[PATCH v2] arm64: dts: sc7180: Move venus node to the correct position

[Matthias Kaehlcke]

Per convention device nodes for SC7180 should be ordered by address.
This is currently not the case for the venus node, move it to the
correct position.

Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Excuses for sending v2 so shortly after v1, it seems ok in this case
since v1 is obviously wrong and the patch is not likely to be
controversial otherwise.

Changes in v2:
- insert the venus node *after* the usb@a6f8800 node, not before

 arch/arm64/boot/dts/qcom/sc7180.dtsi | 52 ++++++++++++++--------------
 1 file changed, 26 insertions(+), 26 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 253274d5f04c..5f97945e16a4 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1332,6 +1332,32 @@ system-cache-controller@9200000 {
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		venus: video-codec@aa00000 {
+			compatible = "qcom,sc7180-venus";
+			reg = <0 0x0aa00000 0 0xff000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>;
+			power-domain-names = "venus", "vcodec0";
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core", "iface", "bus",
+				      "vcodec0_core", "vcodec0_bus";
+			iommus = <&apps_smmu 0x0c00 0x60>;
+			memory-region = <&venus_mem>;
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1538,32 +1564,6 @@ dispcc: clock-controller@af00000 {
 			#power-domain-cells = <1>;
 		};
 
-		venus: video-codec@aa00000 {
-			compatible = "qcom,sc7180-venus";
-			reg = <0 0x0aa00000 0 0xff000>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
-			power-domains = <&videocc VENUS_GDSC>,
-					<&videocc VCODEC0_GDSC>;
-			power-domain-names = "venus", "vcodec0";
-			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
-				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
-				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
-				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
-			clock-names = "core", "iface", "bus",
-				      "vcodec0_core", "vcodec0_bus";
-			iommus = <&apps_smmu 0x0c00 0x60>;
-			memory-region = <&venus_mem>;
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-		};
-
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
-- 
2.25.1.481.gfbce0eb801-goog