Re: [PATCH V2 1/3] iio: adc: Convert the QCOM SPMI ADC bindings to .yaml format

[Jonathan Cameron]

On Wed, 15 Apr 2020 14:47:44 +0530
Jishnu Prakash <jprakash@xxxxxxxxxxxxxx> wrote:

> Convert the adc bindings from .txt to .yaml format.
> 

I read patch 2 before this one for some reason but same question applies here
Given we are now enforcing a lot of the values explicitly are we better
off dropping the text description of that.  It looks to me like a potential
place to get out of sync given the information is a bit further down.

> Signed-off-by: Jishnu Prakash <jprakash@xxxxxxxxxxxxxx>
> ---
>  .../devicetree/bindings/iio/adc/qcom,spmi-vadc.txt | 173 -------------
>  .../bindings/iio/adc/qcom,spmi-vadc.yaml           | 288 +++++++++++++++++++++
>  2 files changed, 288 insertions(+), 173 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> deleted file mode 100644
> index c878768..0000000
> --- a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.txt
> +++ /dev/null
> @@ -1,173 +0,0 @@
> -Qualcomm's SPMI PMIC ADC
> -
> -- SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> -  voltage. The VADC is a 15-bit sigma-delta ADC.
> -- SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> -  voltage. The VADC is a 16-bit sigma-delta ADC.
> -
> -VADC node:
> -
> -- compatible:
> -    Usage: required
> -    Value type: <string>
> -    Definition: Should contain "qcom,spmi-vadc".
> -                Should contain "qcom,spmi-adc5" for PMIC5 ADC driver.
> -                Should contain "qcom,spmi-adc-rev2" for PMIC rev2 ADC driver.
> -                Should contain "qcom,pms405-adc" for PMS405 PMIC
> -
> -- reg:
> -    Usage: required
> -    Value type: <prop-encoded-array>
> -    Definition: VADC base address in the SPMI PMIC register map.
> -
> -- #address-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be one. Child node 'reg' property should define ADC
> -            channel number.
> -
> -- #size-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be zero.
> -
> -- #io-channel-cells:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: Must be one. For details about IIO bindings see:
> -            Documentation/devicetree/bindings/iio/iio-bindings.txt
> -
> -- interrupts:
> -    Usage: optional
> -    Value type: <prop-encoded-array>
> -    Definition: End of conversion interrupt.
> -
> -Channel node properties:
> -
> -- reg:
> -    Usage: required
> -    Value type: <u32>
> -    Definition: ADC channel number.
> -            See include/dt-bindings/iio/qcom,spmi-vadc.h
> -
> -- label:
> -    Usage: required for "qcom,spmi-adc5" and "qcom,spmi-adc-rev2"
> -    Value type: <empty>
> -    Definition: ADC input of the platform as seen in the schematics.
> -            For thermistor inputs connected to generic AMUX or GPIO inputs
> -            these can vary across platform for the same pins. Hence select
> -            the platform schematics name for this channel.
> -
> -- qcom,decimation:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: This parameter is used to decrease ADC sampling rate.
> -            Quicker measurements can be made by reducing decimation ratio.
> -            - For compatible property "qcom,spmi-vadc", valid values are
> -              512, 1024, 2048, 4096. If property is not found, default value
> -              of 512 will be used.
> -            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
> -              and 840. If property is not found, default value of 840 is used.
> -            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
> -              512 and 1024. If property is not present, default value is 1024.
> -
> -- qcom,pre-scaling:
> -    Usage: optional
> -    Value type: <u32 array>
> -    Definition: Used for scaling the channel input signal before the signal is
> -            fed to VADC. The configuration for this node is to know the
> -            pre-determined ratio and use it for post scaling. Select one from
> -            the following options.
> -            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
> -            If property is not found default value depending on chip will be used.
> -
> -- qcom,ratiometric:
> -    Usage: optional
> -    Value type: <empty>
> -    Definition: Channel calibration type.
> -            - For compatible property "qcom,spmi-vadc", if this property is
> -              specified VADC will use the VDD reference (1.8V) and GND for
> -              channel calibration. If property is not found, channel will be
> -              calibrated with 0.625V and 1.25V reference channels, also
> -              known as absolute calibration.
