[PATCH 2/3] cpufreq: brcmstb-avs-cpufreq: Support polling AVS firmware

From: Markus Mayer
Date: Thu May 28 2020 - 14:30:43 EST


From: Florian Fainelli <f.fainelli@xxxxxxxxx>

In case the interrupt towards the host is never raised, yet the AVS
firmware responds correctly within the alloted time, allow supporting a
polling mode.

Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: Markus Mayer <mmayer@xxxxxxxxxxxx>
---
drivers/cpufreq/brcmstb-avs-cpufreq.c | 47 +++++++++++++++++++--------
1 file changed, 34 insertions(+), 13 deletions(-)

diff --git a/drivers/cpufreq/brcmstb-avs-cpufreq.c b/drivers/cpufreq/brcmstb-avs-cpufreq.c
index c8b754694a5e..79a0538a531a 100644
--- a/drivers/cpufreq/brcmstb-avs-cpufreq.c
+++ b/drivers/cpufreq/brcmstb-avs-cpufreq.c
@@ -42,6 +42,7 @@
*/

#include <linux/cpufreq.h>
+#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
@@ -178,6 +179,7 @@ struct private_data {
struct completion done;
struct semaphore sem;
struct pmap pmap;
+ int host_irq;
};

static void __iomem *__map_region(const char *name)
@@ -195,12 +197,36 @@ static void __iomem *__map_region(const char *name)
return ptr;
}

+static unsigned long wait_for_avs_command(struct private_data *priv,
+ unsigned long timeout)
+{
+ unsigned long time_left = 0;
+ u32 val;
+
+ /* Event driven, wait for the command interrupt */
+ if (priv->host_irq >= 0)
+ return wait_for_completion_timeout(&priv->done,
+ msecs_to_jiffies(timeout));
+
+ /* Polling for command completion */
+ do {
+ time_left = timeout;
+ val = readl(priv->base + AVS_MBOX_STATUS);
+ if (val)
+ break;
+
+ usleep_range(1000, 2000);
+ } while (--timeout);
+
+ return time_left;
+}
+
static int __issue_avs_command(struct private_data *priv, unsigned int cmd,
unsigned int num_in, unsigned int num_out,
u32 args[])
{
- unsigned long time_left = msecs_to_jiffies(AVS_TIMEOUT);
void __iomem *base = priv->base;
+ unsigned long time_left;
unsigned int i;
int ret;
u32 val;
@@ -238,7 +264,7 @@ static int __issue_avs_command(struct private_data *priv, unsigned int cmd,
writel(AVS_CPU_L2_INT_MASK, priv->avs_intr_base + AVS_CPU_L2_SET0);

/* Wait for AVS co-processor to finish processing the command. */
- time_left = wait_for_completion_timeout(&priv->done, time_left);
+ time_left = wait_for_avs_command(priv, AVS_TIMEOUT);

/*
* If the AVS status is not in the expected range, it means AVS didn't
@@ -509,7 +535,7 @@ static int brcm_avs_prepare_init(struct platform_device *pdev)
{
struct private_data *priv;
struct device *dev;
- int host_irq, ret;
+ int ret;

dev = &pdev->dev;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
@@ -536,19 +562,14 @@ static int brcm_avs_prepare_init(struct platform_device *pdev)
goto unmap_base;
}

- host_irq = platform_get_irq_byname(pdev, BRCM_AVS_HOST_INTR);
- if (host_irq < 0) {
- dev_err(dev, "Couldn't find interrupt %s -- %d\n",
- BRCM_AVS_HOST_INTR, host_irq);
- ret = host_irq;
- goto unmap_intr_base;
- }
+ priv->host_irq = platform_get_irq_byname(pdev, BRCM_AVS_HOST_INTR);

- ret = devm_request_irq(dev, host_irq, irq_handler, IRQF_TRIGGER_RISING,
+ ret = devm_request_irq(dev, priv->host_irq, irq_handler,
+ IRQF_TRIGGER_RISING,
BRCM_AVS_HOST_INTR, priv);
- if (ret) {
+ if (ret && priv->host_irq >= 0) {
dev_err(dev, "IRQ request failed: %s (%d) -- %d\n",
- BRCM_AVS_HOST_INTR, host_irq, ret);
+ BRCM_AVS_HOST_INTR, priv->host_irq, ret);
goto unmap_intr_base;
}

--
2.17.1