Re: [RFT PATCH 0/4] hwmon: k10temp driver improvements

[Ken Moffat]

On Fri, 17 Jan 2020 at 14:14, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> On 1/16/20 8:47 PM, Ken Moffat wrote:
> > unfortunately I don't have any report of in0. I'm guessing I need some
> > module(s) which did not seem to do anything useful in the past.
> >
> > All I have in the 'in' area is
> > nct6779-isa-0290
> > Adapter: ISA adapter
> > Vcore:                  +0.30 V  (min =  +0.00 V, max =  +1.74 V)
> > in1:                    +0.00 V  (min =  +0.00 V, max =  +0.00 V)
> > AVCC:                   +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM
> > +3.3V:                  +3.39 V  (min =  +0.00 V, max =  +0.00 V)  ALARM

>
> Looks like someone configured /etc/sensors3.conf on that system which tells it
> to report in0 as Vcore. So there is a very clear mismatch. Can you report
> the values seen when the system is under load ?
>
> Thanks,
> Guenter

I do have sensors3.conf from lm_sensors-3.4.0. Here are the figures
 under load.

Vcore:                  +0.65 V  (min =  +0.00 V, max =  +1.74 V)

k10temp-pci-00c3
Adapter: PCI adapter
Vcore:        +1.27 V
Vsoc:         +0.89 V
Tdie:         +46.2ÂC  (high = +70.0ÂC)
Tctl:         +46.2ÂC
Icore:       +48.84 A
Isoc:        +10.10 A

Äen
-- 
Before the universe began, there was a sound. It went: "One, two, ONE,
two, three, four" [...] The cataclysmic power chord that followed was
the creation of time and space and matter and it does Not Fade Away.