[tip: x86/entry] x86/entry/common: Provide idtentry_enter/exit()

From: tip-bot2 for Thomas Gleixner
Date: Tue May 19 2020 - 15:59:01 EST


The following commit has been merged into the x86/entry branch of tip:

Commit-ID: eadb831607477ba774b3314bdc956331b41817d6
Gitweb: https://git.kernel.org/tip/eadb831607477ba774b3314bdc956331b41817d6
Author: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
AuthorDate: Thu, 26 Mar 2020 16:28:52 +01:00
Committer: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
CommitterDate: Tue, 19 May 2020 16:03:57 +02:00

x86/entry/common: Provide idtentry_enter/exit()

Provide functions which handle the low level entry and exit similar to
enter/exit from user mode.

Signed-off-by: Thomas Gleixner <tglx@xxxxxxxxxxxxx>
Reviewed-by: Alexandre Chartre <alexandre.chartre@xxxxxxxxxx>
Acked-by: Peter Zijlstra <peterz@xxxxxxxxxxxxx>
Acked-by: Andy Lutomirski <luto@xxxxxxxxxx>
Link: https://lkml.kernel.org/r/20200505134904.457578656@xxxxxxxxxxxxx


---
arch/x86/entry/common.c | 99 +++++++++++++++++++++++++++++++-
arch/x86/include/asm/idtentry.h | 3 +-
2 files changed, 102 insertions(+)

diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
index e4f9f5f..9ebe334 100644
--- a/arch/x86/entry/common.c
+++ b/arch/x86/entry/common.c
@@ -510,3 +510,102 @@ SYSCALL_DEFINE0(ni_syscall)
{
return -ENOSYS;
}
+
+/**
+ * idtentry_enter - Handle state tracking on idtentry
+ * @regs: Pointer to pt_regs of interrupted context
+ *
+ * Invokes:
+ * - lockdep irqflag state tracking as low level ASM entry disabled
+ * interrupts.
+ *
+ * - Context tracking if the exception hit user mode.
+ *
+ * - RCU notification if the exception hit kernel mode.
+ *
+ * - The hardirq tracer to keep the state consistent as low level ASM
+ * entry disabled interrupts.
+ */
+void noinstr idtentry_enter(struct pt_regs *regs)
+{
+ if (user_mode(regs)) {
+ enter_from_user_mode();
+ } else {
+ lockdep_hardirqs_off(CALLER_ADDR0);
+ rcu_irq_enter();
+ instrumentation_begin();
+ trace_hardirqs_off_prepare();
+ instrumentation_end();
+ }
+}
+
+/**
+ * idtentry_exit - Common code to handle return from exceptions
+ * @regs: Pointer to pt_regs (exception entry regs)
+ *
+ * Depending on the return target (kernel/user) this runs the necessary
+ * preemption and work checks if possible and required and returns to
+ * the caller with interrupts disabled and no further work pending.
+ *
+ * This is the last action before returning to the low level ASM code which
+ * just needs to return to the appropriate context.
+ *
+ * Invoked by all exception/interrupt IDTENTRY handlers which are not
+ * returning through the paranoid exit path (all except NMI, #DF and the IST
+ * variants of #MC and #DB) and are therefore on the thread stack.
+ */
+void noinstr idtentry_exit(struct pt_regs *regs)
+{
+ lockdep_assert_irqs_disabled();
+
+ /* Check whether this returns to user mode */
+ if (user_mode(regs)) {
+ prepare_exit_to_usermode(regs);
+ } else if (regs->flags & X86_EFLAGS_IF) {
+ /* Check kernel preemption, if enabled */
+ if (IS_ENABLED(CONFIG_PREEMPTION)) {
+ /*
+ * This needs to be done very carefully.
+ * idtentry_enter() invoked rcu_irq_enter(). This
+ * needs to be undone before scheduling.
+ *
+ * Preemption is disabled inside of RCU idle
+ * sections. When the task returns from
+ * preempt_schedule_irq(), RCU is still watching.
+ *
+ * rcu_irq_exit_preempt() has additional state
+ * checking if CONFIG_PROVE_RCU=y
+ */
+ if (!preempt_count()) {
+ if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
+ WARN_ON_ONCE(!on_thread_stack());
+ instrumentation_begin();
+ rcu_irq_exit_preempt();
+ if (need_resched())
+ preempt_schedule_irq();
+ /* Covers both tracing and lockdep */
+ trace_hardirqs_on();
+ instrumentation_end();
+ return;
+ }
+ }
+ /*
+ * If preemption is disabled then this needs to be done
+ * carefully with respect to RCU. The exception might come
+ * from a RCU idle section in the idle task due to the fact
+ * that safe_halt() enables interrupts. So this needs the
+ * same ordering of lockdep/tracing and RCU as the return
+ * to user mode path.
+ */
+ instrumentation_begin();
+ /* Tell the tracer that IRET will enable interrupts */
+ trace_hardirqs_on_prepare();
+ lockdep_hardirqs_on_prepare(CALLER_ADDR0);
+ instrumentation_end();
+ rcu_irq_exit();
+ lockdep_hardirqs_on(CALLER_ADDR0);
+ } else {
+ /* IRQ flags state is correct already. Just tell RCU */
+ rcu_irq_exit();
+ }
+}
diff --git a/arch/x86/include/asm/idtentry.h b/arch/x86/include/asm/idtentry.h
index bbd81e2..2adfd80 100644
--- a/arch/x86/include/asm/idtentry.h
+++ b/arch/x86/include/asm/idtentry.h
@@ -7,6 +7,9 @@

#ifndef __ASSEMBLY__

+void idtentry_enter(struct pt_regs *regs);
+void idtentry_exit(struct pt_regs *regs);
+
/**
* DECLARE_IDTENTRY - Declare functions for simple IDT entry points
* No error code pushed by hardware