Re: [PATCH v4 11/12] samples: add vfio-mdev-pci driver

From: Yan Zhao
Date: Tue Jan 21 2020 - 03:53:09 EST

Next message: Yash Shah: "RE: [PATCH v4 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed"
Previous message: Kevin Tang: "[PATCH RFC v2 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver"
In reply to: Tian, Kevin: "RE: [PATCH v4 11/12] samples: add vfio-mdev-pci driver"
Next in thread: Alex Williamson: "Re: [PATCH v4 11/12] samples: add vfio-mdev-pci driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Jan 21, 2020 at 03:43:02PM +0800, Tian, Kevin wrote:
> > From: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > Sent: Tuesday, January 21, 2020 5:08 AM
> >
> > On Sat, 18 Jan 2020 14:25:11 +0000
> > "Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
> >
> > > > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > > > Sent: Friday, January 17, 2020 5:24 AM
> > > > To: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > > Subject: Re: [PATCH v4 11/12] samples: add vfio-mdev-pci driver
> > > >
> > > > On Thu, 16 Jan 2020 12:33:06 +0000
> > > > "Liu, Yi L" <yi.l.liu@xxxxxxxxx> wrote:
> > > >
> > > > > > From: Alex Williamson [mailto:alex.williamson@xxxxxxxxxx]
> > > > > > Sent: Friday, January 10, 2020 6:49 AM
> > > > > > To: Liu, Yi L <yi.l.liu@xxxxxxxxx>
> > > > > > Subject: Re: [PATCH v4 11/12] samples: add vfio-mdev-pci driver
> > > > > >
> > > > > > On Tue, 7 Jan 2020 20:01:48 +0800
> > > > > > Liu Yi L <yi.l.liu@xxxxxxxxx> wrote:
> > > > > >
> > > > > > > This patch adds sample driver named vfio-mdev-pci. It is to wrap
> > > > > > > a PCI device as a mediated device. For a pci device, once bound
> > > > > > > to vfio-mdev-pci driver, user space access of this device will
> > > > > > > go through vfio mdev framework. The usage of the device follows
> > > > > > > mdev management method. e.g. user should create a mdev before
> > > > > > > exposing the device to user-space.
> > > > > > >
> > > > > > > Benefit of this new driver would be acting as a sample driver
> > > > > > > for recent changes from "vfio/mdev: IOMMU aware mediated
> > device"
> > > > > > > patchset. Also it could be a good experiment driver for future
> > > > > > > device specific mdev migration support. This sample driver only
> > > > > > > supports singleton iommu groups, for non-singleton iommu groups,
> > > > > > > this sample driver doesn't work. It will fail when trying to assign
> > > > > > > the non-singleton iommu group to VMs.
> > > > > > >
> > > > > > > To use this driver:
> > > > > > > a) build and load vfio-mdev-pci.ko module
> > > > > > > execute "make menuconfig" and config
> > CONFIG_SAMPLE_VFIO_MDEV_PCI
> > > > > > > then load it with following command:
> > > > > > > > sudo modprobe vfio
> > > > > > > > sudo modprobe vfio-pci
> > > > > > > > sudo insmod samples/vfio-mdev-pci/vfio-mdev-pci.ko
> > > > > > >
> > > > > > > b) unbind original device driver
> > > > > > > e.g. use following command to unbind its original driver
> > > > > > > > echo $dev_bdf > /sys/bus/pci/devices/$dev_bdf/driver/unbind
> > > > > > >
> > > > > > > c) bind vfio-mdev-pci driver to the physical device
> > > > > > > > echo $vend_id $dev_id > /sys/bus/pci/drivers/vfio-mdev-
> > pci/new_id
