Re: [PATCH v4 08/12] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros

[Bjorn Helgaas]

On Thu, Apr 30, 2020 at 10:06:21AM +0200, Pali Rohár wrote:
> PCI-E capability macros are already defined in linux/pci_regs.h.
> Remove their reimplementation in pcie-aardvark.

s/PCI-E/PCIe/

I mentioned this last time, but I guess you missed it.

> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> ---
>  drivers/pci/controller/pci-aardvark.c | 41 ++++++++++++---------------
>  1 file changed, 18 insertions(+), 23 deletions(-)
> 
> diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
> index 053ae6c19a3d..c53ae2511a9c 100644
> --- a/drivers/pci/controller/pci-aardvark.c
> +++ b/drivers/pci/controller/pci-aardvark.c
> @@ -34,17 +34,6 @@
>  #define     PCIE_CORE_CMD_MEM_IO_REQ_EN				BIT(2)
>  #define PCIE_CORE_DEV_REV_REG					0x8
>  #define PCIE_CORE_PCIEXP_CAP					0xc0
> -#define PCIE_CORE_DEV_CTRL_STATS_REG				0xc8
> -#define     PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE	(0 << 4)
> -#define     PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT	5
> -#define     PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE		(0 << 11)
> -#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT	12
> -#define     PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ		0x2
> -#define PCIE_CORE_LINK_CTRL_STAT_REG				0xd0
> -#define     PCIE_CORE_LINK_L0S_ENTRY				BIT(0)
> -#define     PCIE_CORE_LINK_TRAINING				BIT(5)
> -#define     PCIE_CORE_LINK_SPEED_SHIFT				16
> -#define     PCIE_CORE_LINK_WIDTH_SHIFT				20
>  #define PCIE_CORE_ERR_CAPCTL_REG				0x118
>  #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX			BIT(5)
>  #define     PCIE_CORE_ERR_CAPCTL_ECRC_CHK_TX_EN			BIT(6)
> @@ -223,6 +212,11 @@ static inline u32 advk_readl(struct advk_pcie *pcie, u64 reg)
>  	return readl(pcie->base + reg);
>  }
>  
> +static inline u16 advk_read16(struct advk_pcie *pcie, u64 reg)
> +{
> +	return advk_readl(pcie, (reg & ~0x3)) >> ((reg & 0x3) * 8);
> +}
> +
>  static int advk_pcie_link_up(struct advk_pcie *pcie)
>  {
>  	u32 val, ltssm_state;
> @@ -286,16 +280,16 @@ static int advk_pcie_train_at_gen(struct advk_pcie *pcie, int gen)
>  	 * Start link training immediately after enabling it.
>  	 * This solves problems for some buggy cards.
>  	 */
> -	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> -	reg |= PCIE_CORE_LINK_TRAINING;
> -	advk_writel(pcie, reg, PCIE_CORE_LINK_CTRL_STAT_REG);
> +	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
> +	reg |= PCI_EXP_LNKCTL_RL;
> +	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKCTL);
>  
>  	ret = advk_pcie_wait_for_link(pcie);
>  	if (ret)
>  		return ret;
>  
> -	reg = advk_readl(pcie, PCIE_CORE_LINK_CTRL_STAT_REG);
> -	neg_gen = (reg >> PCIE_CORE_LINK_SPEED_SHIFT) & 0xf;
> +	reg = advk_read16(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_LNKSTA);
> +	neg_gen = reg & PCI_EXP_LNKSTA_CLS;
>  
>  	return neg_gen;
>  }
> @@ -385,13 +379,14 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
>  		PCIE_CORE_ERR_CAPCTL_ECRC_CHCK_RCV;
>  	advk_writel(pcie, reg, PCIE_CORE_ERR_CAPCTL_REG);
>  
> -	/* Set PCIe Device Control and Status 1 PF0 register */
> -	reg = PCIE_CORE_DEV_CTRL_STATS_RELAX_ORDER_DISABLE |
> -		(7 << PCIE_CORE_DEV_CTRL_STATS_MAX_PAYLOAD_SZ_SHIFT) |
> -		PCIE_CORE_DEV_CTRL_STATS_SNOOP_DISABLE |
> -		(PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SZ <<
> -		 PCIE_CORE_DEV_CTRL_STATS_MAX_RD_REQ_SIZE_SHIFT);
> -	advk_writel(pcie, reg, PCIE_CORE_DEV_CTRL_STATS_REG);
> +	/* Set PCIe Device Control register */
> +	reg = advk_readl(pcie, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
> +	reg &= ~PCI_EXP_DEVCTL_RELAX_EN;
> +	reg &= ~PCI_EXP_DEVCTL_NOSNOOP_EN;
> +	reg &= ~PCI_EXP_DEVCTL_READRQ;
> +	reg |= PCI_EXP_DEVCTL_PAYLOAD; /* Set max payload size */
> +	reg |= PCI_EXP_DEVCTL_READRQ_512B;
> +	advk_writel(pcie, reg, PCIE_CORE_PCIEXP_CAP + PCI_EXP_DEVCTL);
>  
>  	/* Program PCIe Control 2 to disable strict ordering */
>  	reg = PCIE_CORE_CTRL2_RESERVED |
> -- 
> 2.20.1
>