Re: [PATCH] riscv: dts: Add GPIO reboot method to HiFive Unleashed DTS file

[Anup Patel]

On Wed, Feb 19, 2020 at 9:19 AM Yash Shah <yash.shah@xxxxxxxxxx> wrote:
>
> Add the ability to reboot the HiFive Unleashed board via GPIO.
>
> Signed-off-by: Yash Shah <yash.shah@xxxxxxxxxx>

LGTM.

Reviewed-by: Anup Patel <anup@xxxxxxxxxxxxxx>

Regards,
Anup

> ---
>  arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> index 609198c..4a2729f 100644
> --- a/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> +++ b/arch/riscv/boot/dts/sifive/hifive-unleashed-a00.dts
> @@ -2,6 +2,7 @@
>  /* Copyright (c) 2018-2019 SiFive, Inc */
>
>  #include "fu540-c000.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>
>  /* Clock frequency (in Hz) of the PCB crystal for rtcclk */
>  #define RTCCLK_FREQ            1000000
> @@ -41,6 +42,10 @@
>                 clock-frequency = <RTCCLK_FREQ>;
>                 clock-output-names = "rtcclk";
>         };
> +       gpio-restart {
> +               compatible = "gpio-restart";
> +               gpios = <&gpio 10 GPIO_ACTIVE_LOW>;
> +       };
>  };
>
>  &uart0 {
> --
> 2.7.4
>