[PATCH v2 04/17] arm64: dts: sc7180: Add OPP table for all qup devices

From: Rajendra Nayak
Date: Fri Apr 17 2020 - 10:05:52 EST

Next message: Rajendra Nayak: "[PATCH v2 08/17] arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains"
Previous message: Rajendra Nayak: "[PATCH v2 05/17] drm/msm/dpu: Use OPP API to set clk/perf state"
In reply to: Rajendra Nayak: "Re: [PATCH v2 05/17] drm/msm/dpu: Use OPP API to set clk/perf state"
Next in thread: Rajendra Nayak: "[PATCH v2 08/17] arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]

qup has a requirement to vote on the performance state of the CX domain
in sc7180 devices. Add OPP tables for these and also add power-domains
property for all qup instances.

Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 79 ++++++++++++++++++++++++++++++++++++
1 file changed, 79 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 998f101..efba600 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -417,6 +417,25 @@
status = "disabled";
};

+ qup_opp_table: qup-opp-table {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmhpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmhpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmhpd_opp_nom>;
+ };
+ };
+
qupv3_id_0: geniqup@8c0000 {
compatible = "qcom,geni-se-qup";
reg = <0 0x008c0000 0 0x6000>;
@@ -452,6 +471,8 @@
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -463,6 +484,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart0_default>;
interrupts = <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -476,6 +499,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -489,6 +514,8 @@
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -500,6 +527,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart1_default>;
interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -513,6 +542,8 @@
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -524,6 +555,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart2_default>;
interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -537,6 +570,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -550,6 +585,8 @@
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -561,6 +598,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart3_default>;
interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -574,6 +613,8 @@
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -585,6 +626,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart4_default>;
interrupts = <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -598,6 +641,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -611,6 +656,8 @@
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -622,6 +669,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart5_default>;
interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
@@ -661,6 +710,8 @@
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -672,6 +723,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart6_default>;
interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -685,6 +738,8 @@
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -696,6 +751,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart7_default>;
interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -709,6 +766,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -722,6 +781,8 @@
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -733,6 +794,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart8_default>;
interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -746,6 +809,8 @@
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -757,6 +822,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart9_default>;
interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -770,6 +837,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -783,6 +852,8 @@
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -794,6 +865,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart10_default>;
interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -807,6 +880,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -820,6 +895,8 @@
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};

@@ -831,6 +908,8 @@
pinctrl-names = "default";
pinctrl-0 = <&qup_uart11_default>;
interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmhpd SC7180_CX>;
+ operating-points-v2 = <&qup_opp_table>;
status = "disabled";
};
};
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation

Next message: Rajendra Nayak: "[PATCH v2 08/17] arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains"
Previous message: Rajendra Nayak: "[PATCH v2 05/17] drm/msm/dpu: Use OPP API to set clk/perf state"
In reply to: Rajendra Nayak: "Re: [PATCH v2 05/17] drm/msm/dpu: Use OPP API to set clk/perf state"
Next in thread: Rajendra Nayak: "[PATCH v2 08/17] arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]