[PATCH 1/2] crypto: caam - add support for i.MX8M Nano

[Horia GeantÄ]

Add support for the crypto engine used in i.mx8mn (i.MX 8M "Nano"),
which is very similar to the one used in i.mx8mq, i.mx8mm.

Since the clocks are identical for all members of i.MX 8M family,
simplify the SoC <--> clock array mapping table.

Signed-off-by: Horia GeantÄ <horia.geanta@xxxxxxx>
---
 drivers/crypto/caam/ctrl.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/crypto/caam/ctrl.c b/drivers/crypto/caam/ctrl.c
index 6659c8d9672e..88a58a8fc533 100644
--- a/drivers/crypto/caam/ctrl.c
+++ b/drivers/crypto/caam/ctrl.c
@@ -99,11 +99,12 @@ static inline int run_descriptor_deco0(struct device *ctrldev, u32 *desc,
 
 	if (ctrlpriv->virt_en == 1 ||
 	    /*
-	     * Apparently on i.MX8MQ it doesn't matter if virt_en == 1
+	     * Apparently on i.MX8MQ, 8MM, 8MN it doesn't matter if virt_en == 1
 	     * and the following steps should be performed regardless
 	     */
 	    of_machine_is_compatible("fsl,imx8mq") ||
-	    of_machine_is_compatible("fsl,imx8mm")) {
+	    of_machine_is_compatible("fsl,imx8mm") ||
+	    of_machine_is_compatible("fsl,imx8mn")) {
 		clrsetbits_32(&ctrl->deco_rsr, 0, DECORSR_JR0);
 
 		while (!(rd_reg32(&ctrl->deco_rsr) & DECORSR_VALID) &&
@@ -509,8 +510,7 @@ static const struct soc_device_attribute caam_imx_soc_table[] = {
 	{ .soc_id = "i.MX6UL", .data = &caam_imx6ul_data },
 	{ .soc_id = "i.MX6*",  .data = &caam_imx6_data },
 	{ .soc_id = "i.MX7*",  .data = &caam_imx7_data },
-	{ .soc_id = "i.MX8MQ", .data = &caam_imx7_data },
-	{ .soc_id = "i.MX8MM", .data = &caam_imx7_data },
+	{ .soc_id = "i.MX8M*", .data = &caam_imx7_data },
 	{ .family = "Freescale i.MX" },
 	{ /* sentinel */ }
 };
-- 
2.17.1