[PATCH v11 10/10] platform/x86: touchscreen_dmi: Add info for the Chuwi Vi8 Plus tablet

From: Hans de Goede
Date: Sat Jan 11 2020 - 09:57:56 EST


Add touchscreen info for the Chuwi Vi8 Plus tablet. This tablet uses a
Chipone ICN8505 touchscreen controller, with the firmware used by the
touchscreen embedded in the EFI firmware.

Acked-by: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
Acked-by: Ard Biesheuvel <ard.biesheuvel@xxxxxxxxxx>
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v7:
- Remove PROPERTY_ENTRY_BOOL("efi-embedded-firmware") properties entry,
as this is no longer necessary

Changes in v6:
- Switch from crc sums to SHA256 hashes for the firmware hash
---
drivers/platform/x86/touchscreen_dmi.c | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)

diff --git a/drivers/platform/x86/touchscreen_dmi.c b/drivers/platform/x86/touchscreen_dmi.c
index 4449e4c0b26b..4a09b479cda5 100644
--- a/drivers/platform/x86/touchscreen_dmi.c
+++ b/drivers/platform/x86/touchscreen_dmi.c
@@ -132,6 +132,18 @@ static const struct ts_dmi_data chuwi_vi8_data = {
.properties = chuwi_vi8_props,
};

+static const struct ts_dmi_data chuwi_vi8_plus_data = {
+ .embedded_fw = {
+ .name = "chipone/icn8505-HAMP0002.fw",
+ .prefix = { 0xb0, 0x07, 0x00, 0x00, 0xe4, 0x07, 0x00, 0x00 },
+ .length = 35012,
+ .sha256 = { 0x93, 0xe5, 0x49, 0xe0, 0xb6, 0xa2, 0xb4, 0xb3,
+ 0x88, 0x96, 0x34, 0x97, 0x5e, 0xa8, 0x13, 0x78,
+ 0x72, 0x98, 0xb8, 0x29, 0xeb, 0x5c, 0xa7, 0xf1,
+ 0x25, 0x13, 0x43, 0xf4, 0x30, 0x7c, 0xfc, 0x7c },
+ },
+};
+
static const struct property_entry chuwi_vi10_props[] = {
PROPERTY_ENTRY_U32("touchscreen-min-x", 0),
PROPERTY_ENTRY_U32("touchscreen-min-y", 4),
@@ -743,6 +755,15 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BIOS_VERSION, "CHUWI.D86JLBNR"),
},
},
+ {
+ /* Chuwi Vi8 Plus (CWI519) */
+ .driver_data = (void *)&chuwi_vi8_plus_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hampoo"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "D2D3_Vi8A1"),
+ DMI_MATCH(DMI_BOARD_NAME, "Cherry Trail CR"),
+ },
+ },
{
/* Chuwi Vi10 (CWI505) */
.driver_data = (void *)&chuwi_vi10_data,
@@ -1137,6 +1158,9 @@ static int __init ts_dmi_init(void)
return 0; /* Not an error */

ts_data = dmi_id->driver_data;
+ /* Some dmi table entries only provide an efi_embedded_fw_desc */
+ if (!ts_data->properties)
+ return 0;

error = bus_register_notifier(&i2c_bus_type, &ts_dmi_notifier);
if (error)
--
2.24.1