[PATCH net-next v4 2/2] net: phy: tja11xx: add support for master-slave configuration

From: Oleksij Rempel
Date: Fri May 01 2020 - 03:47:05 EST


The TJA11xx PHYs have a vendor specific Master/Slave configuration bit,
which is not compatible with IEEE 803.2-2018 spec for 100Base-T1
devices. So, provide a custom config_ange call back to solve this
problem.

Signed-off-by: Oleksij Rempel <o.rempel@xxxxxxxxxxxxxx>
---
drivers/net/phy/nxp-tja11xx.c | 47 ++++++++++++++++++++++++++++++++++-
1 file changed, 46 insertions(+), 1 deletion(-)

diff --git a/drivers/net/phy/nxp-tja11xx.c b/drivers/net/phy/nxp-tja11xx.c
index cc766b2d4136e..0a7ea4768bc78 100644
--- a/drivers/net/phy/nxp-tja11xx.c
+++ b/drivers/net/phy/nxp-tja11xx.c
@@ -30,6 +30,7 @@
#define MII_ECTRL_WAKE_REQUEST BIT(0)

#define MII_CFG1 18
+#define MII_CFG1_MASTER_SLAVE BIT(15)
#define MII_CFG1_AUTO_OP BIT(14)
#define MII_CFG1_SLEEP_CONFIRM BIT(6)
#define MII_CFG1_LED_MODE_MASK GENMASK(5, 4)
@@ -167,6 +168,31 @@ static int tja11xx_soft_reset(struct phy_device *phydev)
return genphy_soft_reset(phydev);
}

+static int tja11xx_config_aneg(struct phy_device *phydev)
+{
+ u16 ctl = 0;
+ int ret;
+
+ switch (phydev->master_slave_set) {
+ case MASTER_SLAVE_CFG_MASTER_FORCE:
+ ctl |= MII_CFG1_MASTER_SLAVE;
+ break;
+ case MASTER_SLAVE_CFG_SLAVE_FORCE:
+ break;
+ case MASTER_SLAVE_CFG_UNKNOWN:
+ return 0;
+ default:
+ phydev_warn(phydev, "Unsupported Master/Slave mode\n");
+ return -ENOTSUPP;
+ }
+
+ ret = phy_modify_changed(phydev, MII_CFG1, MII_CFG1_MASTER_SLAVE, ctl);
+ if (ret < 0)
+ return ret;
+
+ return __genphy_config_aneg(phydev, ret);
+}
+
static int tja11xx_config_init(struct phy_device *phydev)
{
int ret;
@@ -222,12 +248,25 @@ static int tja11xx_config_init(struct phy_device *phydev)

static int tja11xx_read_status(struct phy_device *phydev)
{
- int ret;
+ int cfg, state = 0;
+ int ret, cfg1;
+
+ phydev->master_slave_get = MASTER_SLAVE_CFG_UNKNOWN;
+ phydev->master_slave_state = MASTER_SLAVE_STATE_UNSUPPORTED;

ret = genphy_update_link(phydev);
if (ret)
return ret;

+ cfg1 = phy_read(phydev, MII_CFG1);
+ if (cfg1 < 0)
+ return cfg1;
+
+ if (cfg1 & MII_CFG1_MASTER_SLAVE)
+ cfg = MASTER_SLAVE_CFG_MASTER_FORCE;
+ else
+ cfg = MASTER_SLAVE_CFG_SLAVE_FORCE;
+
if (phydev->link) {
ret = phy_read(phydev, MII_COMMSTAT);
if (ret < 0)
@@ -237,6 +276,8 @@ static int tja11xx_read_status(struct phy_device *phydev)
phydev->link = 0;
}

+ phydev->master_slave_get = cfg;
+
return 0;
}

@@ -504,6 +545,7 @@ static struct phy_driver tja11xx_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
+ .config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
.suspend = genphy_suspend,
@@ -519,6 +561,7 @@ static struct phy_driver tja11xx_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
.probe = tja11xx_probe,
.soft_reset = tja11xx_soft_reset,
+ .config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
.suspend = genphy_suspend,
@@ -533,6 +576,7 @@ static struct phy_driver tja11xx_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
.probe = tja1102_p0_probe,
.soft_reset = tja11xx_soft_reset,
+ .config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
.match_phy_device = tja1102_p0_match_phy_device,
@@ -551,6 +595,7 @@ static struct phy_driver tja11xx_driver[] = {
.features = PHY_BASIC_T1_FEATURES,
/* currently no probe for Port 1 is need */
.soft_reset = tja11xx_soft_reset,
+ .config_aneg = tja11xx_config_aneg,
.config_init = tja11xx_config_init,
.read_status = tja11xx_read_status,
.match_phy_device = tja1102_p1_match_phy_device,
--
2.26.2