[PATCH 4.19 36/37] mmc: meson-mx-sdio: Set MMC_CAP_WAIT_WHILE_BUSY

From: Greg Kroah-Hartman
Date: Mon May 04 2020 - 14:02:26 EST


From: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>

commit e53b868b3cf5beeaa2f851ec6740112bf4d6a8cb upstream.

The Meson SDIO controller uses the DAT0 lane for hardware busy
detection. Set MMC_CAP_WAIT_WHILE_BUSY accordingly. This fixes
the following error observed with Linux 5.7 (pre-rc-1):
mmc1: Card stuck being busy! __mmc_poll_for_busy
blk_update_request: I/O error, dev mmcblk1, sector 17111080 op
0x3:(DISCARD) flags 0x0 phys_seg 1 prio class 0

Fixes: ed80a13bb4c4c9 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20200416183513.993763-2-martin.blumenstingl@xxxxxxxxxxxxxx
Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

---
drivers/mmc/host/meson-mx-sdio.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

--- a/drivers/mmc/host/meson-mx-sdio.c
+++ b/drivers/mmc/host/meson-mx-sdio.c
@@ -573,7 +573,7 @@ static int meson_mx_mmc_add_host(struct
mmc->f_max = clk_round_rate(host->cfg_div_clk,
clk_get_rate(host->parent_clk));

- mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23;
+ mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23 | MMC_CAP_WAIT_WHILE_BUSY;
mmc->ops = &meson_mx_mmc_ops;

ret = mmc_of_parse(mmc);