> > > > > > >
> > > > > > > d) check the supported mdev instances
> > > > > > > > ls /sys/bus/pci/devices/$dev_bdf/mdev_supported_types/
> > > > > > > vfio-mdev-pci-type_name
> > > > > > > > ls /sys/bus/pci/devices/$dev_bdf/mdev_supported_types/\
> > > > > > > vfio-mdev-pci-type_name/
> > > > > > > available_instances create device_api devices name
> > > > > > >
> > > > > > > e) create mdev on this physical device (only 1 instance)
> > > > > > > > echo "83b8f4f2-509f-382f-3c1e-e6bfe0fa1003" > \
> > > > > > > /sys/bus/pci/devices/$dev_bdf/mdev_supported_types/\
> > > > > > > vfio-mdev-pci-type_name/create
> > > > > > >
> > > > > > > f) passthru the mdev to guest
> > > > > > > add the following line in QEMU boot command
> > > > > > > -device vfio-pci,\
> > > > > > > sysfsdev=/sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-
> > e6bfe0fa1003
> > > > > > >
> > > > > > > g) destroy mdev
> > > > > > > > echo 1 > /sys/bus/mdev/devices/83b8f4f2-509f-382f-3c1e-
> > e6bfe0fa1003/\
> > > > > > > remove
> > > > > > >
> > > > > > > Cc: Kevin Tian <kevin.tian@xxxxxxxxx>
> > > > > > > Cc: Lu Baolu <baolu.lu@xxxxxxxxxxxxxxx>
> > > > > > > Cc: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx>
> > > > > > > Suggested-by: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > > > Signed-off-by: Liu Yi L <yi.l.liu@xxxxxxxxx>
> > > > > > > ---
> > > > > > > samples/Kconfig | 10 +
> > > > > > > samples/Makefile | 1 +
> > > > > > > samples/vfio-mdev-pci/Makefile | 4 +
> > > > > > > samples/vfio-mdev-pci/vfio_mdev_pci.c | 397
> > > > > > ++++++++++++++++++++++++++++++++++
> > > > > > > 4 files changed, 412 insertions(+)
> > > > > > > create mode 100644 samples/vfio-mdev-pci/Makefile
> > > > > > > create mode 100644 samples/vfio-mdev-pci/vfio_mdev_pci.c
> > > > > > >
> > > > > > > diff --git a/samples/Kconfig b/samples/Kconfig
> > > > > > > index 9d236c3..50d207c 100644
> > > > > > > --- a/samples/Kconfig
> > > > > > > +++ b/samples/Kconfig
> > > > > > > @@ -190,5 +190,15 @@ config SAMPLE_INTEL_MEI
> > > > > > > help
> > > > > > > Build a sample program to work with mei device.
> > > > > > >
> > > > > > > +config SAMPLE_VFIO_MDEV_PCI
> > > > > > > + tristate "Sample driver for wrapping PCI device as a mdev"
> > > > > > > + select VFIO_PCI_COMMON
> > > > > > > + select VFIO_PCI
> > > > > > > + depends on VFIO_MDEV && VFIO_MDEV_DEVICE
> > > > > > > + help
> > > > > > > + Sample driver for wrapping a PCI device as a mdev. Once
> > bound to
> > > > > > > + this driver, device passthru should through mdev path.
> > > > > > > +
> > > > > > > + If you don't know what to do here, say N.
> > > > > > >
> > > > > > > endif # SAMPLES
> > > > > > > diff --git a/samples/Makefile b/samples/Makefile
> > > > > > > index 5ce50ef..84faced 100644
> > > > > > > --- a/samples/Makefile
> > > > > > > +++ b/samples/Makefile
> > > > > > > @@ -21,5 +21,6 @@ obj-$(CONFIG_SAMPLE_FTRACE_DIRECT)
> > += ftrace/
> > > > > > > obj-$(CONFIG_SAMPLE_TRACE_ARRAY) += ftrace/
> > > > > > > obj-$(CONFIG_VIDEO_PCI_SKELETON) += v4l/
> > > > > > > obj-y += vfio-mdev/
> > > > > > > +obj-y += vfio-mdev-pci/
> > > > > >
> > > > > > I think we could just lump this into vfio-mdev rather than making
> > > > > > another directory.
