Re: [PATCH v6 5/7] phy: amlogic: Add Amlogic AXG MIPI/PCIE analog PHY Driver

From: Neil Armstrong
Date: Wed Mar 04 2020 - 04:09:02 EST


Hi Lorenzo,


On 03/03/2020 18:19, Lorenzo Pieralisi wrote:
> On Fri, Jan 24, 2020 at 12:29:41AM +0100, Remi Pommarel wrote:
>> This adds support for the MIPI analog PHY which is also used for PCIE
>> found in the Amlogic AXG SoC Family.
>>
>> MIPI or PCIE selection is done by the #phy-cells, making the mode
>> static and exclusive.
>>
>> For now only PCIE fonctionality is supported.
>>
>> This PHY will be used to replace the mipi_enable clock gating logic
>> which was mistakenly added in the clock subsystem. This also activate
>> a non documented band gap bit in those registers that allows reliable
>> PCIE clock signal generation on AXG platforms.
>>
>> Signed-off-by: Remi Pommarel <repk@xxxxxxxxxxxx>
>> ---
>> drivers/phy/amlogic/Kconfig | 11 +
>> drivers/phy/amlogic/Makefile | 11 +-
>> .../amlogic/phy-meson-axg-mipi-pcie-analog.c | 188 ++++++++++++++++++
>> 3 files changed, 205 insertions(+), 5 deletions(-)
>> create mode 100644 drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>
> Kishon, Neil,
>
> can you please review/ack this patch and patch 6 ?

Sure, it was already acked by jerome, but it's also ok for me:

