Re: [PATCH v2 2/3] ARM: dts: imx6qdl-icore-1.5: Remove duplicate phy reset methods

[Jacopo Mondi]

Hi Jagan,
   small detail, this should come -after= 3/3 in the series, am I
   wrong ?

On Mon, Dec 30, 2019 at 05:30:20PM +0530, Jagan Teki wrote:
> From: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
>
> Engicam i.CoreM6 1.5 Quad/Dual MIPI dtsi is reusing fec node
> from Engicam i.CoreM6 dtsi but have sampe copy of phy-reset-gpio
> and phy-mode properties.
>
> So, drop this phy reset methods from imx6qdl-icore-1.5 dsti file.
>
> Cc: Jacopo Mondi <jacopo@xxxxxxxxxx>
> Signed-off-by: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx>
> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx>

Anyway, I've tested on my iCore 1.5 Quad starter kit and things are
still working.

Pending acceptance of 3/3, which seem correct to me but I cannot
really judge knowing very few things about net:

Tested-by: Jacopo Mondi <jacopo@xxxxxxxxxx>

Thanks
   j

> ---
> Changes for v2:
> - new patch.
>
>  arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi | 2 --
>  1 file changed, 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
> index d91d46b5898f..0fd7f2e24d9c 100644
> --- a/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
> +++ b/arch/arm/boot/dts/imx6qdl-icore-1.5.dtsi
> @@ -25,10 +25,8 @@
>  &fec {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_enet>;
> -	phy-reset-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
>  	clocks = <&clks IMX6QDL_CLK_ENET>,
>  		 <&clks IMX6QDL_CLK_ENET>,
>  		 <&clks IMX6QDL_CLK_ENET_REF>;
> -	phy-mode = "rmii";
>  	status = "okay";
>  };
> --
> 2.18.0.321.gffc6fa0e3
>

Attachment: signature.asc
Description: PGP signature