[PATCH v2 1/3] dt: psci: Add arm,psci-sys-reset2-type property

[Elliot Berman]

Some implementors of PSCI may relax the requirements of the PSCI
architectural warm reset. In order to comply with PSCI specification, a
different reset_type value must be used. The alternate PSCI
SYSTEM_RESET2 may be used in all warm/soft reboot scenarios, replacing
the architectural warm reset.

Signed-off-by: Elliot Berman <eberman@xxxxxxxxxxxxxx>
---
 Documentation/devicetree/bindings/arm/psci.yaml | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/arm/psci.yaml b/Documentation/devicetree/bindings/arm/psci.yaml
index 8ef8542..469256a2 100644
--- a/Documentation/devicetree/bindings/arm/psci.yaml
+++ b/Documentation/devicetree/bindings/arm/psci.yaml
@@ -102,6 +102,11 @@ properties:
       [1] Kernel documentation - ARM idle states bindings
         Documentation/devicetree/bindings/arm/idle-states.txt
 
+  arm,psci-sys-reset2-param:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description: |
+        reset_param value to use during a warm or soft reboot.
+
   "#power-domain-cells":
     description:
       The number of cells in a PM domain specifier as per binding in [3].
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project