Re: [PATCH v4 1/4] dt-bindings: phy: qcom,qmp: Convert QMP PHY bindings to yaml

[Stephen Boyd]

Quoting Sandeep Maheswaram (2020-03-11 05:04:09)
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> new file mode 100644
> index 0000000..39ec3f24
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
> @@ -0,0 +1,311 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/phy/qcom,qmp-phy.yaml#";
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#";
> +
> +title: Qualcomm QMP PHY controller
> +
> +maintainers:
> +  - Manu Gautam <mgautam@xxxxxxxxxxxxxx>
> +
> +description:
> +  QMP phy controller supports physical layer functionality for a number of
> +  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,ipq8074-qmp-pcie-phy
> +      - qcom,msm8996-qmp-pcie-phy
> +      - qcom,msm8996-qmp-usb3-phy
> +      - qcom,msm8998-qmp-pcie-phy
> +      - qcom,msm8998-qmp-ufs-phy
> +      - qcom,msm8998-qmp-usb3-phy
> +      - qcom,sdm845-qhp-pcie-phy
> +      - qcom,sdm845-qmp-pcie-phy
> +      - qcom,sdm845-qmp-ufs-phy
> +      - qcom,sdm845-qmp-usb3-phy
> +      - qcom,sdm845-qmp-usb3-uni-phy

I was looking at the DP phy binding in another thread and I'm wondering
what qmp-usb3-uni-phy means. Is that a usb3 phy that doesn't have DP phy
combined with it? It looks like the DP phy binding needs to be merged
with this binding (and some of the driver part too), so I'm not sure
this binding is correct as it stands. Probably needs to be updated to
support DP too.

> +      - qcom,sm8150-qmp-ufs-phy
> +
> +  reg:
> +    minItems: 1
> +    items:
> +      - description: Address and length of PHY's common serdes block.
> +      - description: Address and length of the DP_COM control block.
> +
> +  reg-names:
> +    items:
> +      - const: reg-base
> +      - const: dp_com
> +
> +  "#clock-cells":
> +     enum: [ 1, 2 ]
> +
> +  "#address-cells":
> +    enum: [ 1, 2 ]
> +
> +  "#size-cells":
> +    enum: [ 1, 2 ]
> +
> +  clocks:
> +    minItems: 1
> +    maxItems: 4
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 4
> +
> +  resets:
> +    minItems: 1
> +    maxItems: 3
> +
> +  reset-names:
> +    minItems: 1
> +    maxItems: 3
> +
> +  vdda-phy-supply:
> +    description:
> +        Phandle to a regulator supply to PHY core block.
> +
> +  vdda-pll-supply:
> +    description:
> +        Phandle to 1.8V regulator supply to PHY refclk pll block.
> +
> +  vddp-ref-clk-supply:
> +    description:
> +        Phandle to a regulator supply to any specific refclk
> +        pll block.
> +
> +#Required nodes:
> +patternProperties:
> +  "^phy@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Each device node of QMP phy is required to have as many child nodes as
> +      the number of lanes the PHY has.
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#clock-cells"
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - vdda-phy-supply
> +  - vdda-pll-supply
> +
> +additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            enum:
> +              - qcom,sdm845-qmp-usb3-phy
> +              - qcom,sdm845-qmp-usb3-uni-phy
> +    then:

There's a lot of if-then nesting stuff. Maybe we could split the binding
into many files for the different compatibles so that it is more
readable.

> +      properties:
> +        clocks: