Re: [PATCH] dt-bindings: phy: qcom-qusb2: Fix defaults

[Matthias Kaehlcke]

On Thu, Apr 23, 2020 at 11:10:27AM -0700, Douglas Anderson wrote:
> The defaults listed in the bindings don't match what the code is
> actually doing.  Presumably existing users care more about keeping
> existing behavior the same, so change the bindings to match the code
> in Linux.
> 
> The "qcom,preemphasis-level" default has been wrong for quite a long
> time (May 2018).  The other two were recently added.
> 
> As some evidence that these values are wrong, this is from the Linux
> driver:
> - qcom,preemphasis-level: sets "PORT_TUNE1", lower 2 bits.  Driver
>   programs PORT_TUNE1 to 0x30 by default and (0x30 & 0x3) = 0.
> - qcom,bias-ctrl-value: sets "PLL_BIAS_CONTROL_2", lower 6 bits.
>   Driver programs PLL_BIAS_CONTROL_2 to 0x20 by default and (0x20 &
>   0x3f) = 0x20 = 32.
> - qcom,hsdisc-trim-value: sets "PORT_TUNE2", lower 2 bits.  Driver
>   programs PORT_TUNE2 to 0x29 by default and (0x29 & 0x3) = 1.
> 
> Fixes: 1e6f134eb67a ("dt-bindings: phy: qcom-qusb2: Add support for overriding Phy tuning parameters")
> Fixes: a8b70ccf10e3 ("dt-bindings: phy-qcom-usb2: Add support to override tuning values")
> Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
> ---
> 
>  Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
> index 144ae29e7141..f8bd28ff31c1 100644
> --- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
> @@ -97,7 +97,7 @@ then:
>          - $ref: /schemas/types.yaml#/definitions/uint32
>          - minimum: 0
>            maximum: 63
> -          default: 0
> +          default: 32
>  
>      qcom,charge-ctrl-value:
>       description:
> @@ -130,7 +130,7 @@ then:
>          - $ref: /schemas/types.yaml#/definitions/uint32
>          - minimum: 0
>            maximum: 3
> -          default: 2
> +          default: 0
>  
>      qcom,preemphasis-width:
>        description:
> @@ -152,7 +152,7 @@ then:
>          - $ref: /schemas/types.yaml#/definitions/uint32
>          - minimum: 0
>            maximum: 3
> -          default: 0
> +          default: 1
>  
>  required:
>    - compatible
> -- 
> 2.26.1.301.g55bc3eb7cb9-goog

Reviewed-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>