Re: [PATCH V2 4/7] ARM: dts: imx6sx-sabreauto: Use new pin names with DCE/DTE for UART pins

[Uwe Kleine-König]

On Sat, Feb 15, 2020 at 01:15:55PM +0800, Anson Huang wrote:
> Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
> is to distinguish the DCE/DTE functions.
> 
> Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> ---
>  arch/arm/boot/dts/imx6sx-sabreauto.dts | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> index 315044c..8259244 100644
> --- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
> +++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
> @@ -229,8 +229,8 @@
>  
>  	pinctrl_uart1: uart1grp {
>  		fsl,pins = <
> -			MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1
> -			MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1
> +			MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX		0x1b0b1
> +			MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX		0x1b0b1

Reviewed-by: Uwe Kleine-König <u.kleine-koenig@xxxxxxxxxxxxxx>


-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | https://www.pengutronix.de/ |