-rc1
[ 1.681456] mpt3sas version 31.100.00.00 loaded
[ 1.682250] ahci 0000:00:1f.2: version 3.0
[ 1.682413] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.683045] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.686259] scsi host0: ahci
[ 1.686661] scsi host1: ahci
[ 1.687045] scsi host2: ahci
[ 1.687428] scsi host3: ahci
[ 1.687950] scsi host4: ahci
[ 1.688388] scsi host5: ahci
[ 1.688737] ata1: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136100 irq 25
[ 1.689347] ata2: SATA max UDMA/133 abar m2048@0xf7136000 port 0xf7136180 irq 25
[ 1.689955] ata3: DUMMY
[ 1.690263] ata4: DUMMY
[ 1.690567] ata5: DUMMY
[ 1.690874] ata6: DUMMY
[ 1.691373] tun: Universal TUN/TAP device driver, 1.6
[ 1.691881] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.713.36-0 (2014/02/10)
[ 1.692619] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 1.693017] e100: Copyright(c) 1999-2006 Intel Corporation
[ 1.693404] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 1.693818] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 1.694209] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 1.694597] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 1.695110] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 1.801237] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[ 1.899317] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) b8:ca:3a:7c:61:d6
[ 1.899946] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 1.900396] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: 1011FF-0FF
[ 1.900822] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[ 1.901234] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 1.901624] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[ 1.902245] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 1.902649] sky2: driver version 1.30
[ 1.903054] Fusion MPT base driver 3.04.20
[ 1.903401] Copyright (c) 1999-2008 LSI Corporation
[ 1.903766] Fusion MPT SPI Host driver 3.04.20
[ 1.904128] Fusion MPT FC Host driver 3.04.20
[ 1.904486] Fusion MPT SAS Host driver 3.04.20
[ 1.904847] Fusion MPT misc device (ioctl) driver 3.04.20
[ 1.905355] mptctl: Registered with Fusion MPT base driver
[ 1.905733] mptctl: /dev/mptctl @ (major,minor=10,220)
[ 1.906113] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.906523] ehci-pci: EHCI PCI platform driver
[ 1.906978] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.907353] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.907971] ehci-pci 0000:00:1a.0: debug port 2
[ 1.912241] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.912660] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7138000
[ 1.919876] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.925175] hub 1-0:1.0: USB hub found
[ 1.925526] hub 1-0:1.0: 2 ports detected
[ 1.926067] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.926446] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.927068] ehci-pci 0000:00:1d.0: debug port 2
[ 1.931314] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.931732] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7137000
[ 1.938877] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.939461] hub 2-0:1.0: USB hub found
[ 1.939804] hub 2-0:1.0: 2 ports detected
[ 1.940257] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.940663] ohci-pci: OHCI PCI platform driver
[ 1.941024] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.941515] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.941893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.943556] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x000000000000b930
[ 1.944213] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.944857] hub 3-0:1.0: USB hub found
[ 1.945206] hub 3-0:1.0: 4 ports detected
[ 1.945847] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.946219] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.946828] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.947404] hub 4-0:1.0: USB hub found
[ 1.947754] hub 4-0:1.0: 4 ports detected
[ 1.948397] usbcore: registered new interface driver usb-storage
[ 1.948803] usbcore: registered new interface driver ftdi_sio
[ 1.949197] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.949821] usbcore: registered new interface driver omninet
[ 1.950210] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[ 1.950854] i8042: PNP: No PS/2 controller found.
[ 1.951215] i8042: Probing ports directly.
[ 1.954426] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.954798] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.955448] rtc_cmos 00:02: RTC can wake from S4
[ 1.955995] rtc_cmos 00:02: registered as rtc0
[ 1.956358] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.957107] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 1.958602] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 1.959004] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 1.959697] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 1.960097] iTCO_vendor_support: vendor-support=0
[ 1.960466] nv_tco: NV TCO WatchDog Timer Driver v0.01
[ 1.961039] intel_pstate: Intel P-state driver initializing
[ 1.961702] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.962195] usbcore: registered new interface driver usbhid
[ 1.962572] usbhid: USB HID core driver
[ 1.962920] drop_monitor: Initializing network drop monitor service
[ 1.963385] Key type dns_resolver registered
[ 1.964278] microcode: sig=0x306a9, pf=0x2, revision=0x20
[ 1.964774] microcode: Microcode Update Driver: v2.2.
