Re: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver

From: Fabien Parent
Date: Tue Feb 18 2020 - 10:14:38 EST

Next message: Robin Murphy: "Re: [PATCH] bus: fsl-mc: Add ACPI support for fsl-mc"
Previous message: Peter Zijlstra: "Re: [PATCH v2 4/5] sched/pelt: Add a new runnable average signal"
Next in thread: Andy Shevchenko: "Re: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

On Tue, Jan 14, 2020 at 1:39 PM fengping.yu <fengping.yu@xxxxxxxxxxxx> wrote:
>
> Signed-off-by: fengping.yu <fengping.yu@xxxxxxxxxxxx>
>
> Add matrix keypad driver for MTK SoC.
>
> ---
> arch/arm64/configs/defconfig | 1 +
> drivers/input/keyboard/Kconfig | 8 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 280 +++++++++++++++++++++++++++++++
> 4 files changed, 290 insertions(+)
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
> index 8e05c39eab08..62bed77ec127 100644
> --- a/arch/arm64/configs/defconfig
> +++ b/arch/arm64/configs/defconfig
> @@ -315,6 +315,7 @@ CONFIG_KEYBOARD_ADC=m
> CONFIG_KEYBOARD_GPIO=y
> CONFIG_KEYBOARD_SNVS_PWRKEY=m
> CONFIG_KEYBOARD_CROS_EC=y
> +CONFIG_KEYBOARD_MTK=y
> CONFIG_INPUT_TOUCHSCREEN=y
> CONFIG_TOUCHSCREEN_ATMEL_MXT=m
> CONFIG_INPUT_MISC=y
> diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
> index 8911bc2ec42a..01747a97536b 100644
> --- a/drivers/input/keyboard/Kconfig
> +++ b/drivers/input/keyboard/Kconfig
> @@ -775,4 +775,12 @@ config KEYBOARD_MTK_PMIC
> To compile this driver as a module, choose M here: the
> module will be called pmic-keys.
>
> +config KEYBOARD_MTK
> + tristate "MediaTek Keypad Support"
> + help
> + Say Y here if you want to use the keypad.
> + If unuse, say N.
> + To compile this driver as a module, choose M here: the
> + module will be called mtk-kpd.
> +
> endif
> diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile
> index 9510325c0c5d..daa654bcce6e 100644
> --- a/drivers/input/keyboard/Makefile
> +++ b/drivers/input/keyboard/Makefile
> @@ -41,6 +41,7 @@ obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
> obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
> obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
> obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
> +obj-$(CONFIG_KEYBOARD_MTK) += mtk-kpd.o
> obj-$(CONFIG_KEYBOARD_MTK_PMIC) += mtk-pmic-keys.o
> obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
> obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
> diff --git a/drivers/input/keyboard/mtk-kpd.c b/drivers/input/keyboard/mtk-kpd.c
> new file mode 100644
> index 000000000000..e36461c9dd89
> --- /dev/null
> +++ b/drivers/input/keyboard/mtk-kpd.c
> @@ -0,0 +1,280 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 MediaTek Inc.
> + * Author Terry Chang <terry.chang@xxxxxxxxxxxx>
> + */
> +#include <linux/clk.h>
> +#include <linux/fs.h>
> +#include <linux/gpio.h>
> +#include <linux/init.h>
> +#include <linux/input/matrix_keypad.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_irq.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/platform_device.h>
> +#include <linux/regmap.h>
> +
> +#define KPD_NAME "mtk-kpd"
> +
> +#define KP_STA 0x0000
> +#define KP_MEM1 0x0004
> +#define KP_MEM2 0x0008
> +#define KP_MEM3 0x000c
> +#define KP_MEM4 0x0010
> +#define KP_MEM5 0x0014
> +#define KP_DEBOUNCE 0x0018
> +#define KP_SEL 0x0020
> +#define KP_EN 0x0024
> +
> +#define KP_COL0_SEL BIT(10)
> +#define KP_COL1_SEL BIT(11)
> +#define KP_COL2_SEL BIT(12)
> +
> +#define KPD_DEBOUNCE_MASK GENMASK_ULL(13, 0)
> +
> +#define KPD_NUM_MEMS 5
> +#define KPD_MEM5_BITS 8
> +#define KPD_NUM_KEYS 72 /* 4 * 16 + KPD_MEM5_BITS */
> +
> +struct mtk_keypad {
> + struct input_dev *input_dev;
> + struct clk *clk;
> + void __iomem *base;
> + unsigned int irqnr;
> + bool wakeup;
> + u32 key_debounce;
> + u32 n_rows;
> + u32 n_cols;
> + u32 keymap_state[KPD_NUM_MEMS];
> +};
> +
> +static void kpd_get_keymap_state(void __iomem *kp_base, u32 state[])
> +{
> + memset_io(state, 0xff, KPD_NUM_MEMS);
> + memcpy_fromio(state, kp_base, KPD_NUM_MEMS);
> +}
> +
> +static irqreturn_t kpd_irq_handler(int irq, void *dev_id)
> +{
> + /* use _nosync to avoid deadlock */
> + struct mtk_keypad *keypad = dev_id;
> + unsigned short *keycode = keypad->input_dev->keycode;
> + u32 new_state[KPD_NUM_MEMS], mask;
> + unsigned long change = 0;
> + int bit_nr;
> + int pressed;
> + u32 row_shift = get_count_order(keypad->n_cols);
> + unsigned short code;
> + int i;
> +
> + disable_irq_nosync(keypad->irqnr);
> +
> + kpd_get_keymap_state(keypad->base, new_state);

