Re: [PATCH] mmc: sdhci-of-at91: fix cd-gpios for SAMA5D2

From: Ulf Hansson
Date: Tue Mar 17 2020 - 07:59:05 EST


On Sun, 15 Mar 2020 at 17:44, MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx> wrote:
>
> SAMA5D2x doesn't drive CMD line if GPIO is used as CD line (at least
> SAMA5D27 doesn't). Fix this by forcing card-detect in the module
> if module-controlled CD is not used.
>
> Fixed commit addresses the problem only for non-removable cards. This
> amends it to also cover gpio-cd case.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: 7a1e3f143176 ("mmc: sdhci-of-at91: force card detect value for non removable devices")
> Signed-off-by: MichaÅ MirosÅaw <mirq-linux@xxxxxxxxxxxx>

Applied for fixes, thanks!

Kind regards
Uffe


> ---
> drivers/mmc/host/sdhci-of-at91.c | 8 ++++++--
> 1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c
> index d90f4ed18283..8f8da2fe48a9 100644
> --- a/drivers/mmc/host/sdhci-of-at91.c
> +++ b/drivers/mmc/host/sdhci-of-at91.c
> @@ -185,7 +185,8 @@ static void sdhci_at91_reset(struct sdhci_host *host, u8 mask)
>
> sdhci_reset(host, mask);
>
> - if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
> + if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
> + || mmc_gpio_get_cd(host->mmc) >= 0)
> sdhci_at91_set_force_card_detect(host);
>
> if (priv->cal_always_on && (mask & SDHCI_RESET_ALL))
> @@ -487,8 +488,11 @@ static int sdhci_at91_probe(struct platform_device *pdev)
> * detection procedure using the SDMCC_CD signal is bypassed.
> * This bit is reset when a software reset for all command is performed
> * so we need to implement our own reset function to set back this bit.
> + *
> + * WA: SAMA5D2 doesn't drive CMD if using CD GPIO line.
> */
> - if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
> + if ((host->mmc->caps & MMC_CAP_NONREMOVABLE)
> + || mmc_gpio_get_cd(host->mmc) >= 0)
> sdhci_at91_set_force_card_detect(host);
>
> pm_runtime_put_autosuspend(&pdev->dev);
> --
> 2.20.1
>