[ 1.964776] IPI shorthand broadcast: enabled
[ 1.965502] sched_clock: Marking stable (1915455133, 49697310)->(1978507752, -13355309)
[ 1.966189] registered taskstats version 1
[ 1.966782] rtc_cmos 00:02: setting system clock to 2020-01-02T09:30:30 UTC (1577957430)
[ 1.996290] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.996709] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.998642] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 1.998643] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 1.999260] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.000142] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.000834] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.000853] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.001468] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.002384] ata1.00: ATA-8: ST500DM002-1BD142, KC47, max UDMA/133
[ 2.002792] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 32)
[ 2.003210] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.004272] ata2.00: ATAPI: PLDS DVD+/-RW DH-16AES, 3D11, max UDMA/100
[ 2.005449] ata1.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.005452] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.006082] ata1.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.006961] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.007647] ata2.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 2.007659] ata2.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 2.008277] ata2.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 2.009223] ata1.00: configured for UDMA/133
[ 2.009687] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 2.010933] scsi 0:0:0:0: Direct-Access ATA ST500DM002-1BD14 KC47 PQ: 0 ANSI: 5
[ 2.011829] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.012171] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.013030] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.013443] sd 0:0:0:0: [sda] Write Protect is off
[ 2.013804] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.013877] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.015342] ata2.00: configured for UDMA/100
[ 2.019015] scsi 1:0:0:0: CD-ROM PLDS DVD+-RW DH-16AES 3D11 PQ: 0 ANSI: 5
[ 2.023050] sda: sda1 sda2 sda3
[ 2.023727] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.064185] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.064815] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.065443] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.065542] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.066823] Freeing unused kernel image memory: 1612K
[ 2.067232] Write protecting the kernel read-only data: 20480k
[ 2.068016] Freeing unused kernel image memory: 2012K
[ 2.068551] Freeing unused kernel image memory: 448K
[ 2.068945] Run /init as init process
[ 2.248873] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.264861] usb 3-4: new low-speed USB device number 2 using xhci_hcd
[ 2.265340] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.277044] random: fast init done
[ 2.377660] hub 1-1:1.0: USB hub found
[ 2.378154] hub 1-1:1.0: 6 ports detected
[ 2.379580] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 2.380216] REISERFS (device sda1): using ordered data mode
[ 2.380589] reiserfs: using flush barriers
[ 2.385496] REISERFS (device sda1): journal params: device sda1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.386635] REISERFS (device sda1): checking transaction log (sda1)
[ 2.396542] hub 2-1:1.0: USB hub found
[ 2.396992] hub 2-1:1.0: 8 ports detected
[ 2.404708] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/0003:413C:2107.0001/input/input5
[ 2.447513] REISERFS (device sda1): Using r5 hash to sort names
[ 2.456944] hid-generic 0003:413C:2107.0001: input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-4/input0
[ 3.169614] random: crng init done
[ 3.715300] systemd[1]: Inserted module 'autofs4'
[ 4.131256] NET: Registered protocol family 10
[ 4.131812] Segment Routing with IPv6
[ 4.265676] NET: Registered protocol family 1
[ 4.266093] systemd[1]: Inserted module 'unix'
[ 4.409239] systemd[1]: systemd 242 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 4.421968] systemd[1]: Detected architecture x86-64.
[ 4.446248] systemd[1]: Set hostname to <sigchld.molgen.mpg.de>.
[ 5.954237] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.955714] systemd[1]: Created slice User and Session Slice.
[ 5.956914] systemd[1]: Created slice system-getty.slice.
[ 5.957915] systemd[1]: Listening on udev Control Socket.
[ 5.958900] systemd[1]: Listening on udev Kernel Socket.
[ 6.043493] systemd[1]: Condition check resulted in Journal Audit Socket being skipped.
[ 6.044256] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.943648] RPC: Registered named UNIX socket transport module.
[ 6.944051] RPC: Registered udp transport module.
[ 6.944405] RPC: Registered tcp transport module.
