Re: [PATCH v3 06/11] iio: light: cm32181: Handle CM3218 ACPI devices with 2 I2C resources
From: Hans de Goede
Date: Mon May 04 2020 - 05:52:55 EST
Hi,
On 5/3/20 1:04 PM, Jonathan Cameron wrote:
On Tue, 28 Apr 2020 19:29:18 +0200
Hans de Goede <hdegoede@xxxxxxxxxx> wrote:
Some ACPI systems list 2 I2C resources for the CM3218 sensor. On these
systems the first I2cSerialBus ACPI-resource points to the SMBus Alert
Response Address (ARA, 0x0c) and the second I2cSerialBus ACPI-resource
points to the actual CM3218 sensor address:
Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings
{
Name (SBUF, ResourceTemplate ()
{
I have a vague recollection that we had case of this where they could
come in either order. Could that happen here?
Not to the best of my knowledge. I've only seen this
construct on a couple of Asus models and they are all consistent.
My mind may be playing tricks on me of course and that may never
happen...
Did I ever mention how much the lack of spec for some of these corner
cases annoys me?
Yes I think you have mentioned before. Unfortunately there
is nothing we can do about this, but I hear you.
Regards,
Hans
J
I2cSerialBusV2 (0x000C, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C3",
0x00, ResourceConsumer, , Exclusive,
)
I2cSerialBusV2 (0x0048, ControllerInitiated, 0x00061A80,
AddressingMode7Bit, "\\_SB.I2C3",
0x00, ResourceConsumer, , Exclusive,
)
Interrupt (ResourceConsumer, Level, ActiveHigh, Exclusive, ,, )
{
0x00000033,
}
})
Return (SBUF) /* \_SB_.I2C3.ALSD._CRS.SBUF */
}
Detect this and take the following step to deal with it:
1. When a SMBus Alert capable sensor has an Alert asserted, it will
not respond on its actual I2C address. Read a byte from the ARA
to clear any pending Alerts.
2. Create a "dummy" client for the actual I2C address and
use that client to communicate with the sensor.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
Changes in v3:
- Create and use a dummy client instead of relying on i2c-multi-instantiate
to create 2 separate clients for the 2 I2C resources
Changes in v2
- s/i2c_client-s/I2C clients/ in added comment
---
drivers/iio/light/cm32181.c | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)
diff --git a/drivers/iio/light/cm32181.c b/drivers/iio/light/cm32181.c
index 8fe49610fc26..c23a5c3a86a3 100644
--- a/drivers/iio/light/cm32181.c
+++ b/drivers/iio/light/cm32181.c
@@ -51,6 +51,8 @@
#define CM32181_CALIBSCALE_RESOLUTION 1000
#define MLUX_PER_LUX 1000
+#define SMBUS_ALERT_RESPONSE_ADDRESS 0x0c
+
static const u8 cm32181_reg[CM32181_CONF_REG_NUM] = {
CM32181_REG_ADDR_CMD,
};
@@ -335,6 +337,26 @@ static int cm32181_probe(struct i2c_client *client)
if (!indio_dev)
return -ENOMEM;
+ /*
+ * Some ACPI systems list 2 I2C resources for the CM3218 sensor, the
+ * SMBus Alert Response Address (ARA, 0x0c) and the actual I2C address.
+ * Detect this and take the following step to deal with it:
+ * 1. When a SMBus Alert capable sensor has an Alert asserted, it will
+ * not respond on its actual I2C address. Read a byte from the ARA
+ * to clear any pending Alerts.
+ * 2. Create a "dummy" client for the actual I2C address and
+ * use that client to communicate with the sensor.
+ */
+ if (ACPI_HANDLE(dev) && client->addr == SMBUS_ALERT_RESPONSE_ADDRESS) {
+ struct i2c_board_info board_info = { .type = "dummy" };
+
+ i2c_smbus_read_byte(client);
+
+ client = i2c_acpi_new_device(dev, 1, &board_info);
+ if (IS_ERR(client))
+ return PTR_ERR(client);
+ }
+
cm32181 = iio_priv(indio_dev);
cm32181->client = client;