kpd_get_keymap_state(keypad->base + KP_MEM1, new_state);

> +
> + for (i = 0; i < KPD_NUM_MEMS; i++) {
> + change = new_state[i] ^ keypad->keymap_state[i];
> + if (!change)
> + continue;
> +
> + for_each_set_bit(bit_nr, &change, 32) {
> + mask = 1 << bit_nr;
> + pressed = (new_state[i] & mask) == 0U;
> + dev_dbg(&keypad->input_dev->dev,
> + "%s", pressed ? "pressed" : "released");
> +
> + code = keycode[MATRIX_SCAN_CODE(i, bit_nr, row_shift)];
> +
> + input_report_key(keypad->input_dev, code, pressed);
> + input_sync(keypad->input_dev);
> +
> + dev_dbg(&keypad->input_dev->dev,
> + "report Linux keycode = %d\n", code);
> + }
> + }
> +
> + memcpy(keypad->keymap_state, new_state, sizeof(new_state));
> +
> + enable_irq(keypad->irqnr);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int kpd_get_dts_info(struct mtk_keypad *keypad)
> +{
> + int ret;
> + struct device *dev = keypad->input_dev->dev.parent;
> + struct device_node *node = dev->of_node;
> +
> + ret = matrix_keypad_parse_properties(dev, &keypad->n_rows,
> + &keypad->n_cols);
> +
> + if (ret) {
> + dev_err(dev, "failed to parse keypad params.\n");
> + return ret;
> + }
> +
> + ret = of_property_read_u32(node, "mediatek,debounce-us",
> + &keypad->key_debounce);
> + if (ret) {
> + pr_debug("read mediatek,debounce-us error.\n");
> + return ret;
> + }
> +
> + keypad->wakeup = of_property_read_bool(node, "wakeup-source");
> +
> + dev_dbg(dev, "n_row=%d n_col=%d debounce=%d.\n",
> + keypad->n_rows, keypad->n_cols,
> + keypad->key_debounce);
> +
> + return 0;
> +}
> +
> +static int kpd_gpio_init(struct device *dev)
> +{
> + struct pinctrl *keypad_pinctrl;
> + struct pinctrl_state *kpd_default;
> +
> + keypad_pinctrl = devm_pinctrl_get(dev);
> + if (IS_ERR(keypad_pinctrl)) {
> + dev_err(dev, "Cannot find keypad_pinctrl!\n");
> +
> + return PTR_ERR(keypad_pinctrl);
> + }
> +
> + kpd_default = pinctrl_lookup_state(keypad_pinctrl, "default");
> + if (IS_ERR(kpd_default)) {
> + dev_err(dev, "Cannot find ecall_state!\n");
> +
> + return PTR_ERR(kpd_default);
> + }
> +
> + return pinctrl_select_state(keypad_pinctrl, kpd_default);
> +}
> +
> +static int kpd_pdrv_probe(struct platform_device *pdev)
> +{
> + struct mtk_keypad *keypad;
> + struct resource *res;
> + int err;
> +
> + if (!pdev->dev.of_node) {
> + dev_err(&pdev->dev, "No device tree data present.\n");
> + return -EINVAL;
> + }
> +
> + keypad = devm_kzalloc(&pdev->dev, sizeof(*keypad), GFP_KERNEL);
> + if (!keypad)
> + return -ENOMEM;
> +
> + memset(keypad->keymap_state, 0xff, sizeof(keypad->keymap_state));
> +
> + keypad->input_dev = devm_input_allocate_device(&pdev->dev);
> + if (!keypad->input_dev) {
> + dev_err(&pdev->dev, "input allocate device fail.\n");
> + return -ENOMEM;
> + }
> +
> + keypad->input_dev->name = KPD_NAME;
> + keypad->input_dev->id.bustype = BUS_HOST;