> > > > >
> > > > > sure. will move it. :-)
> > > > >
> > > > > >
> > > > > > > subdir-$(CONFIG_SAMPLE_VFS) += vfs
> > > > > > > obj-$(CONFIG_SAMPLE_INTEL_MEI) += mei/
> > > > > > > diff --git a/samples/vfio-mdev-pci/Makefile b/samples/vfio-mdev-
> > pci/Makefile
> > > > > > > new file mode 100644
> > > > > > > index 0000000..41b2139
> > > > > > > --- /dev/null
> > > > > > > +++ b/samples/vfio-mdev-pci/Makefile
> > > > > > > @@ -0,0 +1,4 @@
> > > > > > > +# SPDX-License-Identifier: GPL-2.0-only
> > > > > > > +vfio-mdev-pci-y := vfio_mdev_pci.o
> > > > > > > +
> > > > > > > +obj-$(CONFIG_SAMPLE_VFIO_MDEV_PCI) += vfio-mdev-pci.o
> > > > > > > diff --git a/samples/vfio-mdev-pci/vfio_mdev_pci.c b/samples/vfio-
> > mdev-
> > > > > > pci/vfio_mdev_pci.c
> > > > > > > new file mode 100644
> > > > > > > index 0000000..b180356
> > > > > > > --- /dev/null
> > > > > > > +++ b/samples/vfio-mdev-pci/vfio_mdev_pci.c
> > > > > > > @@ -0,0 +1,397 @@
> > > > > > > +/*
> > > > > > > + * Copyright © 2020 Intel Corporation.
> > > > > > > + * Author: Liu Yi L <yi.l.liu@xxxxxxxxx>
> > > > > > > + *
> > > > > > > + * This program is free software; you can redistribute it and/or
> > modify
> > > > > > > + * it under the terms of the GNU General Public License version 2 as
> > > > > > > + * published by the Free Software Foundation.
> > > > > > > + *
> > > > > > > + * Derived from original vfio_pci.c:
> > > > > > > + * Copyright (C) 2012 Red Hat, Inc. All rights reserved.
> > > > > > > + * Author: Alex Williamson <alex.williamson@xxxxxxxxxx>
> > > > > > > + *
> > > > > > > + * Derived from original vfio:
> > > > > > > + * Copyright 2010 Cisco Systems, Inc. All rights reserved.
> > > > > > > + * Author: Tom Lyon, pugs@xxxxxxxxx
> > > > > > > + */
> > > > > > > +
> > > > > > > +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> > > > > > > +
> > > > > > > +#include <linux/device.h>
> > > > > > > +#include <linux/eventfd.h>
> > > > > > > +#include <linux/file.h>
> > > > > > > +#include <linux/interrupt.h>
> > > > > > > +#include <linux/iommu.h>
> > > > > > > +#include <linux/module.h>
> > > > > > > +#include <linux/mutex.h>
> > > > > > > +#include <linux/notifier.h>
> > > > > > > +#include <linux/pci.h>
> > > > > > > +#include <linux/pm_runtime.h>
> > > > > > > +#include <linux/slab.h>
> > > > > > > +#include <linux/types.h>
> > > > > > > +#include <linux/uaccess.h>
> > > > > > > +#include <linux/vfio.h>
> > > > > > > +#include <linux/vgaarb.h>
> > > > > > > +#include <linux/nospec.h>
> > > > > > > +#include <linux/mdev.h>
> > > > > > > +#include <linux/vfio_pci_common.h>
> > > > > > > +
> > > > > > > +#define DRIVER_VERSION "0.1"
> > > > > > > +#define DRIVER_AUTHOR "Liu Yi L <yi.l.liu@xxxxxxxxx>"
> > > > > > > +#define DRIVER_DESC "VFIO Mdev PCI - Sample driver for PCI
> > device as a
> > > > > > mdev"
> > > > > > > +
> > > > > > > +#define VFIO_MDEV_PCI_NAME "vfio-mdev-pci"
> > > > > > > +
> > > > > > > +static char ids[1024] __initdata;
> > > > > > > +module_param_string(ids, ids, sizeof(ids), 0);
> > > > > > > +MODULE_PARM_DESC(ids, "Initial PCI IDs to add to the vfio-mdev-
> > pci driver,
> > > > > > format is
> > \"vendor:device[:subvendor[:subdevice[:class[:class_mask]]]]\" and
> > > > > > multiple comma separated entries can be specified");
> > > > > > > +
