[PATCH] ARM: dts: at91: at91sam9n12: switch to new clock bindings
From: Alexandre Belloni
Date: Thu Jan 16 2020 - 12:36:23 EST
Switch at91sam9n12 boards to the new PMC clock bindings.
Signed-off-by: Alexandre Belloni <alexandre.belloni@xxxxxxxxxxx>
---
arch/arm/boot/dts/at91sam9n12.dtsi | 324 +++-------------------------
arch/arm/boot/dts/at91sam9n12ek.dts | 2 +-
2 files changed, 29 insertions(+), 297 deletions(-)
diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi
index 3a3e3e05fa13..5fa34914eca7 100644
--- a/arch/arm/boot/dts/at91sam9n12.dtsi
+++ b/arch/arm/boot/dts/at91sam9n12.dtsi
@@ -104,7 +104,7 @@ pmecc: ecc-engine@ffffe000 {
ramc0: ramc@ffffe800 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe800 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};
@@ -116,278 +116,10 @@ smc: smc@ffffea00 {
pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9n12-pmc", "syscon";
reg = <0xfffffc00 0x200>;
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_rc_osc: main_rc_osc {
- compatible = "atmel,at91sam9x5-clk-main-rc-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCRCS>;
- clock-frequency = <12000000>;
- clock-accuracy = <50000000>;
- };
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91sam9x5-clk-main";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCSELS>;
- clocks = <&main_rc_osc>, <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <745000000 800000000 0 0>,
- <695000000 750000000 1 0>,
- <645000000 700000000 2 0>,
- <595000000 650000000 3 0>,
- <545000000 600000000 0 1>,
- <495000000 555000000 1 1>,
- <445000000 500000000 2 1>,
- <400000000 450000000 3 1>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- pllb: pllbck {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKB>;
- clocks = <&main>;
- reg = <1>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <3>;
- atmel,pll-clk-output-ranges = <30000000 100000000 0>;
- };
-
- mck: masterck {
- compatible = "atmel,at91sam9x5-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>;
- atmel,clk-output-range = <0 133333333>;
- atmel,clk-divisors = <1 2 4 3>;
- atmel,master-clk-have-div3-pres;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9n12-clk-usb";
- #clock-cells = <0>;
- clocks = <&pllb>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9x5-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&pllb>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- lcdck: lcdck {
- #clock-cells = <0>;
- reg = <3>;
- clocks = <&mck>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- udpck: udpck {
- #clock-cells = <0>;
- reg = <7>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
- };
-
- periphck {
- compatible = "atmel,at91sam9x5-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioAB_clk: pioAB_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioCD_clk: pioCD_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- fuse_clk: fuse_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- twi0_clk: twi0_clk {
- reg = <9>;
- #clock-cells = <0>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- uart0_clk: uart0_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- uart1_clk: uart1_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- tcb_clk: tcb_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- lcdc_clk: lcdc_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
-
- sha_clk: sha_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- aes_clk: aes_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
- };
};
rstc@fffffe00 {
@@ -406,7 +138,7 @@ pit: timer@fffffe30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffe30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
clk32k: sckc@fffffe50 {
@@ -422,7 +154,7 @@ mmc0: mmc@f0008000 {
interrupts = <12 IRQ_TYPE_LEVEL_HIGH 0>;
dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>;
dma-names = "rxtx";
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
clock-names = "mci_clk";
#address-cells = <1>;
#size-cells = <0>;
@@ -435,7 +167,7 @@ tcb0: timer@f8008000 {
#size-cells = <0>;
reg = <0xf8008000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -445,7 +177,7 @@ tcb1: timer@f800c000 {
#size-cells = <0>;
reg = <0xf800c000 0x100>;
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>, <&clk32k>;
clock-names = "t0_clk", "slow_clk";
};
@@ -453,7 +185,7 @@ hlcdc: hlcdc@f8038000 {
compatible = "atmel,at91sam9n12-hlcdc";
reg = <0xf8038000 0x2000>;
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
clock-names = "periph_clk", "sys_clk", "slow_clk";
status = "disabled";
@@ -482,7 +214,7 @@ dma: dma-controller@ffffec00 {
reg = <0xffffec00 0x200>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
clock-names = "dma_clk";
};
@@ -800,7 +532,7 @@ pioA: gpio@fffff400 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff600 {
@@ -811,7 +543,7 @@ pioB: gpio@fffff600 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioAB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioC: gpio@fffff800 {
@@ -822,7 +554,7 @@ pioC: gpio@fffff800 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioD: gpio@fffffa00 {
@@ -833,7 +565,7 @@ pioD: gpio@fffffa00 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioCD_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
};
@@ -843,7 +575,7 @@ dbgu: serial@fffff200 {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -857,7 +589,7 @@ ssc0: ssc@f0010000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
clock-names = "pclk";
status = "disabled";
};
@@ -868,7 +600,7 @@ usart0: serial@f801c000 {
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
clock-names = "usart";
status = "disabled";
};
@@ -879,7 +611,7 @@ usart1: serial@f8020000 {
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
clock-names = "usart";
status = "disabled";
};
@@ -890,7 +622,7 @@ usart2: serial@f8024000 {
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -901,7 +633,7 @@ usart3: serial@f8028000 {
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
@@ -917,7 +649,7 @@ i2c0: i2c@f8010000 {
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
status = "disabled";
};
@@ -932,7 +664,7 @@ i2c1: i2c@f8014000 {
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
status = "disabled";
};
@@ -947,7 +679,7 @@ spi0: spi@f0000000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -963,7 +695,7 @@ spi1: spi@f0004000 {
dma-names = "tx", "rx";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -992,7 +724,7 @@ pwm0: pwm@f8034000 {
reg = <0xf8034000 0x300>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
status = "disabled";
};
@@ -1000,7 +732,7 @@ usb1: gadget@f803c000 {
compatible = "atmel,at91sam9260-udc";
reg = <0xf803c000 0x4000>;
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&udphs_clk>, <&udpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_SYSTEM 7>;
clock-names = "pclk", "hclk";
status = "disabled";
};
@@ -1010,7 +742,7 @@ usb0: ohci@500000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00500000 0x00100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1028,7 +760,7 @@ ebi: ebi@10000000 {
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
diff --git a/arch/arm/boot/dts/at91sam9n12ek.dts b/arch/arm/boot/dts/at91sam9n12ek.dts
index ea5cef0b0974..186c98160cab 100644
--- a/arch/arm/boot/dts/at91sam9n12ek.dts
+++ b/arch/arm/boot/dts/at91sam9n12ek.dts
@@ -59,7 +59,7 @@ i2c0: i2c@f8010000 {
wm8904: codec@1a {
compatible = "wlf,wm8904";
reg = <0x1a>;
- clocks = <&pck0>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 8>;
clock-names = "mclk";
};
--
2.24.1