Re: [PATCH 1/6] thermal: hwmon: Replace the call the thermal_cdev_update()

[Daniel Lezcano]

On 11/04/2020 03:32, Guenter Roeck wrote:
> On 4/10/20 3:12 PM, Daniel Lezcano wrote:
>> The function thermal_cdev_upadte is called from the throttling
> 
> misspelled
> 
>> functions in the governors not from the cooling device itself.
>>
>> The cooling device is set to its maximum state and then updated. Even
>> if I don't get the purpose of probing the pwm-fan to its maximum
>> cooling state, we can replace the thermal_cdev_update() call to the
>> internal set_cur_state() function directly.
>>
>> Signed-off-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
>> ---
>>  drivers/hwmon/pwm-fan.c | 3 +--
>>  1 file changed, 1 insertion(+), 2 deletions(-)
>>
>> diff --git a/drivers/hwmon/pwm-fan.c b/drivers/hwmon/pwm-fan.c
>> index 30b7b3ea8836..a654ecdf21ab 100644
>> --- a/drivers/hwmon/pwm-fan.c
>> +++ b/drivers/hwmon/pwm-fan.c
>> @@ -372,7 +372,6 @@ static int pwm_fan_probe(struct platform_device *pdev)
>>  	if (ret)
>>  		return ret;
>>  
>> -	ctx->pwm_fan_state = ctx->pwm_fan_max_state;
>>  	if (IS_ENABLED(CONFIG_THERMAL)) {
>>  		cdev = devm_thermal_of_cooling_device_register(dev,
>>  			dev->of_node, "pwm-fan", ctx, &pwm_fan_cooling_ops);
>> @@ -384,7 +383,7 @@ static int pwm_fan_probe(struct platform_device *pdev)
>>  			return ret;
>>  		}
>>  		ctx->cdev = cdev;
>> -		thermal_cdev_update(cdev);
>> +		pwm_fan_set_cur_state(cdev, ctx->pwm_fan_max_state);
> 
> So far the function would only change the state if the new
> state is not equal to the old state. This was the case because
> pwm_fan_state was set to pwm_fan_max_state, and the call to
> thermal_cdev_update() and thus pwm_fan_set_cur_state() would
> do nothing except update statistics. The old code _assumed_
> that the current state is pwm_fan_max_state. The new code
> enforces it. That is a substantial semantic change, and it
> is not really reflected in the commit message. Is that really
> what you want ? If so, the commit message needs to state that
> and explain the rationale.

Well, to be honest I'm not getting the rational of calling
thermal_cdev_update(cdev) right after
devm_thermal_of_cooling_device_register() neither setting pwm_fan_state
to pwm_fan_max_state.

Do we have the guarantee there is at this point a thermal instance
making the target state working when thermal_cdev_update is called?

Are we sure a thermal_cdev_update(cdev) is actually right here?


-- 
<http://www.linaro.org/> Linaro.org â Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog