Re: BUG: KASAN: use-after-free in xhci_trb_virt_to_dma.part.24+0x1c/0x80

[Felipe Balbi]

Hi,

Mika Westerberg <mika.westerberg@xxxxxxxxxxxxxxx> writes:

> On Thu, Jan 02, 2020 at 03:10:14PM +0100, Paul Menzel wrote:
>> Mika, as you fixed the other leak, any idea, how to continue from the
>> kmemleak log below?
>> 
>> ```
>> unreferenced object 0xffff8c207a1e1408 (size 8):
>>   comm "systemd-udevd", pid 183, jiffies 4294667978 (age 752.292s)
>>   hex dump (first 8 bytes):
>>     34 01 05 00 00 00 00 00                          4.......
>>   backtrace:
>>     [<00000000aea7b46d>] xhci_mem_init+0xcfa/0xec0 [xhci_hcd]
>
> There are probably better ways for doing this but you can use objdump
> for example:
>
>   $ objdump -l --prefix-addresses -j .text --disassemble=xhci_mem_init drivers/usb/host/xhci-hcd.ko
>
> then find the offset xhci_mem_init+0xcfa. It should show you the line
> numbers as well if you have compiled your kernel with debug info. This
> should be close to the line that allocated the memory that was leaked.

addr2line helps here. So does gdb (gdb vmlinux l *(xhci_mem_init+0xcfa))

-- 
balbi

Attachment: signature.asc
Description: PGP signature