Re: [PATCH v3 4/5] dt-bindings: input: Add docs for ADC driven joystick.

[Rob Herring]

On Sun, Mar 01, 2020 at 04:09:19PM +0100, Artur Rojek wrote:
> Add documentation for the adc-joystick driver, used to provide support
> for joysticks connected over ADC.
> 
> Signed-off-by: Artur Rojek <contact@xxxxxxxxxxxxxx>
> Tested-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx>
> ---
> 
>  Changes:
> 
>  v2: - Add `reg` property to axis subnode in order to enumerate the axes,
>      - rename `linux,abs-code` property to `linux,code`,
>      - drop `linux,` prefix from the remaining properties of axis subnode
> 
>  v3: no change
> 
>  .../bindings/input/adc-joystick.yaml          | 117 ++++++++++++++++++
>  1 file changed, 117 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/adc-joystick.yaml
> 
> diff --git a/Documentation/devicetree/bindings/input/adc-joystick.yaml b/Documentation/devicetree/bindings/input/adc-joystick.yaml
> new file mode 100644
> index 000000000000..91fc87dcbddb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/adc-joystick.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019-2020 Artur Rojek
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/bindings/input/adc-joystick.yaml#";

Drop 'bindings'.

> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: ADC attached joystick
> +
> +maintainers:
> +  - Artur Rojek <contact@xxxxxxxxxxxxxx>
> +
> +description: |
> +  Bindings for joystick devices connected to ADC controllers supporting
> +  the Industrial I/O subsystem.
> +
> +properties:
> +  compatible:
> +    const: adc-joystick
> +
> +  io-channels:
> +    description: |
> +      List of phandle and IIO specifier pairs.
> +      Each pair defines one ADC channel to which a joystick axis is connected.
> +      See Documentation/devicetree/bindings/iio/iio-bindings.txt for details.

How many?

> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +required:
> +  - compatible
> +  - io-channels
> +  - '#address-cells'
> +  - '#size-cells'
> +
> +additionalProperties: false
> +
> +patternProperties:
> +  "^axis@([0-9])$":

Up to 10 axis?

> +    type: object
> +    description: |
> +      Represents a joystick axis bound to the given ADC channel.
> +      For each entry in the io-channels list, one axis subnode with a matching
> +      reg property must be specified.
> +
> +    properties:
> +      reg:
> +        items:
> +          description: Index of an io-channels list entry bound to this axis.

reg:
  enum: [ 0, 1 ]

Or use minimum/maximum

> +
> +      linux,code:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: EV_ABS specific event code generated by the axis.
> +
> +      abs-range:
> +        $ref: /schemas/types.yaml#/definitions/uint32-array

Needs to be under an 'allOf'.

> +        items:
> +          - description: minimum value
> +          - description: maximum value
> +        description: |
> +          Minimum and maximum values produced by the axis.
> +          For an ABS_X axis this will be the left-most and right-most
> +          inclination of the joystick. If min > max, it is left to userspace to
> +          treat the axis as inverted.
> +          This property is interpreted as two signed 32 bit values.
> +
> +      abs-fuzz:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          Amount of noise in the input value.
> +          Omitting this property indicates the axis is precise.
> +
> +      abs-flat:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +          Axial "deadzone", or area around the center position, where the axis
> +          is considered to be at rest.
> +          Omitting this property indicates the axis always returns to exactly
> +          the center position.
> +
> +    required:
> +      - reg
> +      - linux,code
> +      - abs-range
> +
> +    additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/iio/adc/ingenic,adc.h>
> +    #include <dt-bindings/input/input.h>
> +
> +    joystick: adc-joystick {
> +      compatible = "adc-joystick";
> +      io-channels = <&adc INGENIC_ADC_TOUCH_XP>,
> +                    <&adc INGENIC_ADC_TOUCH_YP>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +
> +      axis@0 {
> +              reg = <0>;
> +              linux,code = <ABS_X>;
> +              abs-range = <3300 0>;
> +              abs-fuzz = <4>;
> +              abs-flat = <200>;
> +      };
> +      axis@1 {
> +              reg = <1>;
> +              linux,code = <ABS_Y>;
> +              abs-range = <0 3300>;
> +              abs-fuzz = <4>;
> +              abs-flat = <200>;
> +      };
> +    };
> -- 
> 2.25.1
>