> + keypad->input_dev->dev.parent = &pdev->dev;
> +
> + err = kpd_get_dts_info(keypad);
> + if (err) {
> + dev_err(&pdev->dev, "get dts info failed.\n");
> + return err;
> + }
> +
> + err = matrix_keypad_build_keymap(NULL, NULL,
> + keypad->n_rows,
> + keypad->n_cols,
> + NULL,
> + keypad->input_dev);
> +
> + if (err) {
> + dev_err(&pdev->dev, "build keymap failed.\n");
> + return err;
> + }
> +
> + input_set_drvdata(keypad->input_dev, keypad);
> +
> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!res) {
> + dev_err(&pdev->dev, "get IO memory resource failed.\n");
> + return -ENODEV;
> + }
> +
> + keypad->base = devm_ioremap_resource(&pdev->dev, res);
> + if (IS_ERR(keypad->base)) {
> + dev_err(&pdev->dev, "KP iomap failed\n");
> + return PTR_ERR(keypad->base);
> + }
> +
> + writew((keypad->key_debounce * 32 / 1000 & KPD_DEBOUNCE_MASK),
> + keypad->base + KP_DEBOUNCE);
> +
> + keypad->clk = devm_clk_get(&pdev->dev, "kpd");
> + if (IS_ERR(keypad->clk)) {
> + dev_err(&pdev->dev, "get kpd-clk fail.\n");
> + return PTR_ERR(keypad->clk);
> + }
> +
> + err = clk_prepare_enable(keypad->clk);
> + if (err) {
> + dev_err(&pdev->dev, "kpd-clk prepare enable failed.\n");
> + return err;
> + }
> +
> + err = kpd_gpio_init(&pdev->dev);
> + if (err) {
> + dev_err(&pdev->dev, "gpio init failed\n");
> + return err;
> + }
> +
> + keypad->irqnr = platform_get_irq(pdev, 0);
> + if (!keypad->irqnr) {
> + dev_err(&pdev->dev, "KP get irqnr failed\n");
> + return -EINVAL;
> + }
> +
> + err = devm_request_irq(&pdev->dev, keypad->irqnr,
> + kpd_irq_handler, 0,
> + KPD_NAME, keypad);
> + if (err) {
> + dev_err(&pdev->dev, "register IRQ failed.\n");
> + return err;
> + }
> +
> + err = input_register_device(keypad->input_dev);
> + if (err) {
> + dev_err(&pdev->dev, "register input device failed.\n");
> + return err;
> + }
> +
> + device_init_wakeup(&pdev->dev, keypad->wakeup);
> +
> + platform_set_drvdata(pdev, keypad);
> +
> + return 0;
> +}
> +
> +static const struct of_device_id kpd_of_match[] = {
> + {.compatible = "mediatek,kp"},
> + {}
> +};
> +
> +static struct platform_driver kpd_pdrv = {
> + .probe = kpd_pdrv_probe,
> + .driver = {
> + .name = KPD_NAME,
> + .of_match_table = kpd_of_match,
> + },
> +};
> +
> +module_platform_driver(kpd_pdrv);
> +
> +MODULE_AUTHOR("Mediatek Corporation");
> +MODULE_DESCRIPTION("MTK Keypad (KPD) Driver");
> +MODULE_LICENSE("GPL");
> --
> 2.18.0
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Next message: Robin Murphy: "Re: [PATCH] bus: fsl-mc: Add ACPI support for fsl-mc"
Previous message: Peter Zijlstra: "Re: [PATCH v2 4/5] sched/pelt: Add a new runnable average signal"
Next in thread: Andy Shevchenko: "Re: [PATCH V3 2/2] drivers: input: keyboard: add mtk keypad driver"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]