Re: [PATCH v2 1/2] net: phy: tja11xx: add TJA1102 support

From: Oleksij Rempel
Date: Wed Mar 11 2020 - 09:12:28 EST


On Mon, Mar 09, 2020 at 08:45:50PM +0100, Heiner Kallweit wrote:
> On 09.03.2020 08:40, Oleksij Rempel wrote:
> > TJA1102 is an dual T1 PHY chip. Both PHYs are separately addressable.
> > PHY 0 can be identified by PHY ID. PHY 1 has no PHY ID and can be
> > configured in device tree by setting compatible = "ethernet-phy-id0180.dc81".
> >
> > PHY 1 has less supported registers and functionality. For current driver
> > it will affect only the HWMON support.
> >
> > Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
> > ---
> > drivers/net/phy/nxp-tja11xx.c | 102 ++++++++++++++++++++++++++++++++++
> > 1 file changed, 102 insertions(+)
> >
> > diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
> > index b705d0bd798b..f79c9aa051ed 100644
> > --- a/drivers/net/phy/nxp-tja11xx.c
> > +++ b/drivers/net/phy/nxp-tja11xx.c
> > @@ -15,6 +15,7 @@
> > #define PHY_ID_MASK 0xfffffff0
> > #define PHY_ID_TJA1100 0x0180dc40
> > #define PHY_ID_TJA1101 0x0180dd00
> > +#define PHY_ID_TJA1102 0x0180dc80
> >
> > #define MII_ECTRL 17
> > #define MII_ECTRL_LINK_CONTROL BIT(15)
> > @@ -40,6 +41,10 @@
> > #define MII_INTSRC_TEMP_ERR BIT(1)
> > #define MII_INTSRC_UV_ERR BIT(3)
> >
> > +#define MII_INTEN 22
> > +#define MII_INTEN_LINK_FAIL BIT(10)
> > +#define MII_INTEN_LINK_UP BIT(9)
> > +
> > #define MII_COMMSTAT 23
> > #define MII_COMMSTAT_LINK_UP BIT(15)
> >
> > @@ -190,6 +195,7 @@ static int tja11xx_config_init(struct phy_device *phydev)
> > return ret;
> > break;
> > case PHY_ID_TJA1101:
> > + case PHY_ID_TJA1102:
> > ret = phy_set_bits(phydev, MII_COMMCFG, MII_COMMCFG_AUTO_OP);
> > if (ret)
> > return ret;
> > @@ -354,6 +360,66 @@ static int tja11xx_probe(struct phy_device *phydev)
> > return PTR_ERR_OR_ZERO(priv->hwmon_dev);
> > }
> >
> > +static int tja1102_match_phy_device(struct phy_device *phydev, bool port0)
> > +{
> > + int ret;
> > +
> > + if ((phydev->phy_id & PHY_ID_MASK) != PHY_ID_TJA1102)
>
> For port 1 you rely on DT forcing the appropriate phy_id
> (else it would be 0 and port 1 wouldn't be matched).
> This is worth a describing comment.

There is a second patch which will do it automatically, no need to force
the PHY ID in the devicetree.

> > + return 0;
> > +
> > + ret = phy_read(phydev, MII_PHYSID2);
> > + if (ret < 0)
> > + return ret;
> > +
> > + /* TJA1102 Port 1 has phyid 0 and doesn't support temperature
> > + * and undervoltage alarms.
> > + */
> > + if (port0)
> > + return ret ? 1 : 0;
> > +
> > + return !ret;
> > +}
> > +
> > +static int tja1102_p0_match_phy_device(struct phy_device *phydev)
> > +{
> > + return tja1102_match_phy_device(phydev, true);
> > +}
> > +
> > +static int tja1102_p1_match_phy_device(struct phy_device *phydev)
> > +{
> > + return tja1102_match_phy_device(phydev, false);
> > +}
> > +
> > +static int tja11xx_ack_interrupt(struct phy_device *phydev)
> > +{
> > + int ret;
> > +
> > + ret = phy_read(phydev, MII_INTSRC);
> > +
> > + return (ret < 0) ? ret : 0;
> > +}
> > +
> > +static int tja11xx_config_intr(struct phy_device *phydev)
> > +{
> > + int value;
> > + int ret;
> > +
> > + value = phy_read(phydev, MII_INTEN);
> > + if (value < 0)
> > + return value;
> > +
> > + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
> > + value |= MII_INTEN_LINK_FAIL;
> > + value |= MII_INTEN_LINK_UP;
> > +
>
> This may leave unwanted interrupt sources active. Why not
> simply setting a fixed value like in the else clause?

done

> > + ret = phy_write(phydev, MII_INTEN, value);
> > + }
> > + else
>
> Kernel style:
> Closing brace and else belong to one line. And the else clause
> needs braces too. checkpatch.pl should complain here.

done

> > + ret = phy_write(phydev, MII_INTEN, 0);
> > +
> > + return ret;
> > +}
> > +
> > static struct phy_driver tja11xx_driver[] = {
> > {
> > PHY_ID_MATCH_MODEL(PHY_ID_TJA1100),
> > @@ -385,6 +451,41 @@ static struct phy_driver tja11xx_driver[] = {
> > .get_sset_count = tja11xx_get_sset_count,
> > .get_strings = tja11xx_get_strings,
> > .get_stats = tja11xx_get_stats,
> > + }, {
> > + .name = "NXP TJA1102 Port 0",
> > + .features = PHY_BASIC_T1_FEATURES,
> > + .probe = tja11xx_probe,
> > + .soft_reset = tja11xx_soft_reset,
> > + .config_init = tja11xx_config_init,
> > + .read_status = tja11xx_read_status,
> > + .match_phy_device = tja1102_p0_match_phy_device,
> > + .suspend = genphy_suspend,
> > + .resume = genphy_resume,
> > + .set_loopback = genphy_loopback,
> > + /* Statistics */
> > + .get_sset_count = tja11xx_get_sset_count,
> > + .get_strings = tja11xx_get_strings,
> > + .get_stats = tja11xx_get_stats,
> > + .ack_interrupt = tja11xx_ack_interrupt,
> > + .config_intr = tja11xx_config_intr,
> > +
> > + }, {
> > + .name = "NXP TJA1102 Port 1",
> > + .features = PHY_BASIC_T1_FEATURES,
> > + /* currently no probe for Port 1 is need */
> > + .soft_reset = tja11xx_soft_reset,
> > + .config_init = tja11xx_config_init,
> > + .read_status = tja11xx_read_status,
> > + .match_phy_device = tja1102_p1_match_phy_device,
> > + .suspend = genphy_suspend,
> > + .resume = genphy_resume,
> > + .set_loopback = genphy_loopback,
> > + /* Statistics */
> > + .get_sset_count = tja11xx_get_sset_count,
> > + .get_strings = tja11xx_get_strings,
> > + .get_stats = tja11xx_get_stats,
> > + .ack_interrupt = tja11xx_ack_interrupt,
> > + .config_intr = tja11xx_config_intr,
> > }
> > };
> >
> > @@ -393,6 +494,7 @@ module_phy_driver(tja11xx_driver);
> > static struct mdio_device_id __maybe_unused tja11xx_tbl[] = {
> > { PHY_ID_MATCH_MODEL(PHY_ID_TJA1100) },
> > { PHY_ID_MATCH_MODEL(PHY_ID_TJA1101) },
> > + { PHY_ID_MATCH_MODEL(PHY_ID_TJA1102) },
> > { }
> > };
> >
> >
>
>
>

--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |

Attachment: signature.asc
Description: PGP signature