Re: [PATCH v2 3/4] clk: Add Baikal-T1 CCU PLLs driver

From: Serge Semin
Date: Wed May 06 2020 - 18:36:44 EST


Hello,

On Wed, May 06, 2020 at 03:27:57PM -0700, Randy Dunlap wrote:
> Hi,
>
> Typo(s):
>
> On 5/6/20 3:22 PM, Serge Semin wrote:
> > diff --git a/drivers/clk/baikal-t1/Kconfig b/drivers/clk/baikal-t1/Kconfig
> > new file mode 100644
> > index 000000000000..e1257af9f49e
> > --- /dev/null
> > +++ b/drivers/clk/baikal-t1/Kconfig
> > @@ -0,0 +1,30 @@
> > +# SPDX-License-Identifier: GPL-2.0-only
> > +config CLK_BAIKAL_T1
> > + bool "Baikal-T1 Clocks Control Unit interface"
> > + depends on (MIPS_BAIKAL_T1 && OF) || COMPILE_TEST
> > + default MIPS_BAIKAL_T1
> > + help
> > + Clocks Control Unit is the core of Baikal-T1 SoC System Controller
> > + responsible for the chip subsystems clocking and resetting. It
> > + consists of multiple global clock domains, which can be reset by
> > + means of the CCU control registers. These domains and devices placed
> > + in them are fed with clocks generated by a hierarchy of PLLs,
> > + configurable and fixed clock dividers. Enable this option to be able
> > + to select Baikal-T1 CCU PLLs and Dividers drivers.
> > +
> > +if CLK_BAIKAL_T1
> > +
> > +config CLK_BT1_CCU_PLL
> > + bool "Baikal-T1 CCU PLLs support"
> > + select MFD_SYSCON
> > + default MIPS_BAIKAL_T1
> > + help
> > + Enable this to support the PLLs embedded into the Baikal-T1 SoC
> > + System Controller. These are five PLLs placed at the root of the
> > + clocks hierarchy, right after an external reference osciallator
>
> oscillator

Fixed. Thanks.

>
> > + (normally of 25MHz). They are used to generate high frequency
> > + signals, which are either directly wired to the consumers (like
> > + CPUs, DDR, etc) or passed over the clock dividers to be only then
>
> and while you are here:
>
> etc.)

Thanks again.

-Sergey

>
> > + used as an individual reference clock of a target device.
> > +
> > +endif
>
> thanks.
> --
> ~Randy
>