[RFC 1/4] media: atomisp: fix identation at I2C Kconfig menu

[Mauro Carvalho Chehab]

There are several bad whitespacing usage there. Remove them.

While here, place all Kconfig options for sensors at the
same place.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@xxxxxxxxxx>
---
 drivers/staging/media/atomisp/i2c/Kconfig     | 74 +++++++++++--------
 .../staging/media/atomisp/i2c/ov5693/Kconfig  | 12 ---
 2 files changed, 42 insertions(+), 44 deletions(-)
 delete mode 100644 drivers/staging/media/atomisp/i2c/ov5693/Kconfig

diff --git a/drivers/staging/media/atomisp/i2c/Kconfig b/drivers/staging/media/atomisp/i2c/Kconfig
index 7c7f0fc090b3..a772b833a85f 100644
--- a/drivers/staging/media/atomisp/i2c/Kconfig
+++ b/drivers/staging/media/atomisp/i2c/Kconfig
@@ -3,53 +3,51 @@
 # Kconfig for sensor drivers
 #
 
-source "drivers/staging/media/atomisp/i2c/ov5693/Kconfig"
-
 config VIDEO_ATOMISP_OV2722
-       tristate "OVT ov2722 sensor support"
+	tristate "OVT ov2722 sensor support"
 	depends on ACPI
-       depends on I2C && VIDEO_V4L2
+	depends on I2C && VIDEO_V4L2
 	help
-	 This is a Video4Linux2 sensor-level driver for the OVT
-	 OV2722 raw camera.
+	  This is a Video4Linux2 sensor-level driver for the OVT
+	  OV2722 raw camera.
 
-	 OVT is a 2M raw sensor.
+	  OVT is a 2M raw sensor.
 
-	 It currently only works with the atomisp driver.
+	  It currently only works with the atomisp driver.
 
 config VIDEO_ATOMISP_GC2235
-       tristate "Galaxy gc2235 sensor support"
+	tristate "Galaxy gc2235 sensor support"
 	depends on ACPI
-       depends on I2C && VIDEO_V4L2
+	depends on I2C && VIDEO_V4L2
 	help
-	 This is a Video4Linux2 sensor-level driver for the OVT
-	 GC2235 raw camera.
+	  This is a Video4Linux2 sensor-level driver for the OVT
+	  GC2235 raw camera.
 
-	 GC2235 is a 2M raw sensor.
+	  GC2235 is a 2M raw sensor.
 
-	 It currently only works with the atomisp driver.
+	  It currently only works with the atomisp driver.
 
 config VIDEO_ATOMISP_MSRLIST_HELPER
-       tristate "Helper library to load, parse and apply large register lists."
-       depends on I2C
+	tristate "Helper library to load, parse and apply large register lists."
+	depends on I2C
 	help
-	 This is a helper library to be used from a sensor driver to load, parse
-	 and apply large register lists.
+	  This is a helper library to be used from a sensor driver to load, parse
+	  and apply large register lists.
 
-	 To compile this driver as a module, choose M here: the
-	 module will be called libmsrlisthelper.
+	  To compile this driver as a module, choose M here: the
+	  module will be called libmsrlisthelper.
 
 config VIDEO_ATOMISP_MT9M114
-       tristate "Aptina mt9m114 sensor support"
+	tristate "Aptina mt9m114 sensor support"
 	depends on ACPI
-       depends on I2C && VIDEO_V4L2
+	depends on I2C && VIDEO_V4L2
 	help
-	 This is a Video4Linux2 sensor-level driver for the Micron
-	 mt9m114 1.3 Mpixel camera.
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  mt9m114 1.3 Mpixel camera.
 
-	 mt9m114 is video camera sensor.
+	  mt9m114 is video camera sensor.
 
-	 It currently only works with the atomisp driver.
+	  It currently only works with the atomisp driver.
 
 config VIDEO_ATOMISP_GC0310
 	tristate "GC0310 sensor support"
@@ -60,16 +58,28 @@ config VIDEO_ATOMISP_GC0310
 	  GC0310 0.3MP sensor.
 
 config VIDEO_ATOMISP_OV2680
-       tristate "Omnivision OV2680 sensor support"
+	tristate "Omnivision OV2680 sensor support"
 	depends on ACPI
-       depends on I2C && VIDEO_V4L2
+	depends on I2C && VIDEO_V4L2
 	help
-	 This is a Video4Linux2 sensor-level driver for the Omnivision
-	 OV2680 raw camera.
+	  This is a Video4Linux2 sensor-level driver for the Omnivision
+	  OV2680 raw camera.
 
-	 ov2680 is a 2M raw sensor.
+	  ov2680 is a 2M raw sensor.
 
-	 It currently only works with the atomisp driver.
+	  It currently only works with the atomisp driver.
+
+config VIDEO_ATOMISP_OV5693
+	tristate "Omnivision ov5693 sensor support"
+	depends on ACPI
+	depends on I2C && VIDEO_V4L2
+	help
+	  This is a Video4Linux2 sensor-level driver for the Micron
+	  ov5693 5 Mpixel camera.
+
+	  ov5693 is video camera sensor.
+
+	  It currently only works with the atomisp driver.
 
 #
 # Kconfig for flash drivers
diff --git a/drivers/staging/media/atomisp/i2c/ov5693/Kconfig b/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
deleted file mode 100644
index c8d09f416c35..000000000000
--- a/drivers/staging/media/atomisp/i2c/ov5693/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-config VIDEO_ATOMISP_OV5693
-       tristate "Omnivision ov5693 sensor support"
-	depends on ACPI
-       depends on I2C && VIDEO_V4L2
-	help
-	 This is a Video4Linux2 sensor-level driver for the Micron
-	 ov5693 5 Mpixel camera.
-
-	 ov5693 is video camera sensor.
-
-	 It currently only works with the atomisp driver.
-- 
2.26.2