Reviewed-by: Neil Armstrong <narmstrong@xxxxxxxxxxxx>

Neil
>
> I would like to queue the series shortly, thanks.
>
> Lorenzo
>
>> diff --git a/drivers/phy/amlogic/Kconfig b/drivers/phy/amlogic/Kconfig
>> index af774ac2b934..8c9cf2403591 100644
>> --- a/drivers/phy/amlogic/Kconfig
>> +++ b/drivers/phy/amlogic/Kconfig
>> @@ -59,3 +59,14 @@ config PHY_MESON_G12A_USB3_PCIE
>> Enable this to support the Meson USB3 + PCIE Combo PHY found
>> in Meson G12A SoCs.
>> If unsure, say N.
>> +
>> +config PHY_MESON_AXG_MIPI_PCIE_ANALOG
>> + tristate "Meson AXG MIPI + PCIE analog PHY driver"
>> + default ARCH_MESON
>> + depends on OF && (ARCH_MESON || COMPILE_TEST)
>> + select GENERIC_PHY
>> + select REGMAP_MMIO
>> + help
>> + Enable this to support the Meson MIPI + PCIE analog PHY
>> + found in Meson AXG SoCs.
>> + If unsure, say N.
>> diff --git a/drivers/phy/amlogic/Makefile b/drivers/phy/amlogic/Makefile
>> index 11d1c42ac2be..0aecf92d796a 100644
>> --- a/drivers/phy/amlogic/Makefile
>> +++ b/drivers/phy/amlogic/Makefile
>> @@ -1,6 +1,7 @@
>> # SPDX-License-Identifier: GPL-2.0-only
>> -obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
>> -obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
>> -obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
>> -obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
>> -obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o
>> +obj-$(CONFIG_PHY_MESON8B_USB2) += phy-meson8b-usb2.o
>> +obj-$(CONFIG_PHY_MESON_GXL_USB2) += phy-meson-gxl-usb2.o
>> +obj-$(CONFIG_PHY_MESON_G12A_USB2) += phy-meson-g12a-usb2.o
>> +obj-$(CONFIG_PHY_MESON_GXL_USB3) += phy-meson-gxl-usb3.o
>> +obj-$(CONFIG_PHY_MESON_G12A_USB3_PCIE) += phy-meson-g12a-usb3-pcie.o
>> +obj-$(CONFIG_PHY_MESON_AXG_MIPI_PCIE_ANALOG) += phy-meson-axg-mipi-pcie-analog.o
>> diff --git a/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> new file mode 100644
>> index 000000000000..1431cbf885e1
>> --- /dev/null
>> +++ b/drivers/phy/amlogic/phy-meson-axg-mipi-pcie-analog.c
>> @@ -0,0 +1,188 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Amlogic AXG MIPI + PCIE analog PHY driver
>> + *
>> + * Copyright (C) 2019 Remi Pommarel <repk@xxxxxxxxxxxx>
>> + */
>> +#include <linux/module.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/platform_device.h>
>> +#include <dt-bindings/phy/phy.h>
>> +
>> +#define HHI_MIPI_CNTL0 0x00
>> +#define HHI_MIPI_CNTL0_COMMON_BLOCK GENMASK(31, 28)
>> +#define HHI_MIPI_CNTL0_ENABLE BIT(29)
>> +#define HHI_MIPI_CNTL0_BANDGAP BIT(26)
>> +#define HHI_MIPI_CNTL0_DECODE_TO_RTERM GENMASK(15, 12)
>> +#define HHI_MIPI_CNTL0_OUTPUT_EN BIT(3)
>> +
>> +#define HHI_MIPI_CNTL1 0x01
>> +#define HHI_MIPI_CNTL1_CH0_CML_PDR_EN BIT(12)
>> +#define HHI_MIPI_CNTL1_LP_ABILITY GENMASK(5, 4)
>> +#define HHI_MIPI_CNTL1_LP_RESISTER BIT(3)
>> +#define HHI_MIPI_CNTL1_INPUT_SETTING BIT(2)
>> +#define HHI_MIPI_CNTL1_INPUT_SEL BIT(1)
>> +#define HHI_MIPI_CNTL1_PRBS7_EN BIT(0)
>> +
>> +#define HHI_MIPI_CNTL2 0x02
>> +#define HHI_MIPI_CNTL2_CH_PU GENMASK(31, 25)
>> +#define HHI_MIPI_CNTL2_CH_CTL GENMASK(24, 19)
>> +#define HHI_MIPI_CNTL2_CH0_DIGDR_EN BIT(18)
>> +#define HHI_MIPI_CNTL2_CH_DIGDR_EN BIT(17)
>> +#define HHI_MIPI_CNTL2_LPULPS_EN BIT(16)
>> +#define HHI_MIPI_CNTL2_CH_EN(n) BIT(15 - (n))
>> +#define HHI_MIPI_CNTL2_CH0_LP_CTL GENMASK(10, 1)
>> +
>> +struct phy_axg_mipi_pcie_analog_priv {
>> + struct phy *phy;
>> + unsigned int mode;
>> + struct regmap *regmap;
>> +};
>> +
>> +static const struct regmap_config phy_axg_mipi_pcie_analog_regmap_conf = {
>> + .reg_bits = 8,
>> + .val_bits = 32,
>> + .reg_stride = 4,
>> + .max_register = HHI_MIPI_CNTL2,
>> +};
>> +
>> +static int phy_axg_mipi_pcie_analog_power_on(struct phy *phy)
>> +{
>> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> +
>> + /* MIPI not supported yet */
>> + if (priv->mode != PHY_TYPE_PCIE)