> > > > > > > +static bool nointxmask;
> > > > > > > +module_param_named(nointxmask, nointxmask, bool, S_IRUGO |
> > S_IWUSR);
> > > > > > > +MODULE_PARM_DESC(nointxmask,
> > > > > > > + "Disable support for PCI 2.3 style INTx masking. If
> > this resolves
> > > > > > problems for specific devices, report lspci -vvvxxx to linux-
> > pci@xxxxxxxxxxxxxxx
> > > > so
> > > > > > the device can be fixed automatically via the broken_intx_masking
> > flag.");
> > > > > > > +
> > > > > > > +#ifdef CONFIG_VFIO_PCI_VGA
> > > > > > > +static bool disable_vga;
> > > > > > > +module_param(disable_vga, bool, S_IRUGO);
> > > > > > > +MODULE_PARM_DESC(disable_vga, "Disable VGA resource access
> > through
> > > > vfio-
> > > > > > mdev-pci");
> > > > > > > +#endif
> > > > > > > +
> > > > > > > +static bool disable_idle_d3;
> > > > > > > +module_param(disable_idle_d3, bool, S_IRUGO | S_IWUSR);
> > > > > > > +MODULE_PARM_DESC(disable_idle_d3,
> > > > > > > + "Disable using the PCI D3 low power state for idle,
> > unused devices");
> > > > > > > +
> > > > > > > +static struct pci_driver vfio_mdev_pci_driver;
> > > > > > > +
> > > > > > > +static ssize_t
> > > > > > > +name_show(struct kobject *kobj, struct device *dev, char *buf)
> > > > > > > +{
> > > > > > > + return sprintf(buf, "%s-type1\n", dev_name(dev));
> > > > > > > +}
> > > > > > > +
> > > > > > > +MDEV_TYPE_ATTR_RO(name);
> > > > > > > +
> > > > > > > +static ssize_t
> > > > > > > +available_instances_show(struct kobject *kobj, struct device *dev,
> > char *buf)
> > > > > > > +{
> > > > > > > + return sprintf(buf, "%d\n", 1);
> > > > > > > +}
> > > > > > > +
> > > > > > > +MDEV_TYPE_ATTR_RO(available_instances);
> > > > > > > +
> > > > > > > +static ssize_t device_api_show(struct kobject *kobj, struct device
> > *dev,
> > > > > > > + char *buf)
> > > > > > > +{
> > > > > > > + return sprintf(buf, "%s\n", VFIO_DEVICE_API_PCI_STRING);
> > > > > > > +}
> > > > > > > +
> > > > > > > +MDEV_TYPE_ATTR_RO(device_api);
> > > > > > > +
> > > > > > > +static struct attribute *vfio_mdev_pci_types_attrs[] = {
> > > > > > > + &mdev_type_attr_name.attr,
> > > > > > > + &mdev_type_attr_device_api.attr,
> > > > > > > + &mdev_type_attr_available_instances.attr,
> > > > > > > + NULL,
> > > > > > > +};
> > > > > > > +
> > > > > > > +static struct attribute_group vfio_mdev_pci_type_group1 = {
> > > > > > > + .name = "type1",
> > > > > > > + .attrs = vfio_mdev_pci_types_attrs,
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct attribute_group *vfio_mdev_pci_type_groups[] = {
> > > > > > > + &vfio_mdev_pci_type_group1,
> > > > > > > + NULL,
> > > > > > > +};
> > > > > > > +
> > > > > > > +struct vfio_mdev_pci {
> > > > > > > + struct vfio_pci_device *vdev;
> > > > > > > + struct mdev_device *mdev;
> > > > > > > + unsigned long handle;
> > > > > > > +};
> > > > > > > +
> > > > > > > +static int vfio_mdev_pci_create(struct kobject *kobj, struct
> > mdev_device
> > > > *mdev)
> > > > > > > +{
> > > > > > > + struct device *pdev;
> > > > > > > + struct vfio_pci_device *vdev;
> > > > > > > + struct vfio_mdev_pci *pmdev;
> > > > > > > + int ret;
> > > > > > > +
> > > > > > > + pdev = mdev_parent_dev(mdev);
> > > > > > > + vdev = dev_get_drvdata(pdev);
> > > > > > > + pmdev = kzalloc(sizeof(struct vfio_mdev_pci), GFP_KERNEL);
> > > > > > > + if (pmdev == NULL) {
