[PATCH 09/37] docs: networking: convert xfrm_sync.txt to ReST
From: Mauro Carvalho Chehab
Date: Fri May 01 2020 - 10:45:17 EST
- add SPDX header;
- add a document title;
- adjust titles and chapters, adding proper markups;
- mark code blocks and literals as such;
- adjust identation, whitespaces and blank lines where needed;
- add to networking/index.rst.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
Documentation/networking/index.rst | 1 +
.../{xfrm_sync.txt => xfrm_sync.rst} | 66 ++++++++++++-------
2 files changed, 44 insertions(+), 23 deletions(-)
rename Documentation/networking/{xfrm_sync.txt => xfrm_sync.rst} (82%)
diff --git a/Documentation/networking/index.rst b/Documentation/networking/index.rst
index 3fe70efb632e..ec83bd95e4e9 100644
--- a/Documentation/networking/index.rst
+++ b/Documentation/networking/index.rst
@@ -119,6 +119,7 @@ Contents:
x25
xfrm_device
xfrm_proc
+ xfrm_sync
.. only:: subproject and html
diff --git a/Documentation/networking/xfrm_sync.txt b/Documentation/networking/xfrm_sync.rst
similarity index 82%
rename from Documentation/networking/xfrm_sync.txt
rename to Documentation/networking/xfrm_sync.rst
index 8d88e0f2ec49..6246503ceab2 100644
--- a/Documentation/networking/xfrm_sync.txt
+++ b/Documentation/networking/xfrm_sync.rst
@@ -1,3 +1,8 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+====
+XFRM
+====
The sync patches work is based on initial patches from
Krisztian <hidden@xxxxxxxxxx> and others and additional patches
@@ -40,30 +45,32 @@ The netlink message types are:
XFRM_MSG_NEWAE and XFRM_MSG_GETAE.
A XFRM_MSG_GETAE does not have TLVs.
+
A XFRM_MSG_NEWAE will have at least two TLVs (as is
discussed further below).
-aevent_id structure looks like:
+aevent_id structure looks like::
struct xfrm_aevent_id {
- struct xfrm_usersa_id sa_id;
- xfrm_address_t saddr;
- __u32 flags;
- __u32 reqid;
+ struct xfrm_usersa_id sa_id;
+ xfrm_address_t saddr;
+ __u32 flags;
+ __u32 reqid;
};
The unique SA is identified by the combination of xfrm_usersa_id,
reqid and saddr.
flags are used to indicate different things. The possible
-flags are:
- XFRM_AE_RTHR=1, /* replay threshold*/
- XFRM_AE_RVAL=2, /* replay value */
- XFRM_AE_LVAL=4, /* lifetime value */
- XFRM_AE_ETHR=8, /* expiry timer threshold */
- XFRM_AE_CR=16, /* Event cause is replay update */
- XFRM_AE_CE=32, /* Event cause is timer expiry */
- XFRM_AE_CU=64, /* Event cause is policy update */
+flags are::
+
+ XFRM_AE_RTHR=1, /* replay threshold*/
+ XFRM_AE_RVAL=2, /* replay value */
+ XFRM_AE_LVAL=4, /* lifetime value */
+ XFRM_AE_ETHR=8, /* expiry timer threshold */
+ XFRM_AE_CR=16, /* Event cause is replay update */
+ XFRM_AE_CE=32, /* Event cause is timer expiry */
+ XFRM_AE_CU=64, /* Event cause is policy update */
How these flags are used is dependent on the direction of the
message (kernel<->user) as well the cause (config, query or event).
@@ -80,23 +87,27 @@ to get notified of these events.
-----------------------------------------
a) byte value (XFRMA_LTIME_VAL)
+
This TLV carries the running/current counter for byte lifetime since
last event.
b)replay value (XFRMA_REPLAY_VAL)
+
This TLV carries the running/current counter for replay sequence since
last event.
c)replay threshold (XFRMA_REPLAY_THRESH)
+
This TLV carries the threshold being used by the kernel to trigger events
when the replay sequence is exceeded.
d) expiry timer (XFRMA_ETIMER_THRESH)
+
This is a timer value in milliseconds which is used as the nagle
value to rate limit the events.
3) Default configurations for the parameters:
-----------------------------------------------
+---------------------------------------------
By default these events should be turned off unless there is
at least one listener registered to listen to the multicast
@@ -108,6 +119,7 @@ we also provide default threshold values for these different parameters
in case they are not specified.
the two sysctls/proc entries are:
+
a) /proc/sys/net/core/sysctl_xfrm_aevent_etime
used to provide default values for the XFRMA_ETIMER_THRESH in incremental
units of time of 100ms. The default is 10 (1 second)
@@ -120,37 +132,45 @@ in incremental packet count. The default is two packets.
----------------
a) XFRM_MSG_GETAE issued by user-->kernel.
-XFRM_MSG_GETAE does not carry any TLVs.
+ XFRM_MSG_GETAE does not carry any TLVs.
+
The response is a XFRM_MSG_NEWAE which is formatted based on what
XFRM_MSG_GETAE queried for.
+
The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
-*if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved
-*if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved
+* if XFRM_AE_RTHR flag is set, then XFRMA_REPLAY_THRESH is also retrieved
+* if XFRM_AE_ETHR flag is set, then XFRMA_ETIMER_THRESH is also retrieved
b) XFRM_MSG_NEWAE is issued by either user space to configure
-or kernel to announce events or respond to a XFRM_MSG_GETAE.
+ or kernel to announce events or respond to a XFRM_MSG_GETAE.
i) user --> kernel to configure a specific SA.
+
any of the values or threshold parameters can be updated by passing the
appropriate TLV.
+
A response is issued back to the sender in user space to indicate success
or failure.
+
In the case of success, additionally an event with
XFRM_MSG_NEWAE is also issued to any listeners as described in iii).
ii) kernel->user direction as a response to XFRM_MSG_GETAE
+
The response will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+
The threshold TLVs will be included if explicitly requested in
the XFRM_MSG_GETAE message.
iii) kernel->user to report as event if someone sets any values or
-thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above).
-In such a case XFRM_AE_CU flag is set to inform the user that
-the change happened as a result of an update.
-The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
+ thresholds for an SA using XFRM_MSG_NEWAE (as described in #i above).
+ In such a case XFRM_AE_CU flag is set to inform the user that
+ the change happened as a result of an update.
+ The message will always have XFRMA_LTIME_VAL and XFRMA_REPLAY_VAL TLVs.
iv) kernel->user to report event when replay threshold or a timeout
-is exceeded.
+ is exceeded.
+
In such a case either XFRM_AE_CR (replay exceeded) or XFRM_AE_CE (timeout
happened) is set to inform the user what happened.
Note the two flags are mutually exclusive.
--
2.25.4