>> + return -EINVAL;
>> +
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_BANDGAP, HHI_MIPI_CNTL0_BANDGAP);
>> +
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_ENABLE, HHI_MIPI_CNTL0_ENABLE);
>> + return 0;
>> +}
>> +
>> +static int phy_axg_mipi_pcie_analog_power_off(struct phy *phy)
>> +{
>> + struct phy_axg_mipi_pcie_analog_priv *priv = phy_get_drvdata(phy);
>> +
>> + /* MIPI not supported yet */
>> + if (priv->mode != PHY_TYPE_PCIE)
>> + return -EINVAL;
>> +
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_BANDGAP, 0);
>> + regmap_update_bits(priv->regmap, HHI_MIPI_CNTL0,
>> + HHI_MIPI_CNTL0_ENABLE, 0);
>> + return 0;
>> +}
>> +
>> +static int phy_axg_mipi_pcie_analog_init(struct phy *phy)
>> +{
>> + return 0;
>> +}
>> +
>> +static int phy_axg_mipi_pcie_analog_exit(struct phy *phy)
>> +{
>> + return 0;
>> +}
>> +
>> +static const struct phy_ops phy_axg_mipi_pcie_analog_ops = {
>> + .init = phy_axg_mipi_pcie_analog_init,
>> + .exit = phy_axg_mipi_pcie_analog_exit,
>> + .power_on = phy_axg_mipi_pcie_analog_power_on,
>> + .power_off = phy_axg_mipi_pcie_analog_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static struct phy *phy_axg_mipi_pcie_analog_xlate(struct device *dev,
>> + struct of_phandle_args *args)
>> +{
>> + struct phy_axg_mipi_pcie_analog_priv *priv = dev_get_drvdata(dev);
>> + unsigned int mode;
>> +
>> + if (args->args_count != 1) {
>> + dev_err(dev, "invalid number of arguments\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + mode = args->args[0];
>> +
>> + /* MIPI mode is not supported yet */
>> + if (mode != PHY_TYPE_PCIE) {
>> + dev_err(dev, "invalid phy mode select argument\n");
>> + return ERR_PTR(-EINVAL);
>> + }
>> +
>> + priv->mode = mode;
>> + return priv->phy;
>> +}
>> +
>> +static int phy_axg_mipi_pcie_analog_probe(struct platform_device *pdev)
>> +{
>> + struct phy_provider *phy;
>> + struct device *dev = &pdev->dev;
>> + struct phy_axg_mipi_pcie_analog_priv *priv;
>> + struct device_node *np = dev->of_node;
>> + struct regmap *map;
>> + struct resource *res;
>> + void __iomem *base;
>> + int ret;
>> +
>> + priv = devm_kmalloc(dev, sizeof(*priv), GFP_KERNEL);
>> + if (!priv)
>> + return -ENOMEM;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + base = devm_ioremap_resource(dev, res);
>> + if (IS_ERR(base)) {
>> + dev_err(dev, "failed to get regmap base\n");
>> + return PTR_ERR(base);
>> + }
>> +
>> + map = devm_regmap_init_mmio(dev, base,
>> + &phy_axg_mipi_pcie_analog_regmap_conf);
>> + if (IS_ERR(map)) {
>> + dev_err(dev, "failed to get HHI regmap\n");
>> + return PTR_ERR(map);
>> + }
>> + priv->regmap = map;
>> +
>> + priv->phy = devm_phy_create(dev, np, &phy_axg_mipi_pcie_analog_ops);
>> + if (IS_ERR(priv->phy)) {
>> + ret = PTR_ERR(priv->phy);
>> + if (ret != -EPROBE_DEFER)
>> + dev_err(dev, "failed to create PHY\n");
>> + return ret;
>> + }
>> +
>> + phy_set_drvdata(priv->phy, priv);
>> + dev_set_drvdata(dev, priv);
>> +
>> + phy = devm_of_phy_provider_register(dev,
>> + phy_axg_mipi_pcie_analog_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy);
>> +}
>> +
>> +static const struct of_device_id phy_axg_mipi_pcie_analog_of_match[] = {
>> + {
>> + .compatible = "amlogic,axg-mipi-pcie-analog-phy",
>> + },
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, phy_axg_mipi_pcie_analog_of_match);
>> +
>> +static struct platform_driver phy_axg_mipi_pcie_analog_driver = {
>> + .probe = phy_axg_mipi_pcie_analog_probe,
>> + .driver = {
>> + .name = "phy-axg-mipi-pcie-analog",
>> + .of_match_table = phy_axg_mipi_pcie_analog_of_match,
>> + },
>> +};
>> +module_platform_driver(phy_axg_mipi_pcie_analog_driver);
>> +
>> +MODULE_AUTHOR("Remi Pommarel <repk@xxxxxxxxxxxx>");
>> +MODULE_DESCRIPTION("Amlogic AXG MIPI + PCIE analog PHY driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.24.1
>>