Re: [PATCH 2/2] dt-bindings: touchscreen: Convert Goodix touchscreen to json-schema

[Rob Herring]

On Tue, Jan 7, 2020 at 7:09 AM Benjamin Gaignard
<benjamin.gaignard@xxxxxx> wrote:
>
> Convert the Goodix binding to DT schema format using json-schema
>
> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxx>
> ---
>  .../bindings/input/touchscreen/goodix.txt          | 50 ----------------
>  .../bindings/input/touchscreen/goodix.yaml         | 69 ++++++++++++++++++++++
>  2 files changed, 69 insertions(+), 50 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix.txt
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> deleted file mode 100644
> index fc03ea4cf5ab..000000000000
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ /dev/null
> @@ -1,50 +0,0 @@
> -Device tree bindings for Goodix GT9xx series touchscreen controller
> -
> -Required properties:
> -
> - - compatible          : Should be "goodix,gt1151"
> -                                or "goodix,gt5663"
> -                                or "goodix,gt5688"
> -                                or "goodix,gt911"
> -                                or "goodix,gt9110"
> -                                or "goodix,gt912"
> -                                or "goodix,gt927"
> -                                or "goodix,gt9271"
> -                                or "goodix,gt928"
> -                                or "goodix,gt967"
> - - reg                 : I2C address of the chip. Should be 0x5d or 0x14
> - - interrupts          : Interrupt to which the chip is connected
> -
> -Optional properties:
> -
> - - irq-gpios           : GPIO pin used for IRQ. The driver uses the
> -                         interrupt gpio pin as output to reset the device.
> - - reset-gpios         : GPIO pin used for reset
> - - AVDD28-supply       : Analog power supply regulator on AVDD28 pin
> - - VDDIO-supply                : GPIO power supply regulator on VDDIO pin
> - - touchscreen-inverted-x
> - - touchscreen-inverted-y
> - - touchscreen-size-x
> - - touchscreen-size-y
> - - touchscreen-swapped-x-y
> -
> -The touchscreen-* properties are documented in touchscreen.txt in this
> -directory.
> -
> -Example:
> -
> -       i2c@00000000 {
> -               /* ... */
> -
> -               gt928@5d {
> -                       compatible = "goodix,gt928";
> -                       reg = <0x5d>;
> -                       interrupt-parent = <&gpio>;
> -                       interrupts = <0 0>;
> -
> -                       irq-gpios = <&gpio1 0 0>;
> -                       reset-gpios = <&gpio1 1 0>;
> -               };
> -
> -               /* ... */
> -       };
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
> new file mode 100644
> index 000000000000..05b52d359ac5
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/input/touchscreen/goodix.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Goodix GT9xx series touchscreen controller Bindings
> +
> +maintainers:
> +  - Dmitry Torokhov <dmitry.torokhov@xxxxxxxxx>
> +
> +allOf:
> +  - $ref: touchscreen.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - goodix,gt1151
> +      - goodix,gt5663
> +      - goodix,gt5688
> +      - goodix,gt911
> +      - goodix,gt9110
> +      - goodix,gt912
> +      - goodix,gt927
> +      - goodix,gt9271
> +      - goodix,gt928
> +      - goodix,gt967
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  irq-gpios:
> +    maxItems: 1
> +
> +  reset-gpios:
> +    maxItems: 1
> +
> +  AVDD28-supply:
> +    description: Analog power supply regulator on AVDD28 pin
> +
> +  VDDIO-supply:
> +    description: GPIO power supply regulator on VDDIO pin
> +
> +additionalProperties: false

This doesn't work if you have any touchscreen properties as this
doesn't account for things referenced. You need add them in this
schema:

touchscreen-inverted-x: true

This serves 2 purposes. It prevents additional properties not defined
here and defines which of the common properties are valid for this
device.

Rob