Re: [PATCH v4 0/5] Add clock drivers for SM8250 SoC

[Bryan O'Donoghue]

On 24/02/2020 04:49, Vinod Koul wrote:
> This series adds clock drivers support for SM8250 SoC.  As part of the
> device tree, the sm8250 dts file has basic nodes like CPU, PSCI, intc, timer
> and clock controller.
>
> Required clock controller driver and RPMH cloks are added to
> support peripherals like USB.
>
> All this configuration is added to support SM8250 to boot up to the
> serial console.
>
> Changes in v4:
>   - Make qcom,gcc-sm8250.yaml license as dual GPL + BSD
>
> Changes in v3:
> - Dropped accepted patches by Steve
> - Split the common rename patch to rename and refactor patches
> - Rebase on clk/clk-qcom and move yaml binding to .../bindings/clock/qcom,gcc-sm8250.yaml
> - Fix comments form Steve on gcc-sm8250 clk driver
>
> Taniya Das (5):
>    clk: qcom: clk-alpha-pll: Use common names for defines
>    clk: qcom: clk-alpha-pll: Refactor trion PLL
>    clk: qcom: clk-alpha-pll: Add support for controlling Lucid PLLs
>    dt-bindings: clock: Add SM8250 GCC clock bindings
>    clk: qcom: gcc: Add global clock controller driver for SM8250
>
>   .../bindings/clock/qcom,gcc-sm8250.yaml       |   72 +
>   drivers/clk/qcom/Kconfig                      |    7 +
>   drivers/clk/qcom/Makefile                     |    1 +
>   drivers/clk/qcom/clk-alpha-pll.c              |  264 +-
>   drivers/clk/qcom/clk-alpha-pll.h              |   12 +
>   drivers/clk/qcom/gcc-sm8250.c                 | 3690 +++++++++++++++++
>   include/dt-bindings/clock/qcom,gcc-sm8250.h   |  271 ++
>   7 files changed, 4268 insertions(+), 49 deletions(-)
>   create mode 100644 Documentation/devicetree/bindings/clock/qcom,gcc-sm8250.yaml
>   create mode 100644 drivers/clk/qcom/gcc-sm8250.c
>   create mode 100644 include/dt-bindings/clock/qcom,gcc-sm8250.h

Resend from the right email address.

For the series:

Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@xxxxxxxxxx>