> > > > > > > + ret = -EBUSY;
> > > > > > > + goto out;
> > > > > > > + }
> > > > > > > +
> > > > > > > + pmdev->mdev = mdev;
> > > > > > > + pmdev->vdev = vdev;
> > > > > > > + mdev_set_drvdata(mdev, pmdev);
> > > > > > > + ret = mdev_set_iommu_device(mdev_dev(mdev), pdev);
> > > > > > > + if (ret) {
> > > > > > > + pr_info("%s, failed to config iommu isolation for
> > mdev: %s on
> > > > > > pf: %s\n",
> > > > > > > + __func__, dev_name(mdev_dev(mdev)),
> > dev_name(pdev));
> > > > > > > + goto out;
> > > > > > > + }
> > > > > > > +
> > > > > > > + pr_info("%s, creation succeeded for mdev: %s\n", __func__,
> > > > > > > + dev_name(mdev_dev(mdev)));
> > > > > > > +out:
> > > > > > > + return ret;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int vfio_mdev_pci_remove(struct mdev_device *mdev)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > +
> > > > > > > + kfree(pmdev);
> > > > > > > + pr_info("%s, succeeded for mdev: %s\n", __func__,
> > > > > > > + dev_name(mdev_dev(mdev)));
> > > > > > > +
> > > > > > > + return 0;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int vfio_mdev_pci_open(struct mdev_device *mdev)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > + struct vfio_pci_device *vdev = pmdev->vdev;
> > > > > > > + int ret = 0;
> > > > > > > +
> > > > > > > + if (!try_module_get(THIS_MODULE))
> > > > > > > + return -ENODEV;
> > > > > > > +
> > > > > > > + vfio_pci_refresh_config(vdev, nointxmask, disable_idle_d3);
> > > > > > > +
> > > > > > > + mutex_lock(&vdev->reflck->lock);
> > > > > > > +
> > > > > > > + if (!vdev->refcnt) {
> > > > > > > + ret = vfio_pci_enable(vdev);
> > > > > > > + if (ret)
> > > > > > > + goto error;
> > > > > > > +
> > > > > > > + vfio_spapr_pci_eeh_open(vdev->pdev);
> > > > > > > + }
> > > > > > > + vdev->refcnt++;
> > > > > > > +error:
> > > > > > > + mutex_unlock(&vdev->reflck->lock);
> > > > > > > + if (!ret)
> > > > > > > + pr_info("Succeeded to open mdev: %s on pf: %s\n",
> > > > > > > + dev_name(mdev_dev(mdev)), dev_name(&pmdev-
> > >vdev->pdev-
> > > > > > >dev));
> > > > > > > + else {
> > > > > > > + pr_info("Failed to open mdev: %s on pf: %s\n",
> > > > > > > + dev_name(mdev_dev(mdev)), dev_name(&pmdev-
> > >vdev->pdev-
> > > > > > >dev));
> > > > > > > + module_put(THIS_MODULE);
> > > > > > > + }
> > > > > > > + return ret;
> > > > > > > +}
> > > > > > > +
> > > > > > > +static void vfio_mdev_pci_release(struct mdev_device *mdev)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > + struct vfio_pci_device *vdev = pmdev->vdev;
> > > > > > > +
> > > > > > > + pr_info("Release mdev: %s on pf: %s\n",
> > > > > > > + dev_name(mdev_dev(mdev)), dev_name(&pmdev-
> > >vdev->pdev-
> > > > > > >dev));
> > > > > > > +
> > > > > > > + mutex_lock(&vdev->reflck->lock);
> > > > > > > +
> > > > > > > + if (!(--vdev->refcnt)) {
> > > > > > > + vfio_spapr_pci_eeh_release(vdev->pdev);
> > > > > > > + vfio_pci_disable(vdev);
> > > > > > > + }
> > > > > > > +
> > > > > > > + mutex_unlock(&vdev->reflck->lock);
> > > > > > > +
> > > > > > > + module_put(THIS_MODULE);
> > > > > > > +}
> > > > > >
> > > > > > open() and release() here are almost identical between vfio_pci and
> > > > > > vfio_mdev_pci, which suggests maybe there should be common
> > functions to
> > > > > > call into like we do for the below.
