Re: [Linux-stm32] [PATCH v2] iio: adc: stm32-dfsdm: Use dma_request_chan() instead dma_request_slave_channel()

[Olivier MOYSAN]

Acked-by: Olivier Moysan <olivier.moysan@xxxxxx>

On 1/7/20 12:45 PM, Peter Ujfalusi wrote:
> dma_request_slave_channel() is a wrapper on top of dma_request_chan()
> eating up the error code.
>
> By using dma_request_chan() directly the driver can support deferred
> probing against DMA.
>
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
> ---
> Hi,
>
> Changes since v1:
> - Fall back to IRQ mode for ADC only in case of ENODEV
>
> Regards,
> Peter
>
>   drivers/iio/adc/stm32-dfsdm-adc.c | 21 +++++++++++++++++----
>   1 file changed, 17 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/iio/adc/stm32-dfsdm-adc.c b/drivers/iio/adc/stm32-dfsdm-adc.c
> index e493242c266e..74a2211bdff4 100644
> --- a/drivers/iio/adc/stm32-dfsdm-adc.c
> +++ b/drivers/iio/adc/stm32-dfsdm-adc.c
> @@ -1383,9 +1383,13 @@ static int stm32_dfsdm_dma_request(struct iio_dev *indio_dev)
>   {
>   	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
>   
> -	adc->dma_chan = dma_request_slave_channel(&indio_dev->dev, "rx");
> -	if (!adc->dma_chan)
> -		return -EINVAL;
> +	adc->dma_chan = dma_request_chan(&indio_dev->dev, "rx");
> +	if (IS_ERR(adc->dma_chan)) {
> +		int ret = PTR_ERR(adc->dma_chan);
> +
> +		adc->dma_chan = NULL;
> +		return ret;
> +	}
>   
>   	adc->rx_buf = dma_alloc_coherent(adc->dma_chan->device->dev,
>   					 DFSDM_DMA_BUFFER_SIZE,
> @@ -1509,7 +1513,16 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
>   	init_completion(&adc->completion);
>   
>   	/* Optionally request DMA */
> -	if (stm32_dfsdm_dma_request(indio_dev)) {
> +	ret = stm32_dfsdm_dma_request(indio_dev);
> +	if (ret) {
> +		if (ret != -ENODEV) {
> +			if (ret != -EPROBE_DEFER)
> +				dev_err(&indio_dev->dev,
> +					"DMA channel request failed with %d\n",
> +					ret);
> +			return ret;
> +		}
> +
>   		dev_dbg(&indio_dev->dev, "No DMA support\n");
>   		return 0;
>   	}