[PATCH 1/2] pinctrl: intel: Add GPIO <-> pin mapping ranges via callback

From: Linus Walleij
Date: Thu Jan 09 2020 - 02:55:41 EST


When IRQ chip is instantiated via GPIO library flow, the few functions,
in particular the ACPI event registration mechanism, on some of ACPI based
platforms expect that the pin ranges are initialized to that point.

Add GPIO <-> pin mapping ranges via callback in the GPIO library flow.

Cc: Hans de Goede <hdegoede@xxxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
---
Please apply this to the Intel pinctrl tree when you're pleased
with it!
---
drivers/pinctrl/intel/pinctrl-intel.c | 35 +++++++++++++++++----------
1 file changed, 22 insertions(+), 13 deletions(-)

diff --git a/drivers/pinctrl/intel/pinctrl-intel.c b/drivers/pinctrl/intel/pinctrl-intel.c
index 4860bc9a4e48..b479bcf1e246 100644
--- a/drivers/pinctrl/intel/pinctrl-intel.c
+++ b/drivers/pinctrl/intel/pinctrl-intel.c
@@ -1160,8 +1160,8 @@ static irqreturn_t intel_gpio_irq(int irq, void *data)
return ret;
}

-static int intel_gpio_add_pin_ranges(struct intel_pinctrl *pctrl,
- const struct intel_community *community)
+static int intel_gpio_add_community_ranges(struct intel_pinctrl *pctrl,
+ const struct intel_community *community)
{
int ret = 0, i;

@@ -1181,6 +1181,24 @@ static int intel_gpio_add_pin_ranges(struct intel_pinctrl *pctrl,
return ret;
}

+static int intel_gpio_add_pin_ranges(struct gpio_chip *gc)
+{
+ struct intel_pinctrl *pctrl = gpiochip_get_data(gc);
+ int ret, i;
+
+ for (i = 0; i < pctrl->ncommunities; i++) {
+ struct intel_community *community = &pctrl->communities[i];
+
+ ret = intel_gpio_add_community_ranges(pctrl, community);
+ if (ret) {
+ dev_err(pctrl->dev, "failed to add GPIO pin range\n");
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
static unsigned int intel_gpio_ngpio(const struct intel_pinctrl *pctrl)
{
const struct intel_community *community;
@@ -1205,7 +1223,7 @@ static unsigned int intel_gpio_ngpio(const struct intel_pinctrl *pctrl)

static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
{
- int ret, i;
+ int ret;

pctrl->chip = intel_gpio_chip;

@@ -1214,6 +1232,7 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
pctrl->chip.label = dev_name(pctrl->dev);
pctrl->chip.parent = pctrl->dev;
pctrl->chip.base = -1;
+ pctrl->chip.add_pin_ranges = intel_gpio_add_pin_ranges;
pctrl->irq = irq;

/* Setup IRQ chip */
@@ -1231,16 +1250,6 @@ static int intel_gpio_probe(struct intel_pinctrl *pctrl, int irq)
return ret;
}

- for (i = 0; i < pctrl->ncommunities; i++) {
- struct intel_community *community = &pctrl->communities[i];
-
- ret = intel_gpio_add_pin_ranges(pctrl, community);
- if (ret) {
- dev_err(pctrl->dev, "failed to add GPIO pin range\n");
- return ret;
- }
- }
-
/*
* We need to request the interrupt here (instead of providing chip
* to the irq directly) because on some platforms several GPIO
--
2.23.0