Re: [PATCH v28 06/12] LRNG - add SP800-90A DRBG extension

From: Stephan Mueller
Date: Thu Jan 16 2020 - 01:57:01 EST


Am Donnerstag, 16. Januar 2020, 01:14:35 CET schrieb Randy Dunlap:

Hi Randy,

> On 1/15/20 2:33 AM, Stephan Müller wrote:
> > CC: "Eric W. Biederman" <ebiederm@xxxxxxxxxxxx>
> > CC: "Alexander E. Patrakov" <patrakov@xxxxxxxxx>
> > CC: "Ahmed S. Darwish" <darwish.07@xxxxxxxxx>
> > CC: "Theodore Y. Ts'o" <tytso@xxxxxxx>
> > CC: Willy Tarreau <w@xxxxxx>
> > CC: Matthew Garrett <mjg59@xxxxxxxxxxxxx>
> > CC: Vito Caputo <vcaputo@xxxxxxxxxxx>
> > CC: Andreas Dilger <adilger.kernel@xxxxxxxxx>
> > CC: Jan Kara <jack@xxxxxxx>
> > CC: Ray Strode <rstrode@xxxxxxxxxx>
> > CC: William Jon McCann <mccann@xxxxxxx>
> > CC: zhangjs <zachary@xxxxxxxxxxxxxxxx>
> > CC: Andy Lutomirski <luto@xxxxxxxxxx>
> > CC: Florian Weimer <fweimer@xxxxxxxxxx>
> > CC: Lennart Poettering <mzxreary@xxxxxxxxxxx>
> > CC: Nicolai Stange <nstange@xxxxxxx>
> > Reviewed-by: Roman Drahtmueller <draht@xxxxxxxxxxxxxx>
> > Tested-by: Roman Drahtmüller <draht@xxxxxxxxxxxxxx>
> > Tested-by: Marcelo Henrique Cerri <marcelo.cerri@xxxxxxxxxxxxx>
> > Tested-by: Neil Horman <nhorman@xxxxxxxxxx>
> > Signed-off-by: Stephan Mueller <smueller@xxxxxxxxxx>
> > ---
> >
> > drivers/char/lrng/Kconfig | 11 ++
> > drivers/char/lrng/Makefile | 1 +
> > drivers/char/lrng/lrng_drbg.c | 260 ++++++++++++++++++++++++++++++++++
> > 3 files changed, 272 insertions(+)
> > create mode 100644 drivers/char/lrng/lrng_drbg.c
> >
> > diff --git a/drivers/char/lrng/Kconfig b/drivers/char/lrng/Kconfig
> > index cb701bb0b8b6..15fb623d9d1f 100644
> > --- a/drivers/char/lrng/Kconfig
> > +++ b/drivers/char/lrng/Kconfig
> > @@ -71,4 +71,15 @@ menuconfig LRNG_DRNG_SWITCH
> >
> > accessible via the external interfaces. With this configuration
> > option other DRNGs can be selected and loaded at runtime.
> >
> > +if LRNG_DRNG_SWITCH
> > +config LRNG_DRBG
> > + tristate "SP800-90A support for the LRNG"
> > + select CRYPTO_DRBG_MENU
> > + select CRYPTO_CMAC if CRYPTO_DRBG_CTR
>
> Don't select these if CRYPTO is not already set/enabled.
> It causes Kconfig warnings and possible build errors.

I added "depends on CRYPTO"
>
> > + help
> > + Enable the SP800-90A DRBG support for the LRNG. Once the
> > + module is loaded, output from /dev/random, /dev/urandom,
> > + getrandom(2), or get_random_bytes is provided by a DRBG.
> > +endif # LRNG_DRNG_SWITCH
> > +
> >
> > endif # LRNG
> >
> > diff --git a/drivers/char/lrng/lrng_drbg.c b/drivers/char/lrng/lrng_drbg.c
> > new file mode 100644
> > index 000000000000..8bf2badb1fe0
> > --- /dev/null
> > +++ b/drivers/char/lrng/lrng_drbg.c
> > @@ -0,0 +1,260 @@
> > +// SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
> > +/*
> > + * Backend for the LRNG providing the cryptographic primitives using the
> > + * kernel crypto API and its DRBG.
> > + *
> > + * Copyright (C) 2016 - 2020, Stephan Mueller <smueller@xxxxxxxxxx>
> > + */
> > +
> > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > +
> > +#include <crypto/drbg.h>
> > +#include <linux/init.h>
> > +#include <linux/module.h>
> > +#include <linux/lrng.h>
> > +
> > +/*
> > + * Define a DRBG plus a hash / MAC used to extract data from the entropy
> > pool. + * For LRNG_HASH_NAME you can use a hash or a MAC (HMAC or CMAC)
> > of your choice + * (Note, you should use the suggested selections below
> > -- using SHA-1 or MD5 + * is not wise). The idea is that the used cipher
> > primitive can be selected to + * be the same as used for the DRBG. I.e.
> > the LRNG only uses one cipher + * primitive using the same cipher
> > implementation with the options offered in + * the following. This means,
> > if the CTR DRBG is selected and AES-NI is present, + * both the CTR DRBG
> > and the selected cmac(aes) use AES-NI.
> > + *
> > + * The security strengths of the DRBGs are all 256 bits according to
> > + * SP800-57 section 5.6.1.
> > + *
> > + * This definition is allowed to be changed.
> > + */
> > +#ifdef CONFIG_CRYPTO_DRBG_CTR
> > +static unsigned int lrng_drbg_type = 0;
> > +#elif defined CONFIG_CRYPTO_DRBG_HMAC
> > +static unsigned int lrng_drbg_type = 1;
> > +#elif defined CONFIG_CRYPTO_DRBG_HASH
> > +static unsigned int lrng_drbg_type = 2;
> > +#else
> > +#error "Unknown DRBG in use"
> > +#endif
> > +
> > +/* The parameter must be r/o in sysfs as otherwise races appear. */
> > +module_param(lrng_drbg_type, uint, 0444);
> > +MODULE_PARM_DESC(lrng_drbg_type, "DRBG type used for LRNG (0->CTR_DRBG, "
> > + "1->HMAC_DRBG, 2->Hash_DRBG)");
>
> One line for the string, please, not split.

Changed

Thank you.

Ciao
Stephan