> -            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> -              if this property is specified VADC will use the VDD reference
> -              (1.875V) and GND for channel calibration. If property is not found,
> -              channel will be calibrated with 0V and 1.25V reference channels,
> -              also known as absolute calibration.
> -
> -- qcom,hw-settle-time:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: Time between AMUX getting configured and the ADC starting
> -            conversion. The 'hw_settle_time' is an index used from valid values
> -            and programmed in hardware to achieve the hardware settling delay.
> -            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
> -              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
> -              and 2ms * (hw_settle_time - 10) otherwise.
> -              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
> -              900 us and 1, 2, 4, 6, 8, 10 ms.
> -              If property is not found, channel will use 0us.
> -            - For compatible property "qcom,spmi-adc5", delay = 15us for
> -              value 0, 100us * (value) for values < 11,
> -              and 2ms * (value - 10) otherwise.
> -              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
> -              900 us and 1, 2, 4, 6, 8, 10 ms
> -              Certain controller digital versions have valid values of
> -              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
> -              If property is not found, channel will use 15us.
> -
> -- qcom,avg-samples:
> -    Usage: optional
> -    Value type: <u32>
> -    Definition: Number of samples to be used for measurement.
> -            Averaging provides the option to obtain a single measurement
> -            from the ADC that is an average of multiple samples. The value
> -            selected is 2^(value).
> -            - For compatible property "qcom,spmi-vadc", valid values
> -              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
> -              If property is not found, 1 sample will be used.
> -            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> -              valid values are: 1, 2, 4, 8, 16
> -              If property is not found, 1 sample will be used.
> -
> -NOTE:
> -
> -For compatible property "qcom,spmi-vadc" following channels, also known as
> -reference point channels, are used for result calibration and their channel
> -configuration nodes should be defined:
> -VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> -VADC_GND_REF and VADC_VDD_VADC.
> -
> -Example:
> -
> -#include <dt-bindings/iio/qcom,spmi-vadc.h>
> -#include <linux/irq.h>
> -/* ... */
> -
> -	/* VADC node */
> -	pmic_vadc: vadc@3100 {
> -		compatible = "qcom,spmi-vadc";
> -		reg = <0x3100>;
> -		interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
> -		#address-cells = <1>;
> -		#size-cells = <0>;
> -		#io-channel-cells = <1>;
> -		io-channel-ranges;
> -
> -		/* Channel node */
> -		adc-chan@VADC_LR_MUX10_USB_ID {
> -			reg = <VADC_LR_MUX10_USB_ID>;
> -			qcom,decimation = <512>;
> -			qcom,ratiometric;
> -			qcom,hw-settle-time = <200>;
> -			qcom,avg-samples = <1>;
> -			qcom,pre-scaling = <1 3>;
> -		};
> -	};
> -
> -	/* IIO client node */
> -	usb {
> -		io-channels = <&pmic_vadc VADC_LR_MUX10_USB_ID>;
> -		io-channel-names = "vadc";
> -	};
> diff --git a/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> new file mode 100644
> index 0000000..8273981
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/qcom,spmi-vadc.yaml
> @@ -0,0 +1,288 @@
> +# SPDX-License-Identifier: GPL-2.0-only
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/adc/qcom,spmi-vadc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm's SPMI PMIC ADC
> +
> +maintainers:
> +  - Andy Gross <agross@xxxxxxxxxx>
> +  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
> +
> +description: |
> +  SPMI PMIC voltage ADC (VADC) provides interface to clients to read
> +  voltage. The VADC is a 15-bit sigma-delta ADC.
> +  SPMI PMIC5 voltage ADC (ADC) provides interface to clients to read
> +  voltage. The VADC is a 16-bit sigma-delta ADC.
> +
> +properties:
> +  compatible:
> +    oneOf:
> +      - items:
> +          - const: qcom,pms405-adc
> +          - const: qcom,spmi-adc-rev2
> +
> +      - items:
> +        - enum:
> +          - qcom,spmi-vadc
> +          - qcom,spmi-adc5
> +          - qcom,spmi-adc-rev2
> +
> +  reg:
> +    description: VADC base address in the SPMI PMIC register map
> +    maxItems: 1
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 0
> +
> +  '#io-channel-cells':
> +    const: 1
> +
> +  interrupts:
> +    maxItems: 1
> +    description:
> +      End of conversion interrupt.
