[Patch V4 06/19] phy: tegra: xusb: Add set_mode support for USB 2 phy on Tegra210

From: Nagarjuna Kristam
Date: Tue Feb 04 2020 - 06:19:20 EST


Add support for set_mode on USB 2 phy. This allow XUSB host/device mode
drivers to configure the hardware to corresponding modes.

Signed-off-by: Nagarjuna Kristam <nkristam@xxxxxxxxxx>
Acked-by: Thierry Reding <treding@xxxxxxxxxx>
---
V4:
- Added comment for conditional regulator disable.
- Added Acked-by info.
---
V2-V3:
- No changes in this version
---
drivers/phy/tegra/xusb-tegra210.c | 131 ++++++++++++++++++++++++++++++--------
1 file changed, 104 insertions(+), 27 deletions(-)

diff --git a/drivers/phy/tegra/xusb-tegra210.c b/drivers/phy/tegra/xusb-tegra210.c
index 394913b..54d6826 100644
--- a/drivers/phy/tegra/xusb-tegra210.c
+++ b/drivers/phy/tegra/xusb-tegra210.c
@@ -236,6 +236,7 @@
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT 18
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK 0xf
#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING 8
+#define XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED 0

struct tegra210_xusb_fuse_calibration {
u32 hs_curr_level[4];
@@ -935,6 +936,103 @@ static int tegra210_usb2_phy_exit(struct phy *phy)
return tegra210_xusb_padctl_disable(lane->pad->padctl);
}

+static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
+ bool status)
+{
+ u32 value;
+
+ dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
+
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
+
+ if (status) {
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+ value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
+ } else {
+ value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+ }
+
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
+
+ return 0;
+}
+
+static int tegra210_xusb_padctl_id_override(struct tegra_xusb_padctl *padctl,
+ bool status)
+{
+ u32 value;
+
+ dev_dbg(padctl->dev, "%s id override\n", status ? "set" : "clear");
+
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
+
+ if (status) {
+ if (value & XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON) {
+ value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
+ usleep_range(1000, 2000);
+
+ value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
+ }
+
+ value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_GROUNDED <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
+ } else {
+ value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
+ value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
+ XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
+ }
+
+ padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
+
+ return 0;
+}
+
+static int tegra210_usb2_phy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
+ struct tegra_xusb_padctl *padctl = lane->pad->padctl;
+ struct tegra_xusb_usb2_port *port = tegra_xusb_find_usb2_port(padctl,
+ lane->index);
+ int err = 0;
+
+ mutex_lock(&padctl->lock);
+
+ dev_dbg(&port->base.dev, "%s: mode %d", __func__, mode);
+
+ if (mode == PHY_MODE_USB_OTG) {
+ if (submode == USB_ROLE_HOST) {
+ tegra210_xusb_padctl_id_override(padctl, true);
+
+ err = regulator_enable(port->supply);
+ } else if (submode == USB_ROLE_DEVICE) {
+ tegra210_xusb_padctl_vbus_override(padctl, true);
+ } else if (submode == USB_ROLE_NONE) {
+ /*
+ * When port is peripheral only or role transitions to
+ * USB_ROLE_NONE from USB_ROLE_DEVICE, regulator is not
+ * be enabled.
+ */
+ if (regulator_is_enabled(port->supply))
+ regulator_disable(port->supply);
+
+ tegra210_xusb_padctl_id_override(padctl, false);
+ tegra210_xusb_padctl_vbus_override(padctl, false);
+ }
+ }
+
+ mutex_unlock(&padctl->lock);
+
+ return err;
+}
+
static int tegra210_usb2_phy_power_on(struct phy *phy)
{
struct tegra_xusb_lane *lane = phy_get_drvdata(phy);
@@ -1048,9 +1146,11 @@ static int tegra210_usb2_phy_power_on(struct phy *phy)
padctl_writel(padctl, value,
XUSB_PADCTL_USB2_BATTERY_CHRG_OTGPADX_CTL1(index));

- err = regulator_enable(port->supply);
- if (err)
- return err;
+ if (port->supply && port->mode == USB_DR_MODE_HOST) {
+ err = regulator_enable(port->supply);
+ if (err)
+ return err;
+ }

mutex_lock(&padctl->lock);

@@ -1164,6 +1264,7 @@ static const struct phy_ops tegra210_usb2_phy_ops = {
.exit = tegra210_usb2_phy_exit,
.power_on = tegra210_usb2_phy_power_on,
.power_off = tegra210_usb2_phy_power_off,
+ .set_mode = tegra210_usb2_phy_set_mode,
.owner = THIS_MODULE,
};

@@ -2023,30 +2124,6 @@ static const struct tegra_xusb_port_ops tegra210_usb3_port_ops = {
.map = tegra210_usb3_port_map,
};

-static int tegra210_xusb_padctl_vbus_override(struct tegra_xusb_padctl *padctl,
- bool status)
-{
- u32 value;
-
- dev_dbg(padctl->dev, "%s vbus override\n", status ? "set" : "clear");
-
- value = padctl_readl(padctl, XUSB_PADCTL_USB2_VBUS_ID);
-
- if (status) {
- value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
- value &= ~(XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_MASK <<
- XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT);
- value |= XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_FLOATING <<
- XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_SHIFT;
- } else {
- value &= ~XUSB_PADCTL_USB2_VBUS_ID_OVERRIDE_VBUS_ON;
- }
-
- padctl_writel(padctl, value, XUSB_PADCTL_USB2_VBUS_ID);
-
- return 0;
-}
-
static int tegra210_utmi_port_reset(struct phy *phy)
{
struct tegra_xusb_padctl *padctl;
--
2.7.4