Re: [PATCH V1] mmc: sdhci-msm: Enable ADMA length mismatch error interrupt

[Adrian Hunter]

On 12/04/20 8:07 pm, Veerabhadrarao Badiganti wrote:
> ADMA_ERR_SIZE_EN bit of VENDOR_SPECIFIC_FUNC register controls
> ADMA length mismatch error interrupt. Enable it by default.
> 
> And update all bit shift defines with BIT macro.
> 
> Signed-off-by: Veerabhadrarao Badiganti <vbadigan@xxxxxxxxxxxxxx>

Acked-by: Adrian Hunter <adrian.hunter@xxxxxxxxx>

> ---
>  drivers/mmc/host/sdhci-msm.c | 10 +++++-----
>  1 file changed, 5 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> index 482045b..7d744f9 100644
> --- a/drivers/mmc/host/sdhci-msm.c
> +++ b/drivers/mmc/host/sdhci-msm.c
> @@ -56,19 +56,19 @@
>  #define CORE_FLL_CYCLE_CNT	BIT(18)
>  #define CORE_DLL_CLOCK_DISABLE	BIT(21)
>  
> -#define CORE_VENDOR_SPEC_POR_VAL 0xa1c
> +#define CORE_VENDOR_SPEC_POR_VAL 0xa9c
>  #define CORE_CLK_PWRSAVE	BIT(1)
>  #define CORE_HC_MCLK_SEL_DFLT	(2 << 8)
>  #define CORE_HC_MCLK_SEL_HS400	(3 << 8)
>  #define CORE_HC_MCLK_SEL_MASK	(3 << 8)
> -#define CORE_IO_PAD_PWR_SWITCH_EN	(1 << 15)
> -#define CORE_IO_PAD_PWR_SWITCH  (1 << 16)
> +#define CORE_IO_PAD_PWR_SWITCH_EN	BIT(15)
> +#define CORE_IO_PAD_PWR_SWITCH	BIT(16)
>  #define CORE_HC_SELECT_IN_EN	BIT(18)
>  #define CORE_HC_SELECT_IN_HS400	(6 << 19)
>  #define CORE_HC_SELECT_IN_MASK	(7 << 19)
>  
> -#define CORE_3_0V_SUPPORT	(1 << 25)
> -#define CORE_1_8V_SUPPORT	(1 << 26)
> +#define CORE_3_0V_SUPPORT	BIT(25)
> +#define CORE_1_8V_SUPPORT	BIT(26)
>  #define CORE_VOLT_SUPPORT	(CORE_3_0V_SUPPORT | CORE_1_8V_SUPPORT)
>  
>  #define CORE_CSR_CDC_CTLR_CFG0		0x130
>