> +
> +required:
> +  - compatible
> +  - reg
> +  - '#address-cells'
> +  - '#size-cells'
> +  - '#io-channel-cells'
> +
> +patternProperties:
> +  "^.*@[0-9a-fx]+$":
> +    type: object
> +    description: |
> +      Represents the external channels which are connected to the ADC.
> +      For compatible property "qcom,spmi-vadc" following channels, also known as
> +      reference point channels, are used for result calibration and their channel
> +      configuration nodes should be defined:
> +      VADC_REF_625MV and/or VADC_SPARE1(based on PMIC version) VADC_REF_1250MV,
> +      VADC_GND_REF and VADC_VDD_VADC.
> +
> +    properties:
> +      reg:
> +        description: |
> +          ADC channel number.
> +          See include/dt-bindings/iio/qcom,spmi-vadc.h
> +
> +      label:
> +        $ref: /schemas/types.yaml#/definitions/string
> +        description: |
> +            ADC input of the platform as seen in the schematics.
> +            For thermistor inputs connected to generic AMUX or GPIO inputs
> +            these can vary across platform for the same pins. Hence select
> +            the platform schematics name for this channel.
> +
> +      qcom,decimation:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            This parameter is used to decrease ADC sampling rate.
> +            Quicker measurements can be made by reducing decimation ratio.
> +            - For compatible property "qcom,spmi-vadc", valid values are
> +              512, 1024, 2048, 4096. If property is not found, default value
> +              of 512 will be used.
> +            - For compatible property "qcom,spmi-adc5", valid values are 250, 420
> +              and 840. If property is not found, default value of 840 is used.
> +            - For compatible property "qcom,spmi-adc-rev2", valid values are 256,
> +              512 and 1024. If property is not present, default value is 1024.
> +
> +      qcom,pre-scaling:
> +        description: |
> +            Used for scaling the channel input signal before the signal is
> +            fed to VADC. The configuration for this node is to know the
> +            pre-determined ratio and use it for post scaling. It is a pair of
> +            integers, denoting the numerator and denominator of the fraction by which
> +            input signal is multiplied. For example, <1 3> indicates the signal is scaled
> +            down to 1/3 of its value before ADC measurement. Select one from
> +            the following options.
> +            <1 1>, <1 3>, <1 4>, <1 6>, <1 20>, <1 8>, <10 81>, <1 10>
> +            If property is not found default value depending on chip will be used.
> +        allOf:
> +          - $ref: /schemas/types.yaml#/definitions/uint32-array
> +        oneOf:
> +          - items:
> +            - const: 1
> +            - enum: [ 1, 3, 4, 6, 20, 8, 10 ]
> +
> +          - items:
> +            - const: 10
> +            - const: 81
> +
> +      qcom,ratiometric:
> +        description: |
> +            Channel calibration type.
> +            - For compatible property "qcom,spmi-vadc", if this property is
> +              specified VADC will use the VDD reference (1.8V) and GND for
> +              channel calibration. If property is not found, channel will be
> +              calibrated with 0.625V and 1.25V reference channels, also
> +              known as absolute calibration.
> +            - For compatible property "qcom,spmi-adc5" and "qcom,spmi-adc-rev2",
> +              if this property is specified VADC will use the VDD reference (1.875V)
> +              and GND for channel calibration. If property is not found, channel
> +              will be calibrated with 0V and 1.25V reference channels, also known
> +              as absolute calibration.
> +        type: boolean
> +
> +      qcom,hw-settle-time:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            Time between AMUX getting configured and the ADC starting
> +            conversion. The 'hw_settle_time' is an index used from valid values
> +            and programmed in hardware to achieve the hardware settling delay.
> +            - For compatible property "qcom,spmi-vadc" and "qcom,spmi-adc-rev2",
> +              Delay = 100us * (hw_settle_time) for hw_settle_time < 11,
> +              and 2ms * (hw_settle_time - 10) otherwise.
