[PATCH v2 06/19] iommu/mediatek: Add new flow to get SUB_COMMON ID in translation fault

[Chao Hao]

When the number of smi_larb is more than seven, smi_larb id
will be divided into COMMON_ID(high three bits, bit[11:9]) and
SUB_COMMON_ID(low two bits,bit[8:7]). So we can analyse translation
fault id by SUB_COMMON_ID and COMMON_ID. We can distinguish if
has SUB_COMMON_ID and SUB_COMMON_ID by has_sub_comm variable.

Signed-off-by: Chao Hao <chao.hao@xxxxxxxxxxxx>
---
 drivers/iommu/mtk_iommu.c | 16 ++++++++++++----
 drivers/iommu/mtk_iommu.h |  1 +
 2 files changed, 13 insertions(+), 4 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index b61785a87764..5de13ab1094e 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -89,6 +89,8 @@
 #define REG_MMU1_INVLD_PA			0x148
 #define REG_MMU0_INT_ID				0x150
 #define REG_MMU1_INT_ID				0x154
+#define F_MMU_INT_ID_COMM_ID(a)			(((a) >> 9) & 0x7)
+#define F_MMU_INT_ID_SUB_COMM_ID(a)		(((a) >> 7) & 0x3)
 #define F_MMU_INT_ID_LARB_ID(a)			(((a) >> 7) & 0x7)
 #define F_MMU_INT_ID_PORT_ID(a)			(((a) >> 2) & 0x1f)
 
@@ -227,7 +229,7 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	struct mtk_iommu_data *data = dev_id;
 	struct mtk_iommu_domain *dom = data->m4u_dom;
 	u32 int_state, regval, fault_iova, fault_pa;
-	unsigned int fault_larb, fault_port;
+	unsigned int fault_larb, fault_port, sub_comm = 0;
 	bool layer, write;
 
 	/* Read error info from registers */
@@ -243,8 +245,13 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 	}
 	layer = fault_iova & F_MMU_FAULT_VA_LAYER_BIT;
 	write = fault_iova & F_MMU_FAULT_VA_WRITE_BIT;
-	fault_larb = F_MMU_INT_ID_LARB_ID(regval);
 	fault_port = F_MMU_INT_ID_PORT_ID(regval);
+	if (data->plat_data->has_sub_comm[data->m4u_id]) {
+		fault_larb = F_MMU_INT_ID_COMM_ID(regval);
+		sub_comm = F_MMU_INT_ID_SUB_COMM_ID(regval);
+	} else {
+		fault_larb = F_MMU_INT_ID_LARB_ID(regval);
+	}
 
 	fault_larb = data->plat_data->larbid_remap[data->m4u_id][fault_larb];
 
@@ -252,8 +259,9 @@ static irqreturn_t mtk_iommu_isr(int irq, void *dev_id)
 			       write ? IOMMU_FAULT_WRITE : IOMMU_FAULT_READ)) {
 		dev_err_ratelimited(
 			data->dev,
-			"fault type=0x%x iova=0x%x pa=0x%x larb=%d port=%d layer=%d %s\n",
-			int_state, fault_iova, fault_pa, fault_larb, fault_port,
+			"fault type=0x%x iova=0x%x pa=0x%x larb=%d sub_comm=%d port=%d regval=0x%x layer=%d %s\n",
+			int_state, fault_iova, fault_pa, fault_larb,
+			sub_comm, fault_port, regval,
 			layer, write ? "write" : "read");
 	}
 
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index ec3011a50728..d4495230c6e7 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -40,6 +40,7 @@ struct mtk_iommu_plat_data {
 
 	/* HW will use the EMI clock if there isn't the "bclk". */
 	bool                has_bclk;
+	bool                has_sub_comm[2];
 	bool                has_vld_pa_rng;
 	bool                reset_axi;
 	u32                 m4u1_mask;
-- 
2.18.0