[PATCH v2 6/6] media: dt-bindings: ov5647: Add property for non-continuous clock

From: Roman Kovalivskyi
Date: Mon May 18 2020 - 21:17:13 EST


Add optional clock-noncontinuous property to configure whether the
clock is continuous or not.

Signed-off-by: Roman Kovalivskyi <roman.kovalivskyi@xxxxxxxxxxxxxxx>
---
Documentation/devicetree/bindings/media/i2c/ov5647.txt | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
index 70f06c24f470..fefba0a69b07 100644
--- a/Documentation/devicetree/bindings/media/i2c/ov5647.txt
+++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt
@@ -12,6 +12,8 @@ Required properties:

Optional Properties:
- pwdn-gpios: reference to the GPIO connected to the pwdn pin, if any.
+- clock-noncontinuous: presence of this boolean property decides whether the
+ MIPI CSI-2 clock is continuous or non-continuous.

The common video interfaces bindings (see video-interfaces.txt) should be
used to specify link to the image data receiver. The OV5647 device
@@ -33,6 +35,7 @@ Example:
port {
camera_1: endpoint {
remote-endpoint = <&csi1_ep1>;
+ clock-noncontinuous;
};
};
};
--
2.17.1