> > > > >
> > > > > yes, let me have more study and do better abstract in next version. :-)
> > > > >
> > > > > > > +static long vfio_mdev_pci_ioctl(struct mdev_device *mdev,
> > unsigned int cmd,
> > > > > > > + unsigned long arg)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > +
> > > > > > > + return vfio_pci_ioctl(pmdev->vdev, cmd, arg);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static int vfio_mdev_pci_mmap(struct mdev_device *mdev,
> > > > > > > + struct vm_area_struct *vma)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > +
> > > > > > > + return vfio_pci_mmap(pmdev->vdev, vma);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static ssize_t vfio_mdev_pci_read(struct mdev_device *mdev, char
> > __user
> > > > *buf,
> > > > > > > + size_t count, loff_t *ppos)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > +
> > > > > > > + return vfio_pci_read(pmdev->vdev, buf, count, ppos);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static ssize_t vfio_mdev_pci_write(struct mdev_device *mdev,
> > > > > > > + const char __user *buf,
> > > > > > > + size_t count, loff_t *ppos)
> > > > > > > +{
> > > > > > > + struct vfio_mdev_pci *pmdev = mdev_get_drvdata(mdev);
> > > > > > > +
> > > > > > > + return vfio_pci_write(pmdev->vdev, (char __user *)buf,
> > count, ppos);
> > > > > > > +}
> > > > > > > +
> > > > > > > +static const struct mdev_parent_ops vfio_mdev_pci_ops = {
> > > > > > > + .supported_type_groups =
> > vfio_mdev_pci_type_groups,
> > > > > > > + .create = vfio_mdev_pci_create,
> > > > > > > + .remove = vfio_mdev_pci_remove,
> > > > > > > +
> > > > > > > + .open = vfio_mdev_pci_open,
> > > > > > > + .release = vfio_mdev_pci_release,
> > > > > > > +
> > > > > > > + .read = vfio_mdev_pci_read,
> > > > > > > + .write = vfio_mdev_pci_write,
> > > > > > > + .mmap = vfio_mdev_pci_mmap,
> > > > > > > + .ioctl = vfio_mdev_pci_ioctl,
> > > > > > > +};
> > > > > > > +
> > > > > > > +static int vfio_mdev_pci_driver_probe(struct pci_dev *pdev,
> > > > > > > + const struct pci_device_id *id)
> > > > > > > +{
> > > > > > > + struct vfio_pci_device *vdev;
> > > > > > > + int ret;
> > > > > > > +
> > > > > > > + if (pdev->hdr_type != PCI_HEADER_TYPE_NORMAL)
> > > > > > > + return -EINVAL;
> > > > > > > +
> > > > > > > + /*
> > > > > > > + * Prevent binding to PFs with VFs enabled, this too easily
> > allows
> > > > > > > + * userspace instance with VFs and PFs from the same device,
> > which
> > > > > > > + * cannot work. Disabling SR-IOV here would initiate
> > removing the
> > > > > > > + * VFs, which would unbind the driver, which is prone to
> > blocking
> > > > > > > + * if that VF is also in use by vfio-pci or vfio-mdev-pci. Just
> > > > > > > + * reject these PFs and let the user sort it out.
> > > > > > > + */
> > > > > > > + if (pci_num_vf(pdev)) {
> > > > > > > + pci_warn(pdev, "Cannot bind to PF with SR-IOV
> > enabled\n");
> > > > > > > + return -EBUSY;
> > > > > > > + }
> > > > > > > +
> > > > > > > + vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
> > > > > > > + if (!vdev)
> > > > > > > + return -ENOMEM;
> > > > > > > +
> > > > > > > + vdev->pdev = pdev;
> > > > > > > + vdev->irq_type = VFIO_PCI_NUM_IRQS;
> > > > > > > + mutex_init(&vdev->igate);
> > > > > > > + spin_lock_init(&vdev->irqlock);
> > > > > > > + mutex_init(&vdev->ioeventfds_lock);
> > > > > > > + INIT_LIST_HEAD(&vdev->ioeventfds_list);
> > > > > > > + vdev->nointxmask = nointxmask;
> > > > > > > +#ifdef CONFIG_VFIO_PCI_VGA
> > > > > > > + vdev->disable_vga = disable_vga;
> > > > > > > +#endif
> > > > > > > + vdev->disable_idle_d3 = disable_idle_d3;
> > > > > > > +
> > > > > > > + pci_set_drvdata(pdev, vdev);
> > > > > > > +
> > > > > > > + ret = vfio_pci_reflck_attach(vdev);
> > > > > > > + if (ret) {
> > > > > > > + pci_set_drvdata(pdev, NULL);
> > > > > > > + kfree(vdev);
> > > > > > > + return ret;
> > > > > > > + }
> > > > > > > +
> > > > > > > + if (vfio_pci_is_vga(pdev)) {
> > > > > > > + vga_client_register(pdev, vdev, NULL,
> > vfio_pci_set_vga_decode);
> > > > > > > + vga_set_legacy_decoding(pdev,
> > > > > > > +
> > vfio_pci_set_vga_decode(vdev, false));
> > > > > > > + }
> > > > > > > +
> > > > > > > + vfio_pci_probe_power_state(vdev);
> > > > > > > +
> > > > > > > + if (!vdev->disable_idle_d3) {
> > > > > > > + /*
> > > > > > > + * pci-core sets the device power state to an
> > unknown value at
> > > > > > > + * bootup and after being removed from a driver.
