Re: [PATCH v3] dma: Fix max PFN arithmetic overflow on 32 bit systems
From: Greg KH
Date: Wed May 27 2020 - 05:06:23 EST
On Tue, May 26, 2020 at 07:57:49PM +0200, Alexander Dahl wrote:
> The intermediate result of the old term (4UL * 1024 * 1024 * 1024) is
> 4 294 967 296 or 0x100000000 which is no problem on 64 bit systems. The
> patch does not change the later overall result of 0x100000 for
> MAX_DMA32_PFN. The new calculation yields the same result, but does not
> require 64 bit arithmetic.
> On 32 bit systems the old calculation suffers from an arithmetic
> overflow in that intermediate term in braces: 4UL aka unsigned long int
> is 4 byte wide and an arithmetic overflow happens (the 0x100000000 does
> not fit in 4 bytes), the in braces result is truncated to zero, the
> following right shift does not alter that, so MAX_DMA32_PFN evaluates to
> 0 on 32 bit systems.
> That wrong value is a problem in a comparision against MAX_DMA32_PFN in
> the init code for swiotlb in 'pci_swiotlb_detect_4gb()' to decide if
> swiotlb should be active. That comparison yields the opposite result,
> when compiling on 32 bit systems.
> This was not possible before 1b7e03ef7570 ("x86, NUMA: Enable emulation
> on 32bit too") when that MAX_DMA32_PFN was first made visible to x86_32
> (and which landed in v3.0).
> In practice this wasn't a problem, unless you activated CONFIG_SWIOTLB
> on x86 (32 bit).
> However for ARCH=x86 (32 bit) and if you have set CONFIG_IOMMU_INTEL,
> since c5a5dc4cbbf4 ("iommu/vt-d: Don't switch off swiotlb if bounce page
> is used") there's a dependency on CONFIG_SWIOTLB, which was not
> necessarily active before. That landed in v5.4, where we noticed it in
> the fli4l Linux distribution. We have CONFIG_IOMMU_INTEL active on both
> 32 and 64 bit kernel configs there (I could not find out why, so let's
> just say historical reasons).
> The effect is at boot time 64 MiB (default size) were allocated for
> bounce buffers now, which is a noticeable amount of memory on small
> systems like pcengines ALIX 2D3 with 256 MiB memory, which are still
> frequently used as home routers.
> We noticed this effect when migrating from kernel v4.19 (LTS) to v5.4
> (LTS) in fli4l and got that kernel messages for example:
> Linux version 5.4.22 (buildroot@buildroot) (gcc version 7.3.0 (Buildroot 2018.02.8)) #1 SMP Mon Nov 26 23:40:00 CET 2018
> Memory: 183484K/261756K available (4594K kernel code, 393K rwdata, 1660K rodata, 536K init, 456K bss , 78272K reserved, 0K cma-reserved, 0K highmem)
> PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> software IO TLB: mapped [mem 0x0bb78000-0x0fb78000] (64MB)
> The initial analysis and the suggested fix was done by user 'sourcejedi'
> at stackoverflow and explicitly marked as GPLv2 for inclusion in the
> Linux kernel:
> The new calculation, which does not suffer from that overflow, is the
> same as for arch/mips now as suggested by Robin Murphy.
> The fix was tested by fli4l users on round about two dozen different
> systems, including both 32 and 64 bit archs, bare metal and virtualized
> Fixes: 1b7e03ef7570 ("x86, NUMA: Enable emulation on 32bit too")
> Fixes: https://web.nettworks.org/bugs/browse/FFL-2560
> Fixes: https://unix.stackexchange.com/q/520065/50007
> Reported-by: Alan Jenkins <alan.christopher.jenkins@xxxxxxxxx>
> Suggested-by: Robin Murphy <robin.murphy@xxxxxxx>
> Signed-off-by: Alexander Dahl <post@xxxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
Reviewed-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>