> +              Valid values are: 0, 100, 200, 300, 400, 500, 600, 700, 800,
> +              900 us and 1, 2, 4, 6, 8, 10 ms.
> +              If property is not found, channel will use 0us.
> +            - For compatible property "qcom,spmi-adc5", delay = 15us for
> +              value 0, 100us * (value) for values < 11,
> +              and 2ms * (value - 10) otherwise.
> +              Valid values are: 15, 100, 200, 300, 400, 500, 600, 700, 800,
> +              900 us and 1, 2, 4, 6, 8, 10 ms
> +              Certain controller digital versions have valid values of
> +              15, 100, 200, 300, 400, 500, 600, 700, 1, 2, 4, 8, 16, 32, 64, 128 ms
> +              If property is not found, channel will use 15us.
> +
> +      qcom,avg-samples:
> +        $ref: /schemas/types.yaml#/definitions/uint32
> +        description: |
> +            Number of samples to be used for measurement.
> +            Averaging provides the option to obtain a single measurement
> +            from the ADC that is an average of multiple samples. The value
> +            selected is 2^(value).
> +            - For compatible property "qcom,spmi-vadc", valid values
> +              are: 1, 2, 4, 8, 16, 32, 64, 128, 256, 512
> +              If property is not found, 1 sample will be used.
> +
> +    required:
> +      - reg
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-vadc
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-fx]+$":
> +          minItems: 4
> +          properties:
> +            qcom,decimation:
> +              items:
> +                enum: [ 512, 1024, 2048, 4096 ]
> +                default: 512
> +
> +            qcom,hw-settle-time:
> +              items:
> +                enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                        4, 6, 8, 10 ]
> +                default: 0
> +
> +            qcom,avg-samples:
> +              items:
> +                enum: [ 1, 2, 4, 8, 16, 32, 64, 128, 256, 512 ]
> +                default: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-adc-rev2
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-fx]+$":
> +          properties:
> +            qcom,decimation:
> +              items:
> +                enum: [ 256, 512, 1024 ]
> +                default: 1024
> +
> +            qcom,hw-settle-time:
> +              items:
> +                enum: [ 0, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                        4, 6, 8, 10 ]
> +                default: 0
> +
> +            qcom,avg-samples:
> +              items:
> +                enum: [ 1, 2, 4, 8, 16 ]
> +                default: 1
> +
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: qcom,spmi-adc5
> +
> +    then:
> +      patternProperties:
> +        "^.*@[0-9a-fx]+$":
> +          properties:
> +            qcom,decimation:
> +              items:
> +                enum: [ 250, 420, 840 ]
> +                default: 840
> +
> +            qcom,hw-settle-time:
> +              items:
> +                enum: [ 15, 100, 200, 300, 400, 500, 600, 700, 800, 900, 1, 2,
> +                        4, 6, 8, 10, 16, 32, 64, 128 ]
> +                default: 15
> +
> +            qcom,avg-samples:
> +              items:
> +                enum: [ 1, 2, 4, 8, 16 ]
> +                default: 1
> +
> +examples:
> +  - |
> +    spmi_bus {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      /* VADC node */
> +      pmic_vadc: adc@3100 {
> +        compatible = "qcom,spmi-vadc";
> +        reg = <0x3100>;
> +        interrupts = <0x0 0x31 0x0 0x1>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        #io-channel-cells = <1>;
> +        io-channel-ranges;
> +
> +        /* Channel node */
> +        adc-chan@0x39 {
> +          reg = <0x39>;
> +          qcom,decimation = <512>;
> +          qcom,ratiometric;
> +          qcom,hw-settle-time = <200>;
> +          qcom,avg-samples = <1>;
> +          qcom,pre-scaling = <1 3>;
> +        };
> +
> +        adc-chan@0x9 {
> +          reg = <0x9>;
> +        };
> +
> +        adc-chan@0xa {
> +          reg = <0xa>;
> +        };
> +
> +        adc-chan@0xe {
> +          reg = <0xe>;
> +        };
> +
> +        adc-chan@0xf {
> +          reg = <0xf>;
> +        };
> +      };
> +    };