> > The only
> > > > > > > + * transition it allows from this unknown state is to
> > D0, which
> > > > > > > + * typically happens when a driver calls
> > pci_enable_device().
> > > > > > > + * We're not ready to enable the device yet, but we
> > do want to
> > > > > > > + * be able to get to D3. Therefore first do a D0
> > transition
> > > > > > > + * before going to D3.
> > > > > > > + */
> > > > > > > + vfio_pci_set_power_state(vdev, PCI_D0);
> > > > > > > + vfio_pci_set_power_state(vdev, PCI_D3hot);
> > > > > > > + }
> > > > > >
> > > > > > Ditto here and remove below, this seems like boilerplate that
> > shouldn't
> > > > > > be duplicated per leaf module. Thanks,
> > > > >
> > > > > Sure, the code snippet above may also be abstracted to be a common
> > API
> > > > > provided by vfio-pci-common.ko. :-)
> > > > >
> > > > > I have a confusion which may need confirm with you. Do you also want
> > the
> > > > > below code snippet be placed in the vfio-pci-common.ko and exposed
> > out
> > > > > as a wrapped API? Thus it can be used by sample driver and other
> > future
> > > > > drivers which want to wrap PCI device as a mdev. May be I
> > misundstood
> > > > > your comment. :-(
> > > >
> > > >
> > > > I think some sort of vfio_pci_common_{probe,remove}() would be a
> > > > reasonable starting point where the respective module _{probe,remove}
> > > > functions would call into these and add their module specific code
> > > > around it. That would at least give us a point to cleanup things that
> > > > are only used by the common code in the common code.
> > >
> > > sure, I can start from here if we are still going with this direction. :-)
> > >
> > > > I'm still struggling how we make this user consumable should we accept
> > > > this and progress beyond a proof of concept sample driver though. For
> > > > example, if a vendor actually implements an mdev wrapper driver or
> > even
> > > > just a device specific vfio-pci wrapper, to enable for example
> > > > migration support, how does a user know which driver to use for each
> > > > particular feature? The best I can come up with so far is something
> > > > like was done for vfio-platform reset modules. For instance a module
> > > > that extends features for a given device in vfio-pci might register an
> > > > ops structure and id table with vfio-pci, along with creating a module
> > > > alias (or aliases) for the devices it supports. When a device is
> > > > probed by vfio-pci it could try to match against registered id tables
> > > > to find a device specific ops structure, if one is not found it could
> > > > do a request_module using the PCI vendor and device IDs and some
> > unique
> > > > vfio-pci string, check again, and use the default ops if device
> > > > specific ops are still not present. That would solve the problem on
> > > > the vfio-pci side.
> > >
> > > yeah, this is letting vfio-pci to invoke the ops from vendor drivers/modules.
> > > I think this is what Yan is trying to do.
> >
> > I think I'm suggesting a callback ops structure a level above what Yan
> > previously proposed. For example, could we have device specific
> > vfio_device_ops where the vendor module can call out to common code
> > rather than requiring common code to test for and optionally call out
> > to device specific code.
