[PATCH] coresight: dynamic-replicator: Fix handling of multiple connections

From: Sai Prakash Ranjan
Date: Sun Apr 26 2020 - 10:37:43 EST


Since commit 30af4fb619e5 ("coresight: dynamic-replicator:
Handle multiple connections"), we do not make sure that
the other port is disabled when the dynamic replicator is
enabled. This is seen to cause the CPU hardlockup atleast
on SC7180 SoC with the following topology when enabling ETM
with ETR as the sink via sysfs. Since there is no trace id
logic in coresight yet to make use of multiple sinks in
parallel for different trace sessions, disable the other
port when one port is turned on.

etm0_out
|
apss_funnel_in0
|
apss_merge_funnel_in
|
funnel1_in4
|
merge_funnel_in1
|
swao_funnel_in
|
etf_in
|
swao_replicator_in
|
replicator_in
|
etr_in

Kernel panic - not syncing: Watchdog detected hard LOCKUP on cpu 0
CPU: 7 PID: 0 Comm: swapper/7 Tainted: G S B 5.4.25 #100
Hardware name: Qualcomm Technologies, Inc. SC7180 IDP (DT)
Call trace:
dump_backtrace+0x0/0x188
show_stack+0x20/0x2c
dump_stack+0xdc/0x144
panic+0x168/0x370
arch_seccomp_spec_mitigate+0x0/0x14
watchdog_timer_fn+0x68/0x290
__hrtimer_run_queues+0x264/0x498
hrtimer_interrupt+0xf0/0x22c
arch_timer_handler_phys+0x40/0x50
handle_percpu_devid_irq+0x8c/0x158
__handle_domain_irq+0x84/0xc4
gic_handle_irq+0x100/0x1c4
el1_irq+0xbc/0x180
arch_cpu_idle+0x3c/0x5c
default_idle_call+0x1c/0x38
do_idle+0x100/0x280
cpu_startup_entry+0x24/0x28
secondary_start_kernel+0x15c/0x170
SMP: stopping secondary CPUs

Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@xxxxxxxxxxxxxx>
Tested-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
---
Changes since RFC:
* Reworded commit text and included the topology on SC7180.
---
.../hwtracing/coresight/coresight-replicator.c | 15 ++++++++++-----
1 file changed, 10 insertions(+), 5 deletions(-)

diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
index e7dc1c31d20d..f4eaa38f8f43 100644
--- a/drivers/hwtracing/coresight/coresight-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-replicator.c
@@ -66,14 +66,16 @@ static int dynamic_replicator_enable(struct replicator_drvdata *drvdata,
int inport, int outport)
{
int rc = 0;
- u32 reg;
+ u32 reg0, reg1;

switch (outport) {
case 0:
- reg = REPLICATOR_IDFILTER0;
+ reg0 = REPLICATOR_IDFILTER0;
+ reg1 = REPLICATOR_IDFILTER1;
break;
case 1:
- reg = REPLICATOR_IDFILTER1;
+ reg0 = REPLICATOR_IDFILTER1;
+ reg1 = REPLICATOR_IDFILTER0;
break;
default:
WARN_ON(1);
@@ -87,8 +89,11 @@ static int dynamic_replicator_enable(struct replicator_drvdata *drvdata,
rc = coresight_claim_device_unlocked(drvdata->base);

/* Ensure that the outport is enabled. */
- if (!rc)
- writel_relaxed(0x00, drvdata->base + reg);
+ if (!rc) {
+ writel_relaxed(0x00, drvdata->base + reg0);
+ writel_relaxed(0xff, drvdata->base + reg1);
+ }
+
CS_LOCK(drvdata->base);

return rc;
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation