Re: [PATCH 1/2] dt-bindings: sound: tlv320adcx140: Add GPI config property

[Rob Herring]

On Tue, May 26, 2020 at 03:09:16PM -0500, Dan Murphy wrote:
> Add an array property that configures the General Purpose Input (GPI)
> register.  The device has 4 GPI pins and each pin can be configured in 1
> of 7 different ways.

Dan seems to have trouble running get_maintainers.pl and Cc'ing the DT 
list. Running 'make dt_binding_check' also seems to be a problem. Now 
linux-next has these warnings:

/builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/sound/tlv320adcx140.example.dt.yaml: codec@4c: ti,gpi-config:0:0: 4 is greater than the maximum of 1
/builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/sound/tlv320adcx140.example.dt.yaml: codec@4c: ti,gpi-config:0:1: 5 is greater than the maximum of 1
/builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/sound/tlv320adcx140.example.dt.yaml: codec@4c: ti,gpi-config:0:2: 6 is greater than the maximum of 1
/builds/robherring/linux-dt-bindings/Documentation/devicetree/bindings/sound/tlv320adcx140.example.dt.yaml: codec@4c: ti,gpi-config:0:3: 7 is greater than the maximum of 1

Please send a fix.

> 
> Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
> ---
>  .../bindings/sound/tlv320adcx140.yaml         | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> index daa6cc0e031b..e8a69b1c7ca9 100644
> --- a/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> +++ b/Documentation/devicetree/bindings/sound/tlv320adcx140.yaml
> @@ -86,6 +86,32 @@ properties:
>            maximum: 1
>          default: [0, 0, 0, 0]
>  
> +  ti,gpi-config:
> +    description: |
> +       Defines the configuration for the general purpose input pins (GPI).
> +       The array is defined as <GPI1 GPI2 GPI3 GPI4>.
> +
> +       0 - (default) disabled
> +       1 - GPIX is configured as a general-purpose input (GPI)
> +       2 - GPIX is configured as a master clock input (MCLK)
> +       3 - GPIX is configured as an ASI input for daisy-chain (SDIN)
> +       4 - GPIX is configured as a PDM data input for channel 1 and channel
> +            (PDMDIN1)
> +       5 - GPIX is configured as a PDM data input for channel 3 and channel
> +            (PDMDIN2)
> +       6 - GPIX is configured as a PDM data input for channel 5 and channel
> +            (PDMDIN3)
> +       7 - GPIX is configured as a PDM data input for channel 7 and channel
> +            (PDMDIN4)
> +
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> +      - minItems: 1
> +        maxItems: 4
> +        items:
> +          maximum: 1

I believe you want '7' here.

> +        default: [0, 0, 0, 0]
> +
>  required:
>    - compatible
>    - reg
> @@ -101,6 +127,7 @@ examples:
>          reg = <0x4c>;
>          ti,mic-bias-source = <6>;
>          ti,pdm-edge-select = <0 1 0 1>;
> +        ti,gpi-config = <4 5 6 7>;
>          reset-gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
>        };
>      };
> -- 
> 2.26.2
>