> >
> > > > For mdevs, I tend to assume that this vfio-mdev-pci
> > > > meta driver is an anomaly only for the purpose of creating a generic
> > > > test device for IOMMU backed mdevs and that "real" mdev vendor
> > > > drivers will just be mdev enlightened host drivers, like i915 and
> > > > nvidia are now. Thanks,
> > >
> > > yes, this vfio-mdev-pci meta driver is just creating a test device.
> > > Do we still go with the current direction, or find any other way
> > > which may be easier for adding this meta driver?
> >
> > I think if the code split allows us to create an environment where
> > vendor drivers can re-use much of vfio-pci while creating a
> > vfio_device_ops that supports additional features for their device and
> > we bring that all together with a request module interface and module
> > aliases to make that work seamlessly, then it has value. A concern I
> > have in only doing this split in order to create the vfio-mdev-pci
> > module is that it leaves open the question and groundwork for forking
> > vfio-pci into multiple vendor specific modules that would become a mess
> > for user's to mange.
> >
> > > Compared with the "real" mdev vendor drivers, it is like a
> > > "vfio-pci + dummy mdev ops" driver. dummy mdev ops means
> > > no vendor specific handling and passthru to vfio-pci codes directly.
> > >
> > > I think this meta driver is even lighter than the "real" mdev vendor
> > > drivers. right? Is it possible to let this driver follow the way of
> > > registering ops structure and id table with vfio-pci? The obstacle
> > > I can see is the meta driver is a generic driver, which means it has
> > > no id table... For the "real" mdev vendor drivers, they naturally have
> > > such info. If vfio-mdev-pci can also get the id info without binding
> > > to a device, it may be possible. thoughts? :-)
> >
> > IDs could be provided via a module option or potentially with
> > build-time options. That might allow us to test all aspects of the
> > above proposal, ie. allowing sub-modules to provide vfio_device_ops for
> > specific devices, allowing those vendor vfio_device_ops to re-use much
> > of the existing vfio-pci code in that implementation, and a mechanism
> > for generically testing IOMMU backed mdevs. That's starting to sound a
> > lot more worthwhile than moving a bunch of code around only to
> > implement a sample driver for the latter. Thoughts? Thanks,
> >
>
> sounds a good idea. If feasible suppose Yan's mediate_ops series
> can be also largely avoided. The vendor driver can directly register its
> own vfio_device_ops and selectively introduces proprietary logic
> (e.g. for tracking dirty pages) on top of the generic vfio_pci code.

hi Alex
as our previously discussed, I'm preparing to implement my v2 as this
way:

1. on vfio-pci binding to a device, it will modprobe modules of alias
"vfio-pci-(vendorid)-(deviceid)", as a way to notify vendor drivers of
registering their vendor ops. (I renamed mediate_ops to vendor_ops in
v2)
2. in a module aliasing to "vfio-pci-(vendor_id)-(devivce_id)", in its
module_init, it will register a vendor ops to vfio-pci.
If there are two modules of the same alias and both registering vendor
ops at the same time, they are chained according to the prio in
its vendor ops.
3. vfio-pci would ask for region_infos for all vendor ops of a vdev in
vfio_pci_open, and init regions for vendor drivers. Current code in
vfio_pci_igd.c, vfio_pci_nvlink2.c, vfio_pci_nvlink2.c would all be
wrapped into separate modules. so current vfio_pci_register_dev_region()
would be removed accordingly. vfio_pci_rw would now be direct to
vendor_ops->region[i].rw. higher priority module's ops wins.
For example, module vfio_pci_igd may register to regions of index 10,
11, 12 for its opregion, and two cfg regions. still, vendor driver can
provide a module named i915_migration to register for regions of index 0
and 13 for BAR0 and migration.

Thanks
Yan

Next message: Yash Shah: "RE: [PATCH v4 0/6] GPIO & Hierarchy IRQ support for HiFive Unleashed"
Previous message: Kevin Tang: "[PATCH RFC v2 6/6] drm/sprd: add Unisoc's drm mipi dsi&dphy driver"
In reply to: Tian, Kevin: "RE: [PATCH v4 11/12] samples: add vfio-mdev-pci driver"
Next in thread: Alex Williamson: "Re: [PATCH v4 11/12] samples: add vfio-mdev-pci driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]