Re: [PATCH -tip] compiler_types.h: Optimize __unqual_scalar_typeof compilation time

From: Sedat Dilek
Date: Wed May 27 2020 - 15:11:24 EST


On Wed, May 27, 2020 at 3:57 PM Marco Elver <elver@xxxxxxxxxx> wrote:
>
> On Wed, 27 May 2020 at 15:37, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> >
> > On Wed, May 27, 2020 at 3:30 PM Marco Elver <elver@xxxxxxxxxx> wrote:
> > >
> > > On Wed, 27 May 2020 at 15:11, Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> > > >
> > > > On Wed, May 27, 2020 at 2:50 PM Arnd Bergmann <arnd@xxxxxxxx> wrote:
> > > > >
> > > > > On Wed, May 27, 2020 at 2:35 PM Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> > > > > > On Wed, May 27, 2020 at 2:31 PM Arnd Bergmann <arnd@xxxxxxxx> wrote:
> > > > > > > On Wed, May 27, 2020 at 1:36 PM Sedat Dilek <sedat.dilek@xxxxxxxxx> wrote:
> > > > > > > > On Wed, May 27, 2020 at 1:27 PM Arnd Bergmann <arnd@xxxxxxxx> wrote:
> > > > > > > > > On Wed, May 27, 2020 at 12:33 PM Marco Elver <elver@xxxxxxxxxx> wrote:
> > > > > > > > >
> > > > > > > > > This gives us back 80% of the performance drop on clang, and 50%
> > > > > > > > > of the drop I saw with gcc, compared to current mainline.
> > > > > > > > >
> > > > > > > > > Tested-by: Arnd Bergmann <arnd@xxxxxxxx>
> > > > > > > > >
> > > > > > > >
> > > > > > > > Hi Arnd,
> > > > > > > >
> > > > > > > > with "mainline" you mean Linux-next aka Linux v5.8 - not v5.7?
> > > > > > >
> > > > > > > I meant v5.7.
> > > > > > >
> > > > > > > > I have not seen __unqual_scalar_typeof(x) in compiler_types.h in Linux v5.7.
> > > > > > > >
> > > > > > > > Is there a speedup benefit also for Linux v5.7?
> > > > > > > > Which patches do I need?
> > > > > > >
> > > > > > > v5.7-rc is the baseline and is the fastest I currently see. On certain files,
> > > > > > > I saw an intermittent 10x slowdown that was already fixed earlier, now
> > > > > > > linux-next
> > > > > > > is more like 2x slowdown for me and 1.2x with this patch on top, so we're
> > > > > > > almost back to the speed of linux-5.7.
> > > > > > >
> > > > > >
> > > > > > Which clang version did you use - and have you set KCSAN kconfigs -
> > > > > > AFAICS this needs clang-11?
> > > > >
> > > > > I'm currently using clang-11, but I see the same problem with older
> > > > > versions, and both with and without KCSAN enabled. I think the issue
> > > > > is mostly the deep nesting of macros that leads to code bloat.
> > > > >
> > > >
> > > > Thanks.
> > > >
> > > > With clang-10:
> > > >
> > > > $ scripts/diffconfig /boot/config-5.7.0-rc7-2-amd64-clang .config
> > > > BUILD_SALT "5.7.0-rc7-2-amd64-clang" -> "5.7.0-rc7-3-amd64-clang"
> > > > +HAVE_ARCH_KCSAN y
> > >
> > > Clang 10 doesn't support KCSAN (HAVE_KCSAN_COMPILER unset).
> > >
> > > > With clang-11:
> > > >
> > > > $ scripts/diffconfig /boot/config-5.7.0-rc7-2-amd64-clang .config
> > > > BUILD_SALT "5.7.0-rc7-2-amd64-clang" -> "5.7.0-rc7-3-amd64-clang"
> > > > CLANG_VERSION 100001 -> 110000
> > > > +CC_HAS_ASM_INLINE y
> > > > +HAVE_ARCH_KCSAN y
> > > > +HAVE_KCSAN_COMPILER y
> > > > +KCSAN n
> > > >
> > > > Which KCSAN kconfigs did you enable?
> > >
> > > To clarify: as said in [1], KCSAN (or any other instrumentation) is no
> > > longer relevant to the issue here, and the compile-time regression is
> > > observable with most configs. The problem is due to pre-processing and
> > > parsing, which came about due to new READ_ONCE() and the
> > > __unqual_scalar_typeof() macro (which this patch optimizes).
> > >
> > > KCSAN and new ONCEs got tangled up because we first attempted to
> > > annotate {READ,WRITE}_ONCE() with data_race(), but that turned out to
> > > have all kinds of other issues (explanation in [2]). So we decided to
> > > drop all the KCSAN-specific bits from ONCE, and require KCSAN to be
> > > Clang 11. Those fixes were applied to the first version of new
> > > {READ,WRITE}_ONCE() in -tip, which actually restored the new ONCEs to
> > > the pre-KCSAN version (now that KCSAN can deal with them without
> > > annotations).
> > >
> > > Hope this makes more sense now.
> > >
> > > [1] https://lore.kernel.org/lkml/CANpmjNOUdr2UG3F45=JaDa0zLwJ5ukPc1MMKujQtmYSmQnjcXg@xxxxxxxxxxxxxx/
> > > [2] https://lore.kernel.org/lkml/20200521142047.169334-1-elver@xxxxxxxxxx/
> > >
> >
> > Thanks, Marco.
> >
> > I pulled tip.git#locking/kcsan on top of Linux v5.7-rc7 and applied this patch.
> > Just wanted to try KCSAN for the first time and it will also be my
> > first building with clang-11.
> > That's why I asked.
>
> In general, CONFIG_KCSAN=y and the defaults for the other KCSAN
> options should be good. Depending on the size of your system, you
> could also tweak KCSAN runtime performance:
> https://lwn.net/Articles/816850/#Interacting%20with%20KCSAN%20at%20Runtime
> -- the defaults should be good for most systems though.
> Hope this helps. Any more questions, do let me know.
>

Which "projects" and packages do I need?

I have installed:

# LC_ALL=C apt-get install llvm-11 clang-11 lld-11
--no-install-recommends -t llvm-toolchain -y

# dpkg -l | grep
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261 | awk
'/^ii/ {print $1 " " $2 " " $3}' | column -t
ii clang-11
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii libclang-common-11-dev
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii libclang-cpp11
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii libclang1-11
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii libllvm11:amd64
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii lld-11
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii llvm-11
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261
ii llvm-11-runtime
1:11~++20200527111130+65030821d4a-1~exp1~20200527091804.3261

Is that enough?

- Sedat -