[ 6.944769] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.902710] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 7.912806] reiserfs: enabling write barrier flush mode
[ 8.245855] systemd-journald[171]: Received request to flush runtime journal from PID 1
[ 10.110732] wmi_bus wmi_bus-PNP0C14:00: WQBC data block query control method not found
[ 10.932990] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 11.263470] snd_hda_codec_realtek hdaudioC0D0: ALC269VB: SKU not ready 0x411111f0
[ 11.264388] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x1b/0x0/0x0/0x0/0x0) type:line
[ 11.265075] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 11.265693] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 11.266299] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 11.266692] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 11.267066] snd_hda_codec_realtek hdaudioC0D0: Rear Mic=0x19
[ 11.267458] snd_hda_codec_realtek hdaudioC0D0: Front Mic=0x18
[ 11.274615] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 11.275394] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 11.276112] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 11.276850] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 11.415098] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 11.415844] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 11.416601] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 11.417366] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input13
[ 13.114871] Adding 16777212k swap on /dev/sda3. Priority:-2 extents:1 across:16777212k
[ 13.578132] e1000e 0000:00:19.0 net00: renamed from eth0
[ 19.638719] 8021q: 802.1Q VLAN Support v1.8
[ 20.356609] e1000e: net00 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 24.255992] NFSD: Using UMH upcall client tracking operations.
[ 24.255996] NFSD: starting 90-second grace period (net f0000098)
[ 25.823124] REISERFS (device sda2): found reiserfs format "3.6" with standard journal
[ 25.823130] REISERFS (device sda2): using ordered data mode
[ 25.823131] reiserfs: using flush barriers
[ 25.942100] REISERFS (device sda2): journal params: device sda2, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 25.942268] REISERFS (device sda2): checking transaction log (sda2)
[ 26.188499] REISERFS (device sda2): Using r5 hash to sort names
[ 27.065429] nouveau 0000:01:00.0: NVIDIA GF108 (0c1c00a1)
[ 27.200017] nouveau 0000:01:00.0: bios: version 70.08.c1.00.02
[ 27.200545] nouveau 0000:01:00.0: fb: 1024 MiB DDR3
[ 27.870286] [TTM] Zone kernel: Available graphics memory: 3922114 KiB
[ 27.870287] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 27.870288] [TTM] Initializing pool allocator
[ 27.870291] [TTM] Initializing DMA pool allocator
[ 27.870303] nouveau 0000:01:00.0: DRM: VRAM: 1024 MiB
[ 27.870304] nouveau 0000:01:00.0: DRM: GART: 1048576 MiB
[ 27.870307] nouveau 0000:01:00.0: DRM: TMDS table version 2.0
[ 27.870308] nouveau 0000:01:00.0: DRM: DCB version 4.0
[ 27.870309] nouveau 0000:01:00.0: DRM: DCB outp 00: 02000300 00000000
[ 27.870310] nouveau 0000:01:00.0: DRM: DCB outp 01: 01000302 00020030
[ 27.870311] nouveau 0000:01:00.0: DRM: DCB outp 02: 028113a6 0f220010
[ 27.870311] nouveau 0000:01:00.0: DRM: DCB outp 03: 02011362 00020010
[ 27.870312] nouveau 0000:01:00.0: DRM: DCB conn 00: 00001030
[ 27.870313] nouveau 0000:01:00.0: DRM: DCB conn 01: 00010146
[ 27.871099] nouveau 0000:01:00.0: DRM: MM: using COPY0 for buffer copies
[ 27.871727] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 27.871727] [drm] Driver supports precise vblank timestamp query.
[ 27.961479] nouveau 0000:01:00.0: DRM: allocated 1920x1200 fb: 0x60000, bo 00000000a37c8dff
[ 27.961550] fbcon: nouveaudrmfb (fb0) is primary device
[ 28.141063] Console: switching to colour frame buffer device 240x75
[ 28.143889] nouveau 0000:01:00.0: fb0: nouveaudrmfb frame buffer device
[ 28.150081] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 0
[ 34.852106] FS-Cache: Netfs 'nfs' registered for caching
[ 35.163211] NFS: Registering the id_resolver key type
[ 35.163218] Key type id_resolver registered
[ 35.163219] Key type id_legacy registered
[ 3702.359734] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ 3702.438522] hub 1-1.2:1.0: USB hub found
[ 3702.438613] hub 1-1.2:1.0: 4 ports detected
[ 3702.723723] usb 1-1.2.2: new low-speed USB device number 4 using ehci-pci
[ 3702.820324] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2.2/1-1.2.2:1.0/0003:046D:C077.0002/input/input14
[ 3702.820520] hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1a.0-1.2.2/input0
[ 3822.268163] systemd-journald[171]: Failed to set ACL on /var/log/journal/95790226b8d0779f4b4797314ca986d4/user-5272.journal, ignoring: Operation not supported
[ 3914.529763] usb 1-1.2: USB disconnect, device number 3
[ 3914.529767] usb 1-1.2.2: USB disconnect, device number 4
[ 3914.531499] usb 1-1.2: clear tt 2 (0040) error -71
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature