[PATCH v2 0/4] mfd: lp87565: convert DT to yaml, ignore ENx pins and add LP87524-Q1

[Luca Ceresoli]

Hi,

the first patch in this series is a small but significant variation in how
the lp87565 driver enables the output rails, to allow the kernel to always
know when it is enabling an output. However it can change existing
behaviour (depending on the hardware setup) and thus it should be carefully
evaluated.

The following patches are a fairly straightforward addition of a new chip
variant along DT bindings conversion to yaml.

RFC,v1: https://lkml.org/lkml/2020/6/3/908

Luca

Luca Ceresoli (4):
  regulator: lp87565: enable voltage regardless of ENx pin
  dt-bindings: mfd: lp87565: convert to yaml
  dt-bindings: mfd: lp87565: add LP87524-Q1 variant
  mfd: lp87565: add LP87524-Q1 variant

 .../devicetree/bindings/mfd/lp87565.txt       |  79 -------
 .../devicetree/bindings/mfd/ti,lp875xx.yaml   | 213 ++++++++++++++++++
 drivers/mfd/lp87565.c                         |   4 +
 drivers/regulator/lp87565-regulator.c         |  21 +-
 include/linux/mfd/lp87565.h                   |   1 +
 5 files changed, 237 insertions(+), 81 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/mfd/lp87565.txt
 create mode 100644 Documentation/devicetree/bindings/mfd/ti,lp875xx.yaml

-- 
2.27.0